On Fri, Feb 12, 2021 at 10:53:35AM +0100, Daniel Mack wrote:
> This adds documentation for a new ILI9163 based, SPI connected display.
>
> Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
> ---
> .../bindings/display/ilitek,ili9163.txt | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt
Bindings are in schema format now.
>
> diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9163.txt b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt
> new file mode 100644
> index 0000000000000..fee119991c14e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt
> @@ -0,0 +1,27 @@
> +Ilitek ILI9163 display panels
> +
> +This binding is for display panels using an Ilitek ILI9163 controller in SPI
> +mode.
> +
> +Required properties:
> +- compatible: "newhaven,1.8-128160EF", "ilitek,ili9163"
> +- dc-gpios: D/C pin
> +- reset-gpios: Reset pin
> +
> +The node for this driver must be a child node of a SPI controller, hence
> +all mandatory properties described in ../spi/spi-bus.txt must be specified.
> +
> +Optional properties:
> +- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> + display@0{
> + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"
> + reg = <0>;
> + spi-max-frequency = <32000000>;
> + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> + rotation = <270>;
> + backlight = <&backlight>;
> + };
> --
> 2.29.2
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
