Re: [PATCH v2 2/2] drm/msm/dp: add supported max link rate specified from dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 18 Feb 14:55 CST 2021, Kuogee Hsieh wrote:

> Allow supported link rate to be limited to the value specified at
> dtsi. If it is not specified, then link rate is derived from dpcd
> directly. Below are examples,
> link-rate = <162000> for max link rate limited at 1.62G
> link-rate = <270000> for max link rate limited at 2.7G
> link-rate = <540000> for max link rate limited at 5.4G
> link-rate = <810000> for max link rate limited at 8.1G
> 
> Changes in V2:
> -- allow supported max link rate specified from dtsi
> 
> Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c |  1 +
>  drivers/gpu/drm/msm/dp/dp_panel.c   |  7 ++++---
>  drivers/gpu/drm/msm/dp/dp_panel.h   |  1 +
>  drivers/gpu/drm/msm/dp/dp_parser.c  | 13 +++++++++++++
>  drivers/gpu/drm/msm/dp/dp_parser.h  |  1 +
>  5 files changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 5a39da6..f633ba6 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -322,6 +322,7 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp)
>  	struct edid *edid;
>  
>  	dp->panel->max_dp_lanes = dp->parser->max_dp_lanes;
> +	dp->panel->max_link_rate = dp->parser->max_link_rate;
>  
>  	rc = dp_panel_read_sink_caps(dp->panel, dp->dp_display.connector);
>  	if (rc)
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index 9cc8166..be7f102 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -76,9 +76,10 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
>  	if (link_info->num_lanes > dp_panel->max_dp_lanes)
>  		link_info->num_lanes = dp_panel->max_dp_lanes;
>  
> -	/* Limit support upto HBR2 until HBR3 support is added */
> -	if (link_info->rate >= (drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4)))
> -		link_info->rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_5_4);
> +	/* Limit support of ink rate if specified */
> +	if (dp_panel->max_link_rate &&

Make the parser always initialize max_link_rate to something reasonable
and just compare against that here.

> +			(link_info->rate > dp_panel->max_link_rate))

No need for the (), nor for line breaking this.

> +		link_info->rate = dp_panel->max_link_rate;
>  
>  	DRM_DEBUG_DP("version: %d.%d\n", major, minor);
>  	DRM_DEBUG_DP("link_rate=%d\n", link_info->rate);
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
> index 9023e5b..1876f5e 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.h
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.h
> @@ -51,6 +51,7 @@ struct dp_panel {
>  	u32 vic;
>  	u32 max_pclk_khz;
>  	u32 max_dp_lanes;
> +	u32 max_link_rate;
>  
>  	u32 max_bw_code;
>  };
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
> index 0519dd3..d8b6898 100644
> --- a/drivers/gpu/drm/msm/dp/dp_parser.c
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> @@ -87,6 +87,8 @@ static int dp_parser_misc(struct dp_parser *parser)
>  	struct device_node *of_node = parser->pdev->dev.of_node;
>  	int len = 0;
>  	const char *data_lane_property = "data-lanes";
> +	const char *link_rate_property = "link-rate";

There's no reason for stashing these in local variables.

> +	u32 rate = 0;
>  
>  	len = of_property_count_elems_of_size(of_node,
>  			 data_lane_property, sizeof(u32));
> @@ -97,6 +99,17 @@ static int dp_parser_misc(struct dp_parser *parser)
>  	}
>  
>  	parser->max_dp_lanes = len;
> +
> +	len = of_property_count_elems_of_size(of_node,
> +			 link_rate_property, sizeof(u32));

I'm afraid I don't see the reason for this, simply rely on the return
value of of_property_read_u32(), i.e.

	ret = of_property_read_u32(node, "link-rate", &rate);
	if (!ret)
		parser->max_link_rate = rate;

Or if you want to give it some default value:

	rate = 1234;
	of_property_read_u32(node, "link-rate", &rate);
	
Which either will overwrite the rate with the value of the property, or
leave it untouched.

Regards,
Bjorn

> +
> +	if (len == 1) {
> +		of_property_read_u32_index(of_node,
> +				link_rate_property, 0, &rate);
> +
> +		parser->max_link_rate = rate;
> +	}
> +
>  	return 0;
>  }
>  
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.h b/drivers/gpu/drm/msm/dp/dp_parser.h
> index 34b4962..7046fce 100644
> --- a/drivers/gpu/drm/msm/dp/dp_parser.h
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.h
> @@ -116,6 +116,7 @@ struct dp_parser {
>  	struct dp_display_data disp_data;
>  	const struct dp_regulator_cfg *regulator_cfg;
>  	u32 max_dp_lanes;
> +	u32 max_link_rate;
>  
>  	int (*parse)(struct dp_parser *parser);
>  };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux