Hi Nicolas,
W dniu 22.02.2021 o 06:31, Nicolas Boichat pisze:
> On Mon, Feb 22, 2021 at 3:08 AM Laurent Pinchart
> <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>> Hi Nicolas,
>>
>> Thank you for the patch.
>>
>> On Thu, Feb 11, 2021 at 11:33:55AM +0800, Nicolas Boichat wrote:
>>> Many of the DSI flags have names opposite to their actual effects,
>>> e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually
>>> be disabled. Fix this by including _NO_ in the flag names, e.g.
>>> MIPI_DSI_MODE_NO_EOT_PACKET.
>>>
>>> Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
>> This looks good to me, it increases readability.
>>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>>
>> Please however see the end of the mail for a comment.
Reviewed-by: Andrzej Hajda <andrzej.hajda@xxxxxxxxxxx>
And comment at the end.
>>
>>> ---
>>> I considered adding _DISABLE_ instead, but that'd make the
>>> flag names a big too long.
>>>
>>> Generated with:
>>> flag=MIPI_DSI_MODE_VIDEO_HFP; git grep $flag | cut -f1 -d':' | \
>>> xargs -I{} sed -i -e "s/$flag/MIPI_DSI_MODE_VIDEO_NO_HFP/" {}
>>> flag=MIPI_DSI_MODE_VIDEO_HBP; git grep $flag | cut -f1 -d':' | \
>>> xargs -I{} sed -i -e "s/$flag/MIPI_DSI_MODE_VIDEO_NO_HBP/" {}
>>> flag=MIPI_DSI_MODE_VIDEO_HSA; git grep $flag | cut -f1 -d':' | \
>>> xargs -I{} sed -i -e "s/$flag/MIPI_DSI_MODE_VIDEO_NO_HSA/" {}
>>> flag=MIPI_DSI_MODE_EOT_PACKET; git grep $flag | cut -f1 -d':' | \
>>> xargs -I{} sed -i -e "s/$flag/MIPI_DSI_MODE_NO_EOT_PACKET/" {}
>>> (then minor format changes)
>> Ever tried coccinelle ? :-)
> Fun project for next time ,-)
>
>>> drivers/gpu/drm/bridge/adv7511/adv7533.c | 2 +-
>>> drivers/gpu/drm/bridge/analogix/anx7625.c | 2 +-
>>> drivers/gpu/drm/bridge/cdns-dsi.c | 4 ++--
>>> drivers/gpu/drm/bridge/tc358768.c | 2 +-
>>> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 8 ++++----
>>> drivers/gpu/drm/mcde/mcde_dsi.c | 2 +-
>>> drivers/gpu/drm/mediatek/mtk_dsi.c | 2 +-
>>> drivers/gpu/drm/msm/dsi/dsi_host.c | 8 ++++----
>>> drivers/gpu/drm/panel/panel-asus-z00t-tm5p5-n35596.c | 2 +-
>>> drivers/gpu/drm/panel/panel-dsi-cm.c | 2 +-
>>> drivers/gpu/drm/panel/panel-elida-kd35t133.c | 2 +-
>>> drivers/gpu/drm/panel/panel-khadas-ts050.c | 2 +-
>>> drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 2 +-
>>> drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c | 2 +-
>>> drivers/gpu/drm/panel/panel-novatek-nt35510.c | 2 +-
>>> drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c | 2 +-
>>> drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 2 +-
>>> drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 2 +-
>>> drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c | 2 +-
>>> drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 4 ++--
>>> drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 2 +-
>>> drivers/gpu/drm/panel/panel-simple.c | 2 +-
>>> drivers/gpu/drm/panel/panel-sony-acx424akp.c | 2 +-
>>> drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c | 2 +-
>>> include/drm/drm_mipi_dsi.h | 8 ++++----
>>> 25 files changed, 36 insertions(+), 36 deletions(-)
>>>
>>> []
>>> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
>>> index 360e6377e84b..ba91cf22af51 100644
>>> --- a/include/drm/drm_mipi_dsi.h
>>> +++ b/include/drm/drm_mipi_dsi.h
>>> @@ -119,15 +119,15 @@ struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node);
>>> /* enable hsync-end packets in vsync-pulse and v-porch area */
>>> #define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
>> We're mixing bits that enable a feature and bits that disable a feature.
>> Are these bits defined in the DSI spec, or internal to DRM ? In the
>> latter case, would it make sense to standardize on one "polarity" ? That
>> would be a more intrusive change in drivers though.
> Yes, that'd require auditing every single code path and reverse the
> logic as needed. I'm not volunteering for that ,-P (hopefully the
> current change is still an improvement).
>
> Hopefully real DSI experts can comment (Andrzej?), I think the default
> are sensible settings?
Hehe, "real DSI expert" :), ok I've read spec few times :)
If I remember correctly the spec did not prioritizes these modes, specs
are publicly available if somebody want to check it feel free.
These values were taken from defaults for Exynos DSI, as nobody at the
time has better idea.
We could try to optimize it by looking for example in different dsi
hosts defaults, or maybe dsi devices, but I am not sure if it is worth time.
This solution is good for me.
Regards
Andrzej
>
>
>>> /* disable hfront-porch area */
>>> -#define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
>>> +#define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5)
>>> /* disable hback-porch area */
>>> -#define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
>>> +#define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6)
>>> /* disable hsync-active area */
>>> -#define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
>>> +#define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7)
>>> /* flush display FIFO on vsync pulse */
>>> #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
>>> /* disable EoT packets in HS mode */
>>> -#define MIPI_DSI_MODE_EOT_PACKET BIT(9)
>>> +#define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9)
>>> /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
>>> #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
>>> /* transmit data in low power */
>> --
>> Regards,
>>
>> Laurent Pinchart
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://protect2.fireeye.com/v1/url?k=e6f0d6d2-b96befef-e6f15d9d-0cc47a31309a-f4be6a0935319c2d&q=1&e=5e175166-1972-4f28-a483-e9a65c07e25f&u=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Fdri-devel
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
