On 2021-02-24 16:56, Daniel Thompson wrote:
On Wed, Feb 24, 2021 at 09:20:48AM +0530, Kiran Gunda wrote:
Currently the FSC SYNC_BIT and MOD_SYNC_BIT are toggled
from 1 to 0 to update the FSC and brightenss settings.
Change this sequence form 0 to 1 as per the hardware team
recommendation to update the FSC and brightness correctly.
Again... this patch description feels somewhat rushed. A patch
description is there to support code reviewer and to go on the version
history to assist with future maintainance. They matter!
Anyhow I don't recognise the "from 1 to 0" in the code since both
before
an after the change it goes "from 0 to 1" and "from 1 to 0" but in a
different order. Doesn't the code actually currently implement "set
then
clear"? If so then, likewise the new code is adopting "clear then set".
I would have used "set" and "clear" instead of "0" and "1".
Yes. The current code implementation is "set" all SYN bits and then
"clear"
all SYNC bits. The new code is modified to change the sequence from
"clear"
first and then "set" to ensure both FSC and brightness are updated.
As with patch 1, the sync bits modified by wled3_sync_toggle singular
or plural?
It is plural. We have to "clear" and "set" all sync bits.
Finally a description that is more sympathetic to the reviewer would be
welcome. For example the following (if my guess is right and it is
true) makes things much easier for the reviewer:
Sure. I will update the documentation and patch description clearly.
"The sync takes place during a 0 to 1 transition of the sync
bits so the hardware team recommends a clear-then-set approach in
order to guarantee such a transition regardless of the previous
register state".
Daniel.
Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
---
drivers/video/backlight/qcom-wled.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c
b/drivers/video/backlight/qcom-wled.c
index aef52b9..19f83ac 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -337,13 +337,13 @@ static int wled3_sync_toggle(struct wled *wled)
rc = regmap_update_bits(wled->regmap,
wled->ctrl_addr + WLED3_SINK_REG_SYNC,
- mask, mask);
+ mask, WLED3_SINK_REG_SYNC_CLEAR);
if (rc < 0)
return rc;
rc = regmap_update_bits(wled->regmap,
wled->ctrl_addr + WLED3_SINK_REG_SYNC,
- mask, WLED3_SINK_REG_SYNC_CLEAR);
+ mask, mask);
return rc;
}
@@ -353,17 +353,17 @@ static int wled5_mod_sync_toggle(struct wled
*wled)
int rc;
u8 val;
- val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
- WLED5_SINK_REG_SYNC_MOD_B_BIT;
rc = regmap_update_bits(wled->regmap,
wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
- WLED5_SINK_REG_SYNC_MASK, val);
+ WLED5_SINK_REG_SYNC_MASK, 0);
if (rc < 0)
return rc;
+ val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+ WLED5_SINK_REG_SYNC_MOD_B_BIT;
return regmap_update_bits(wled->regmap,
wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
- WLED5_SINK_REG_SYNC_MASK, 0);
+ WLED5_SINK_REG_SYNC_MASK, val);
}
static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
