On 08-03-21, 11:52, Liu Ying wrote:
> This patch allows LVDS PHYs to be configured through
> the generic functions and through a custom structure
> added to the generic union.
>
> The parameters added here are based on common LVDS PHY
> implementation practices. The set of parameters
> should cover all potential users.
>
> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
> v3->v4:
> * Add Robert's R-b tag.
>
> v2->v3:
> * No change.
>
> v1->v2:
> * No change.
>
> include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/phy/phy.h | 4 ++++
> 2 files changed, 52 insertions(+)
> create mode 100644 include/linux/phy/phy-lvds.h
>
> diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
> new file mode 100644
> index 00000000..1b5b9d6
> --- /dev/null
> +++ b/include/linux/phy/phy-lvds.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __PHY_LVDS_H_
> +#define __PHY_LVDS_H_
> +
> +/**
> + * struct phy_configure_opts_lvds - LVDS configuration set
> + *
> + * This structure is used to represent the configuration state of a
> + * LVDS phy.
> + */
> +struct phy_configure_opts_lvds {
> + /**
> + * @bits_per_lane_and_dclk_cycle:
> + *
> + * Number of bits per data lane and differential clock cycle.
> + */
Can we have these in kernel-doc style please, similar to style in linux/phy/phy.h
> + unsigned int bits_per_lane_and_dclk_cycle;
> +
> + /**
> + * @differential_clk_rate:
> + *
> + * Clock rate, in Hertz, of the LVDS differential clock.
> + */
> + unsigned long differential_clk_rate;
> +
> + /**
> + * @lanes:
> + *
> + * Number of active, consecutive, data lanes, starting from
> + * lane 0, used for the transmissions.
> + */
> + unsigned int lanes;
> +
> + /**
> + * @is_slave:
> + *
> + * Boolean, true if the phy is a slave which works together
> + * with a master phy to support dual link transmission,
> + * otherwise a regular phy or a master phy.
> + */
> + bool is_slave;
> +};
> +
> +#endif /* __PHY_LVDS_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index e435bdb..d450b44 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
> #include <linux/regulator/consumer.h>
>
> #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-lvds.h>
> #include <linux/phy/phy-mipi-dphy.h>
>
> struct phy;
> @@ -51,10 +52,13 @@ enum phy_mode {
> * the MIPI_DPHY phy mode.
> * @dp: Configuration set applicable for phys supporting
> * the DisplayPort protocol.
> + * @lvds: Configuration set applicable for phys supporting
> + * the LVDS phy mode.
> */
> union phy_configure_opts {
> struct phy_configure_opts_mipi_dphy mipi_dphy;
> struct phy_configure_opts_dp dp;
> + struct phy_configure_opts_lvds lvds;
> };
>
> /**
> --
> 2.7.4
--
~Vinod
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
