Re: [Linaro-mm-sig] [PATCH 1/2] dma-buf: Require VM_PFNMAP vma for mmap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 25, 2021 at 11:44 AM Daniel Vetter <daniel@xxxxxxxx> wrote:
>
> On Thu, Feb 25, 2021 at 11:28:31AM +0100, Christian König wrote:
> > Am 24.02.21 um 10:31 schrieb Daniel Vetter:
> > > On Wed, Feb 24, 2021 at 10:16 AM Thomas Hellström (Intel)
> > > <thomas_os@xxxxxxxxxxxx> wrote:
> > > >
> > > > On 2/24/21 9:45 AM, Daniel Vetter wrote:
> > > > > On Wed, Feb 24, 2021 at 8:46 AM Thomas Hellström (Intel)
> > > > > <thomas_os@xxxxxxxxxxxx> wrote:
> > > > > > On 2/23/21 11:59 AM, Daniel Vetter wrote:
> > > > > > > tldr; DMA buffers aren't normal memory, expecting that you can use
> > > > > > > them like that (like calling get_user_pages works, or that they're
> > > > > > > accounting like any other normal memory) cannot be guaranteed.
> > > > > > >
> > > > > > > Since some userspace only runs on integrated devices, where all
> > > > > > > buffers are actually all resident system memory, there's a huge
> > > > > > > temptation to assume that a struct page is always present and useable
> > > > > > > like for any more pagecache backed mmap. This has the potential to
> > > > > > > result in a uapi nightmare.
> > > > > > >
> > > > > > > To stop this gap require that DMA buffer mmaps are VM_PFNMAP, which
> > > > > > > blocks get_user_pages and all the other struct page based
> > > > > > > infrastructure for everyone. In spirit this is the uapi counterpart to
> > > > > > > the kernel-internal CONFIG_DMABUF_DEBUG.
> > > > > > >
> > > > > > > Motivated by a recent patch which wanted to swich the system dma-buf
> > > > > > > heap to vm_insert_page instead of vm_insert_pfn.
> > > > > > >
> > > > > > > v2:
> > > > > > >
> > > > > > > Jason brought up that we also want to guarantee that all ptes have the
> > > > > > > pte_special flag set, to catch fast get_user_pages (on architectures
> > > > > > > that support this). Allowing VM_MIXEDMAP (like VM_SPECIAL does) would
> > > > > > > still allow vm_insert_page, but limiting to VM_PFNMAP will catch that.
> > > > > > >
> > > > > > >    From auditing the various functions to insert pfn pte entires
> > > > > > > (vm_insert_pfn_prot, remap_pfn_range and all it's callers like
> > > > > > > dma_mmap_wc) it looks like VM_PFNMAP is already required anyway, so
> > > > > > > this should be the correct flag to check for.
> > > > > > >
> > > > > > If we require VM_PFNMAP, for ordinary page mappings, we also need to
> > > > > > disallow COW mappings, since it will not work on architectures that
> > > > > > don't have CONFIG_ARCH_HAS_PTE_SPECIAL, (see the docs for vm_normal_page()).
> > > > > Hm I figured everyone just uses MAP_SHARED for buffer objects since
> > > > > COW really makes absolutely no sense. How would we enforce this?
> > > > Perhaps returning -EINVAL on is_cow_mapping() at mmap time. Either that
> > > > or allowing MIXEDMAP.
> > > >
> > > > > > Also worth noting is the comment in  ttm_bo_mmap_vma_setup() with
> > > > > > possible performance implications with x86 + PAT + VM_PFNMAP + normal
> > > > > > pages. That's a very old comment, though, and might not be valid anymore.
> > > > > I think that's why ttm has a page cache for these, because it indeed
> > > > > sucks. The PAT changes on pages are rather expensive.
> > > > IIRC the page cache was implemented because of the slowness of the
> > > > caching mode transition itself, more specifically the wbinvd() call +
> > > > global TLB flush.
> >
> > Yes, exactly that. The global TLB flush is what really breaks our neck here
> > from a performance perspective.
> >
> > > > > There is still an issue for iomem mappings, because the PAT validation
> > > > > does a linear walk of the resource tree (lol) for every vm_insert_pfn.
> > > > > But for i915 at least this is fixed by using the io_mapping
> > > > > infrastructure, which does the PAT reservation only once when you set
> > > > > up the mapping area at driver load.
> > > > Yes, I guess that was the issue that the comment describes, but the
> > > > issue wasn't there with vm_insert_mixed() + VM_MIXEDMAP.
> > > >
> > > > > Also TTM uses VM_PFNMAP right now for everything, so it can't be a
> > > > > problem that hurts much :-)
> > > > Hmm, both 5.11 and drm-tip appears to still use MIXEDMAP?
> > > >
> > > > https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/ttm/ttm_bo_vm.c#L554
> > > Uh that's bad, because mixed maps pointing at struct page wont stop
> > > gup. At least afaik.
> >
> > Hui? I'm pretty sure MIXEDMAP stops gup as well. Otherwise we would have
> > already seen tons of problems with the page cache.
>
> On any architecture which has CONFIG_ARCH_HAS_PTE_SPECIAL vm_insert_mixed
> boils down to vm_insert_pfn wrt gup. And special pte stops gup fast path.
>
> But if you don't have VM_IO or VM_PFNMAP set, then I'm not seeing how
> you're stopping gup slow path. See check_vma_flags() in mm/gup.c.
>
> Also if you don't have CONFIG_ARCH_HAS_PTE_SPECIAL then I don't think
> vm_insert_mixed even works on iomem pfns. There's the devmap exception,
> but we're not devmap. Worse ttm abuses some accidental codepath to smuggle
> in hugepte support by intentionally not being devmap.
>
> So I'm really not sure this works as we think it should. Maybe good to do
> a quick test program on amdgpu with a buffer in system memory only and try
> to do direct io into it. If it works, you have a problem, and a bad one.

That's probably impossible, since a quick git grep shows that pretty
much anything reasonable has special ptes: arc, arm, arm64, powerpc,
riscv, s390, sh, sparc, x86. I don't think you'll have a platform
where you can plug an amdgpu in and actually exercise the bug :-)

So maybe we should just switch over to VM_PFNMAP for ttm for more clarity?
-Daniel


>
> >
> > Regards,
> > Christian.
> >
> > > Christian, do we need to patch this up, and maybe fix up ttm fault
> > > handler to use io_mapping so the vm_insert_pfn stuff is fast?
> > > -Daniel
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch



-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux