Hi Jagan, On Wed, Mar 03, 2021 at 08:08:35PM +0530, Jagan Teki wrote: > On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart wrote: > > On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote: > > > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote: > > > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote: > > > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone. > > > > > > > > > > It has a flexible configuration of MIPI DSI signal input and > > > > > produce RGB565, RGB666, RGB888 output format. > > > > > > > > > > Add dt-bingings for it. > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > > > > > --- > > > > > Changes for v3: > > > > > - updated to new dt-bindings style > > > > > > > > > > .../display/bridge/chipone,icn6211.yaml | 90 +++++++++++++++++++ > > > > > 1 file changed, 90 insertions(+) > > > > > create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml > > > > > new file mode 100644 > > > > > index 000000000000..13764f13fe46 > > > > > --- /dev/null > > > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml > > > > > @@ -0,0 +1,90 @@ > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > > +%YAML 1.2 > > > > > +--- > > > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > + > > > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge > > > > > + > > > > > +maintainers: > > > > > + - Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > > > > > + > > > > > +description: | > > > > > + ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone. > > > > > + > > > > > + It has a flexible configuration of MIPI DSI signal input and > > > > > + produce RGB565, RGB666, RGB888 output format. > > > > > > > > How does one select between the output formats ? Should the output > > > > connection option be described in the device tree ? > > > > > > I think that is a good option to select output formats via dts. what > > > if it makes it a generic property like data-lanes? since it is common > > > across many other bridges. > > > > Describing the output connection in the device tree sounds like a good > > idea indeed. The bus-width property could be used for this, maybe along > > the lines of > > https://lore.kernel.org/dri-devel/20201013020619.GG3942@xxxxxxxxxxxxxxxxxxxxxxxxxx/. > > I have seen an issue by passing bus-width where the same bus-with 24 > can use by RGB888 and RGB666 according to > mipi_dsi_pixel_format_to_bpp. Having a default RGB888 format now and > update it when it supports properly, can be a good Idea I thought of. > Let me know if you have any comments? I'm fine with hardcoding a default for now. If a given bus wiring (which is described in DT by bus-width) can transport different formats, that's something that should be configured dynamically, either by querying what format a sink (such as a panel) requires, or if both the source and the sink can support different formats, possibly by involving userspace in the selection. -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
