Re: dri-devel Digest, Vol 132, Issue 196

[chatzem <chatzem@xxxxxxxxxxxxxx>]

Sent from ProtonMail mobile



-------- Original Message --------
On Mar 10, 2021, 12:10, < dri-devel-request@xxxxxxxxxxxxxxxxxxxxx> wrote:

Send dri-devel mailing list submissions to
dri-devel@xxxxxxxxxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.freedesktop.org/mailman/listinfo/dri-devel
or, via email, send a message with subject or body 'help' to
dri-devel-request@xxxxxxxxxxxxxxxxxxxxx

You can reach the person managing the list at
dri-devel-owner@xxxxxxxxxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of dri-devel digest..."

Today's Topics:

1. [PATCH v5 10/14] drm/bridge: imx: Add LDB driver helper
support (Liu Ying)
2. [PATCH v5 11/14] dt-bindings: display: bridge: Add
i.MX8qm/qxp LVDS display bridge binding (Liu Ying)

----------------------------------------------------------------------

Message: 1
Date: Wed, 10 Mar 2021 17:55:34 +0800
From: Liu Ying <victor.liu@xxxxxxx>
To: dri-devel@xxxxxxxxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx,
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx,
linux-media@xxxxxxxxxxxxxxx
Cc: airlied@xxxxxxxx, daniel@xxxxxxxx, robh+dt@xxxxxxxxxx,
shawnguo@xxxxxxxxxx, s.hauer@xxxxxxxxxxxxxx, kernel@xxxxxxxxxxxxxx,
festevam@xxxxxxxxx, linux-imx@xxxxxxx, mchehab@xxxxxxxxxx,
a.hajda@xxxxxxxxxxx, narmstrong@xxxxxxxxxxxx,
Laurent.pinchart@xxxxxxxxxxxxxxxx, jonas@xxxxxxxxx,
jernej.skrabec@xxxxxxxx, kishon@xxxxxx, vkoul@xxxxxxxxxx,
robert.foss@xxxxxxxxxx, lee.jones@xxxxxxxxxx
Subject: [PATCH v5 10/14] drm/bridge: imx: Add LDB driver helper
support
Message-ID: <1615370138-5673-11-git-send-email-victor.liu@xxxxxxx>
Content-Type: text/plain

This patch adds a helper to support LDB drm bridge drivers for
i.MX SoCs. Helper functions supported by this helper should
implement common logics for all LDB modules embedded in i.MX SoCs.

Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
v4->v5:
* Make imx-ldb-helper be a pure object to be linked with i.MX8qxp LDB bridge
driver and i.MX8qm LDB bridge driver. (Robert)
* Move 'imx_ldb_helper.h' to 'drivers/gpu/drm/bridge/imx/imx-ldb-helper.h'.
(Robert)
* s/__FSL_IMX_LDB__/__IMX_LDB_HELPER__/ for 'imx-ldb-helper.h'.

v3->v4:
* No change.

v2->v3:
* Call syscon_node_to_regmap() to get regmap instead of
syscon_regmap_lookup_by_phandle().

v1->v2:
* No change.

drivers/gpu/drm/bridge/imx/imx-ldb-helper.c | 232 ++++++++++++++++++++++++++++
drivers/gpu/drm/bridge/imx/imx-ldb-helper.h | 98 ++++++++++++
2 files changed, 330 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.h

diff --git a/drivers/gpu/drm/bridge/imx/imx-ldb-helper.c b/drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
new file mode 100644
index 00000000..d01c4ff9
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix
+ * Copyright 2019,2020 NXP
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#include "imx-ldb-helper.h"
+
+bool ldb_channel_is_single_link(struct ldb_channel *ldb_ch)
+{
+ return ldb_ch->link_type == LDB_CH_SINGLE_LINK;
+}
+
+bool ldb_channel_is_split_link(struct ldb_channel *ldb_ch)
+{
+ return ldb_ch->link_type == LDB_CH_DUAL_LINK_EVEN_ODD_PIXELS ||
+ ldb_ch->link_type == LDB_CH_DUAL_LINK_ODD_EVEN_PIXELS;
+}
+
+int ldb_bridge_atomic_check_helper(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct ldb_channel *ldb_ch = bridge->driver_private;
+
+ ldb_ch->in_bus_format = bridge_state->input_bus_cfg.format;
+ ldb_ch->out_bus_format = bridge_state->output_bus_cfg.format;
+
+ return 0;
+}
+
+void ldb_bridge_mode_set_helper(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode)
+{
+ struct ldb_channel *ldb_ch = bridge->driver_private;
+ struct ldb *ldb = ldb_ch->ldb;
+ bool is_split = ldb_channel_is_split_link(ldb_ch);
+
+ if (is_split)
+ ldb->ldb_ctrl |= LDB_SPLIT_MODE_EN;
+
+ switch (ldb_ch->out_bus_format) {
+ case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+ break;
+ case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
+ if (ldb_ch->chno == 0 || is_split)
+ ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24;
+ if (ldb_ch->chno == 1 || is_split)
+ ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH1_24;
+ break;
+ case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+ if (ldb_ch->chno == 0 || is_split)
+ ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH0_24 |
+ LDB_BIT_MAP_CH0_JEIDA;
+ if (ldb_ch->chno == 1 || is_split)
+ ldb->ldb_ctrl |= LDB_DATA_WIDTH_CH1_24 |
+ LDB_BIT_MAP_CH1_JEIDA;
+ break;
+ }
+}
+
+void ldb_bridge_enable_helper(struct drm_bridge *bridge)
+{
+ struct ldb_channel *ldb_ch = bridge->driver_private;
+ struct ldb *ldb = ldb_ch->ldb;
+
+ /*
+ * Platform specific bridge drivers should set ldb_ctrl properly
+ * for the enablement, so just write the ctrl_reg here.
+ */
+ regmap_write(ldb->regmap, ldb->ctrl_reg, ldb->ldb_ctrl);
+}
+
+void ldb_bridge_disable_helper(struct drm_bridge *bridge)
+{
+ struct ldb_channel *ldb_ch = bridge->driver_private;
+ struct ldb *ldb = ldb_ch->ldb;
+ bool is_split = ldb_channel_is_split_link(ldb_ch);
+
+ if (ldb_ch->chno == 0 || is_split)
+ ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK;
+ if (ldb_ch->chno == 1 || is_split)
+ ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK;
+
+ regmap_write(ldb->regmap, ldb->ctrl_reg, ldb->ldb_ctrl);
+}
+
+int ldb_bridge_attach_helper(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct ldb_channel *ldb_ch = bridge->driver_private;
+ struct ldb *ldb = ldb_ch->ldb;
+
+ if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
+ DRM_DEV_ERROR(ldb->dev,
+ "do not support creating a drm_connector\n");
+ return -EINVAL;
+ }
+
+ if (!bridge->encoder) {
+ DRM_DEV_ERROR(ldb->dev, "missing encoder\n");
+ return -ENODEV;
+ }
+
+ return drm_bridge_attach(bridge->encoder,
+ ldb_ch->next_bridge, bridge,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+}
+
+int ldb_init_helper(struct ldb *ldb)
+{
+ struct device *dev = ldb->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ int ret;
+ u32 i;
+
+ ldb->regmap = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(ldb->regmap)) {
+ ret = PTR_ERR(ldb->regmap);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev, "failed to get regmap: %d\n", ret);
+ return ret;
+ }
+
+ for_each_available_child_of_node(np, child) {
+ struct ldb_channel *ldb_ch;
+
+ ret = of_property_read_u32(child, "reg", &i);
+ if (ret || i > MAX_LDB_CHAN_NUM - 1) {
+ ret = -EINVAL;
+ DRM_DEV_ERROR(dev,
+ "invalid channel node address: %u\n", i);
+ of_node_put(child);
+ return ret;
+ }
+
+ ldb_ch = ldb->channel[i];
+ ldb_ch->ldb = ldb;
+ ldb_ch->chno = i;
+ ldb_ch->is_available = true;
+ ldb_ch->np = child;
+
+ ldb->available_ch_cnt++;
+ }
+
+ return 0;
+}
+
+int ldb_find_next_bridge_helper(struct ldb *ldb)
+{
+ struct device *dev = ldb->dev;
+ struct ldb_channel *ldb_ch;
+ int ret, i;
+
+ for (i = 0; i < MAX_LDB_CHAN_NUM; i++) {
+ ldb_ch = ldb->channel[i];
+
+ if (!ldb_ch->is_available)
+ continue;
+
+ ret = drm_of_find_panel_or_bridge(ldb_ch->np, 1, 0,
+ &ldb_ch->panel,
+ &ldb_ch->next_bridge);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev,
+ "failed to find panel or bridge: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (ldb_ch->panel) {
+ ldb_ch->next_bridge = devm_drm_panel_bridge_add(dev,
+ ldb_ch->panel);
+ if (IS_ERR(ldb_ch->next_bridge)) {
+ ret = PTR_ERR(ldb_ch->next_bridge);
+ DRM_DEV_ERROR(dev,
+ "failed to add panel bridge: %d\n",
+ ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
+void ldb_add_bridge_helper(struct ldb *ldb,
+ const struct drm_bridge_funcs *bridge_funcs)
+{
+ struct ldb_channel *ldb_ch;
+ int i;
+
+ for (i = 0; i < MAX_LDB_CHAN_NUM; i++) {
+ ldb_ch = ldb->channel[i];
+
+ if (!ldb_ch->is_available)
+ continue;
+
+ ldb_ch->bridge.driver_private = ldb_ch;
+ ldb_ch->bridge.funcs = bridge_funcs;
+ ldb_ch->bridge.of_node = ldb_ch->np;
+
+ drm_bridge_add(&ldb_ch->bridge);
+ }
+}
+
+void ldb_remove_bridge_helper(struct ldb *ldb)
+{
+ struct ldb_channel *ldb_ch;
+ int i;
+
+ for (i = 0; i < MAX_LDB_CHAN_NUM; i++) {
+ ldb_ch = ldb->channel[i];
+
+ if (!ldb_ch->is_available)
+ continue;
+
+ drm_bridge_remove(&ldb_ch->bridge);
+ }
+}
diff --git a/drivers/gpu/drm/bridge/imx/imx-ldb-helper.h b/drivers/gpu/drm/bridge/imx/imx-ldb-helper.h
new file mode 100644
index 00000000..748c378
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx-ldb-helper.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Copyright 2019,2020 NXP
+ */
+
+#ifndef __IMX_LDB_HELPER__
+#define __IMX_LDB_HELPER__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_device.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_panel.h>
+
+#define LDB_CH0_MODE_EN_TO_DI0 (1 << 0)
+#define LDB_CH0_MODE_EN_TO_DI1 (3 << 0)
+#define LDB_CH0_MODE_EN_MASK (3 << 0)
+#define LDB_CH1_MODE_EN_TO_DI0 (1 << 2)
+#define LDB_CH1_MODE_EN_TO_DI1 (3 << 2)
+#define LDB_CH1_MODE_EN_MASK (3 << 2)
+#define LDB_SPLIT_MODE_EN (1 << 4)
+#define LDB_DATA_WIDTH_CH0_24 (1 << 5)
+#define LDB_BIT_MAP_CH0_JEIDA (1 << 6)
+#define LDB_DATA_WIDTH_CH1_24 (1 << 7)
+#define LDB_BIT_MAP_CH1_JEIDA (1 << 8)
+#define LDB_DI0_VS_POL_ACT_LOW (1 << 9)
+#define LDB_DI1_VS_POL_ACT_LOW (1 << 10)
+
+#define MAX_LDB_CHAN_NUM 2
+
+enum ldb_channel_link_type {
+ LDB_CH_SINGLE_LINK,
+ LDB_CH_DUAL_LINK_EVEN_ODD_PIXELS,
+ LDB_CH_DUAL_LINK_ODD_EVEN_PIXELS,
+};
+
+struct ldb;
+
+struct ldb_channel {
+ struct ldb *ldb;
+ struct drm_bridge bridge;
+ struct drm_panel *panel;
+ struct drm_bridge *next_bridge;
+ struct device_node *np;
+ u32 chno;
+ bool is_available;
+ u32 in_bus_format;
+ u32 out_bus_format;
+ enum ldb_channel_link_type link_type;
+};
+
+struct ldb {
+ struct regmap *regmap;
+ struct device *dev;
+ struct ldb_channel *channel[MAX_LDB_CHAN_NUM];
+ unsigned int ctrl_reg;
+ u32 ldb_ctrl;
+ unsigned int available_ch_cnt;
+};
+
+#define bridge_to_ldb_ch(b) container_of(b, struct ldb_channel, bridge)
+
+bool ldb_channel_is_single_link(struct ldb_channel *ldb_ch);
+bool ldb_channel_is_split_link(struct ldb_channel *ldb_ch);
+
+int ldb_bridge_atomic_check_helper(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state);
+
+void ldb_bridge_mode_set_helper(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode);
+
+void ldb_bridge_enable_helper(struct drm_bridge *bridge);
+
+void ldb_bridge_disable_helper(struct drm_bridge *bridge);
+
+int ldb_bridge_attach_helper(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags);
+
+int ldb_init_helper(struct ldb *ldb);
+
+int ldb_find_next_bridge_helper(struct ldb *ldb);
+
+void ldb_add_bridge_helper(struct ldb *ldb,
+ const struct drm_bridge_funcs *bridge_funcs);
+
+void ldb_remove_bridge_helper(struct ldb *ldb);
+
+#endif /* __IMX_LDB_HELPER__ */
--
2.7.4

------------------------------

Message: 2
Date: Wed, 10 Mar 2021 17:55:35 +0800
From: Liu Ying <victor.liu@xxxxxxx>
To: dri-devel@xxxxxxxxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx,
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx,
linux-media@xxxxxxxxxxxxxxx
Cc: airlied@xxxxxxxx, daniel@xxxxxxxx, robh+dt@xxxxxxxxxx,
shawnguo@xxxxxxxxxx, s.hauer@xxxxxxxxxxxxxx, kernel@xxxxxxxxxxxxxx,
festevam@xxxxxxxxx, linux-imx@xxxxxxx, mchehab@xxxxxxxxxx,
a.hajda@xxxxxxxxxxx, narmstrong@xxxxxxxxxxxx,
Laurent.pinchart@xxxxxxxxxxxxxxxx, jonas@xxxxxxxxx,
jernej.skrabec@xxxxxxxx, kishon@xxxxxx, vkoul@xxxxxxxxxx,
robert.foss@xxxxxxxxxx, lee.jones@xxxxxxxxxx
Subject: [PATCH v5 11/14] dt-bindings: display: bridge: Add
i.MX8qm/qxp LVDS display bridge binding
Message-ID: <1615370138-5673-12-git-send-email-victor.liu@xxxxxxx>
Content-Type: text/plain

This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB).

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
v4->v5:
* No change.

v3->v4:
* Add Rob's R-b tag.

v2->v3:
* Drop 'fsl,syscon' property. (Rob)
* Mention the CSR module controls LDB.

v1->v2:
* Use graph schema. (Laurent)
* Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent)

.../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 173 +++++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 00000000..9454300
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+ - Liu Ying <victor.liu@xxxxxxx>
+
+description: |
+ The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+ The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+ The CSR module, as a system controller, contains the LDB's configuration
+ registers.
+
+ For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+ format and can map the input to VESA or JEIDA standards. The two channels
+ cannot be used simultaneously, that is to say, the user should pick one of
+ them to use. Two LDB channels from two LDB instances can work together in
+ LDB split mode to support a dual link LVDS display. The channel indexes
+ have to be different. Channel0 outputs odd pixels and channel1 outputs
+ even pixels.
+
+ For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+ input color format. The two channels can be used simultaneously, either
+ in dual mode or split mode. In dual mode, the two channels output identical
+ data. In split mode, channel0 outputs odd pixels and channel1 outputs even
+ pixels.
+
+ A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+ the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in
+ i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming
+ consistency, this binding calls it LDB.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-ldb
+ - fsl,imx8qxp-ldb
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: pixel clock
+ - description: bypass clock
+
+ clock-names:
+ items:
+ - const: pixel
+ - const: bypass
+
+ power-domains:
+ maxItems: 1
+
+ fsl,companion-ldb:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+ "^channel@[0-1]$":
+ type: object
+ description: Represents a channel of LDB.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ description: The channel index.
+ enum: [ 0, 1 ]
+
+ phys:
+ description: A phandle to the phy module representing the LVDS PHY.
+ maxItems: 1
+
+ phy-names:
+ const: lvds_phy
+
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port of the channel.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output port of the channel.
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+ - phys
+ - phy-names
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - clocks
+ - clock-names
+ - power-domains
+ - channel@0
+ - channel@1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qm-ldb
+ then:
+ properties:
+ fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8qxp-ldb";
+ clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+ <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+ clock-names = "pixel", "bypass";
+ power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+ };
+ };
+ };
+
+ channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+ };
+ };
+ };
+ };
--
2.7.4

------------------------------

Subject: Digest Footer

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

------------------------------

End of dri-devel Digest, Vol 132, Issue 196
*******************************************