On Wed, 10 Feb 2021 10:10:37 +0100, Frieder Schrempf wrote: > On 04.02.21 18:46, Daniel Vetter wrote: > > On Thu, Feb 4, 2021 at 6:26 PM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > > On Thu, Feb 04, 2021 at 06:19:22PM +0100, Daniel Vetter wrote: > > > > On Thu, Feb 4, 2021 at 5:28 PM Andrzej Hajda wrote: > > > > > W dniu 04.02.2021 o 17:05, Daniel Vetter pisze: > > > > > > On Thu, Feb 04, 2021 at 11:56:32AM +0100, Michael Tretter wrote: > > > > > > > On Thu, 04 Feb 2021 11:17:49 +0100, Daniel Vetter wrote: > > > > > > > > On Wed, Feb 3, 2021 at 9:32 PM Michael Tretter wrote: > > > > > > > > > On Mon, 01 Feb 2021 17:33:14 +0100, Michael Tretter wrote: > > > > > > > > > > On Tue, 15 Sep 2020 21:40:40 +0200, Andrzej Hajda wrote: > > > > > > > > > > > W dniu 14.09.2020 o 23:19, Andrzej Hajda pisze: > > > > > > > > > > > > On 14.09.2020 22:01, Michael Tretter wrote: > > > > > > > > > > > > > On Mon, 14 Sep 2020 14:31:19 +0200, Marek Szyprowski wrote: > > > > > > > > > > > > > > On 14.09.2020 10:29, Marek Szyprowski wrote: > > > > > > > > > > > > > > > On 11.09.2020 15:54, Michael Tretter wrote: > > > > > > > > > > > > > > > > Make the exynos_dsi driver a full drm bridge that can be found and > > > > > > > > > > > > > > > > used > > > > > > > > > > > > > > > > from other drivers. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Other drivers can only attach to the bridge, if a mipi dsi device > > > > > > > > > > > > > > > > already attached to the bridge. This allows to defer the probe of the > > > > > > > > > > > > > > > > display pipe until the downstream bridges are available, too. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> > > > > > > > > > > > > > > > This one (and the whole series applied) still fails on Exynos boards: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping > > > > > > > > > > > > > > > operations > > > > > > > > > > > > > > > exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) > > > > > > > > > > > > > > > OF: graph: no port node found in /soc/dsi@11c80000 > > > > > > > > > > > > > > > 8<--- cut here --- > > > > > > > > > > > > > > > Unable to handle kernel NULL pointer dereference at virtual address > > > > > > > > > > > > > > > 00000084 > > > > > > > > > > > > > > > pgd = (ptrval) > > > > > > > > > > > > > > > [00000084] *pgd=00000000 > > > > > > > > > > > > > > > Internal error: Oops: 5 [#1] PREEMPT SMP ARM > > > > > > > > > > > > > > > Modules linked in: > > > > > > > > > > > > > > > CPU: 1 PID: 1 Comm: swapper/0 Not tainted > > > > > > > > > > > > > > > 5.9.0-rc4-next-20200911-00010-g417dc70d70ec #1608 > > > > > > > > > > > > > > > Hardware name: Samsung Exynos (Flattened Device Tree) > > > > > > > > > > > > > > > PC is at drm_bridge_attach+0x18/0x164 > > > > > > > > > > > > > > > LR is at exynos_dsi_bind+0x88/0xa8 > > > > > > > > > > > > > > > pc : [<c0628c08>] lr : [<c064d560>] psr: 20000013 > > > > > > > > > > > > > > > sp : ef0dfca8 ip : 00000002 fp : c13190e0 > > > > > > > > > > > > > > > r10: 00000000 r9 : ee46d580 r8 : c13190e0 > > > > > > > > > > > > > > > r7 : ee438800 r6 : 00000018 r5 : ef253810 r4 : ef39e840 > > > > > > > > > > > > > > > r3 : 00000000 r2 : 00000018 r1 : ef39e888 r0 : ef39e840 > > > > > > > > > > > > > > > Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none > > > > > > > > > > > > > > > Control: 10c5387d Table: 4000404a DAC: 00000051 > > > > > > > > > > > > > > > Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) > > > > > > > > > > > > > > > Stack: (0xef0dfca8 to 0xef0e0000) > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > [<c0628c08>] (drm_bridge_attach) from [<c064d560>] > > > > > > > > > > > > > > > (exynos_dsi_bind+0x88/0xa8) > > > > > > > > > > > > > > > [<c064d560>] (exynos_dsi_bind) from [<c066a800>] > > > > > > > > > > > > > > > (component_bind_all+0xfc/0x290) > > > > > > > > > > > > > > > [<c066a800>] (component_bind_all) from [<c0649dc0>] > > > > > > > > > > > > > > > (exynos_drm_bind+0xe4/0x19c) > > > > > > > > > > > > > > > [<c0649dc0>] (exynos_drm_bind) from [<c066ad74>] > > > > > > > > > > > > > > > (try_to_bring_up_master+0x1e4/0x2c4) > > > > > > > > > > > > > > > [<c066ad74>] (try_to_bring_up_master) from [<c066b2b4>] > > > > > > > > > > > > > > > (component_master_add_with_match+0xd4/0x108) > > > > > > > > > > > > > > > [<c066b2b4>] (component_master_add_with_match) from [<c0649ae8>] > > > > > > > > > > > > > > > (exynos_drm_platform_probe+0xe4/0x110) > > > > > > > > > > > > > > > [<c0649ae8>] (exynos_drm_platform_probe) from [<c0674e6c>] > > > > > > > > > > > > > > > (platform_drv_probe+0x6c/0xa4) > > > > > > > > > > > > > > > [<c0674e6c>] (platform_drv_probe) from [<c067242c>] > > > > > > > > > > > > > > > (really_probe+0x200/0x4fc) > > > > > > > > > > > > > > > [<c067242c>] (really_probe) from [<c06728f0>] > > > > > > > > > > > > > > > (driver_probe_device+0x78/0x1fc) > > > > > > > > > > > > > > > [<c06728f0>] (driver_probe_device) from [<c0672cd8>] > > > > > > > > > > > > > > > (device_driver_attach+0x58/0x60) > > > > > > > > > > > > > > > [<c0672cd8>] (device_driver_attach) from [<c0672dbc>] > > > > > > > > > > > > > > > (__driver_attach+0xdc/0x174) > > > > > > > > > > > > > > > [<c0672dbc>] (__driver_attach) from [<c06701b4>] > > > > > > > > > > > > > > > (bus_for_each_dev+0x68/0xb4) > > > > > > > > > > > > > > > [<c06701b4>] (bus_for_each_dev) from [<c06714e8>] > > > > > > > > > > > > > > > (bus_add_driver+0x158/0x214) > > > > > > > > > > > > > > > [<c06714e8>] (bus_add_driver) from [<c0673c1c>] > > > > > > > > > > > > > > > (driver_register+0x78/0x110) > > > > > > > > > > > > > > > [<c0673c1c>] (driver_register) from [<c0649ca8>] > > > > > > > > > > > > > > > (exynos_drm_init+0xe4/0x118) > > > > > > > > > > > > > > > [<c0649ca8>] (exynos_drm_init) from [<c0102484>] > > > > > > > > > > > > > > > (do_one_initcall+0x8c/0x42c) > > > > > > > > > > > > > > > [<c0102484>] (do_one_initcall) from [<c11011c0>] > > > > > > > > > > > > > > > (kernel_init_freeable+0x190/0x1dc) > > > > > > > > > > > > > > > [<c11011c0>] (kernel_init_freeable) from [<c0af7880>] > > > > > > > > > > > > > > > (kernel_init+0x8/0x118) > > > > > > > > > > > > > > > [<c0af7880>] (kernel_init) from [<c0100114>] (ret_from_fork+0x14/0x20) > > > > > > > > > > > > > > > Exception stack(0xef0dffb0 to 0xef0dfff8) > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > ---[ end trace ee27f313f9ed9da1 ]--- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > # arm-linux-gnueabi-addr2line -e vmlinux c0628c08 > > > > > > > > > > > > > > > drivers/gpu/drm/drm_bridge.c:184 (discriminator 1) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I will try to debug it a bit more today. > > > > > > > > > > > > > > The above crash has been caused by lack of in_bridge initialization to > > > > > > > > > > > > > > NULL in exynos_dsi_bind() in this patch. However, fixing it reveals > > > > > > > > > > > > > > another issue: > > > > > > > > > > > > > > > > > > > > > > > > > > > > [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations > > > > > > > > > > > > > > exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) > > > > > > > > > > > > > > OF: graph: no port node found in /soc/dsi@11c80000 > > > > > > > > > > > > > > 8<--- cut here --- > > > > > > > > > > > > > > Unable to handle kernel NULL pointer dereference at virtual address > > > > > > > > > > > > > > 00000280 > > > > > > > > > > > > > > pgd = (ptrval) > > > > > > > > > > > > > > [00000280] *pgd=00000000 > > > > > > > > > > > > > > Internal error: Oops: 5 [#1] PREEMPT SMP ARM > > > > > > > > > > > > > > Modules linked in: > > > > > > > > > > > > > > CPU: 0 PID: 1 Comm: swapper/0 Not tainted > > > > > > > > > > > > > > 5.9.0-rc4-next-20200911-00010-g417dc70d70ec-dirty #1613 > > > > > > > > > > > > > > Hardware name: Samsung Exynos (Flattened Device Tree) > > > > > > > > > > > > > > PC is at __mutex_lock+0x54/0xb18 > > > > > > > > > > > > > > LR is at lock_is_held_type+0x80/0x138 > > > > > > > > > > > > > > pc : [<c0afc920>] lr : [<c0af63e8>] psr: 60000013 > > > > > > > > > > > > > > sp : ef0dfd30 ip : 33937b74 fp : c13193c8 > > > > > > > > > > > > > > r10: c1208eec r9 : 00000000 r8 : ee45f808 > > > > > > > > > > > > > > r7 : c19561a4 r6 : 00000000 r5 : 00000000 r4 : 0000024c > > > > > > > > > > > > > > r3 : 00000000 r2 : 00204140 r1 : c124f13c r0 : 00000000 > > > > > > > > > > > > > > Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none > > > > > > > > > > > > > > Control: 10c5387d Table: 4000404a DAC: 00000051 > > > > > > > > > > > > > > Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) > > > > > > > > > > > > > > Stack: (0xef0dfd30 to 0xef0e0000) > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > [<c0afc920>] (__mutex_lock) from [<c0afd400>] > > > > > > > > > > > > > > (mutex_lock_nested+0x1c/0x24) > > > > > > > > > > > > > > [<c0afd400>] (mutex_lock_nested) from [<c064d4b8>] > > > > > > > > > > > > > > (__exynos_dsi_host_attach+0x20/0x6c) > > > > > > > > > > > > > > [<c064d4b8>] (__exynos_dsi_host_attach) from [<c064d914>] > > > > > > > > > > > > > > (exynos_dsi_host_attach+0x70/0x194) > > > > > > > > > > > > > > [<c064d914>] (exynos_dsi_host_attach) from [<c0656b64>] > > > > > > > > > > > > > > (s6e8aa0_probe+0x1b0/0x218) > > > > > > > > > > > > > > [<c0656b64>] (s6e8aa0_probe) from [<c0672530>] > > > > > > > > > > > > > > (really_probe+0x200/0x4fc) > > > > > > > > > > > > > > [<c0672530>] (really_probe) from [<c06729f4>] > > > > > > > > > > > > > > (driver_probe_device+0x78/0x1fc) > > > > > > > > > > > > > > [<c06729f4>] (driver_probe_device) from [<c0672ddc>] > > > > > > > > > > > > > > (device_driver_attach+0x58/0x60) > > > > > > > > > > > > > > [<c0672ddc>] (device_driver_attach) from [<c0672ec0>] > > > > > > > > > > > > > > (__driver_attach+0xdc/0x174) > > > > > > > > > > > > > > [<c0672ec0>] (__driver_attach) from [<c06702b8>] > > > > > > > > > > > > > > (bus_for_each_dev+0x68/0xb4) > > > > > > > > > > > > > > [<c06702b8>] (bus_for_each_dev) from [<c06715ec>] > > > > > > > > > > > > > > (bus_add_driver+0x158/0x214) > > > > > > > > > > > > > > [<c06715ec>] (bus_add_driver) from [<c0673d20>] > > > > > > > > > > > > > > (driver_register+0x78/0x110) > > > > > > > > > > > > > > [<c0673d20>] (driver_register) from [<c0102484>] > > > > > > > > > > > > > > (do_one_initcall+0x8c/0x42c) > > > > > > > > > > > > > > [<c0102484>] (do_one_initcall) from [<c11011c0>] > > > > > > > > > > > > > > (kernel_init_freeable+0x190/0x1dc) > > > > > > > > > > > > > > [<c11011c0>] (kernel_init_freeable) from [<c0af7988>] > > > > > > > > > > > > > > (kernel_init+0x8/0x118) > > > > > > > > > > > > > > [<c0af7988>] (kernel_init) from [<c0100114>] (ret_from_fork+0x14/0x20) > > > > > > > > > > > > > > Exception stack(0xef0dffb0 to 0xef0dfff8) > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > ---[ end trace c06e996ec2e8234d ]--- > > > > > > > > > > > > > > > > > > > > > > > > > > > > This means that dsi->encoder.dev is not initialized in > > > > > > > > > > > > > > __exynos_dsi_host_attach(). > > > > > > > > > > > > > > > > > > > > > > > > > > > > This happens, because drm_bridge_attach() in exynos_dsi_bind() returned > > > > > > > > > > > > > > earlier -517 (deferred probe), what causes cleanup of encoder and > > > > > > > > > > > > > > release of all drm resources. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Then however, the panel tries to register itself and > > > > > > > > > > > > > > exynos_dsi_host_attach() tries to access the released encoder (which is > > > > > > > > > > > > > > zeroed in drm_encoder_release) and rest of resources, what causes > > > > > > > > > > > > > > failure. > > > > > > > > > > > > > > > > > > > > > > > > > > > > It looks that something is missing. Maybe mipi host has to be > > > > > > > > > > > > > > registered > > > > > > > > > > > > > > later, when bridge is ready? I have no idea how it is handled before > > > > > > > > > > > > > > this patch. Andrzej, could you comment it a bit? > > > > > > > > > > > > > I intentionally changed the order, because if another bridge follows > > > > > > > > > > > > > in the > > > > > > > > > > > > > pipeline, the probe of the drm driver has to be deferred until some > > > > > > > > > > > > > bridge > > > > > > > > > > > > > provides a connector. The next bridge registers itself via the > > > > > > > > > > > > > host_attach > > > > > > > > > > > > > function and the deferral is ensured via the bind for the bind/unbind > > > > > > > > > > > > > API or > > > > > > > > > > > > > the bridge_attach function otherwise. > > > > > > > > > > > > > > > > > > > > > > > > > > On the other hand, the bridge does not have an encoder until the mipi > > > > > > > > > > > > > device > > > > > > > > > > > > > has been attached. > > > > > > > > > > > > > > > > > > > > > > > > > > As a solution, the exynos dsi driver must initialize the encoder in > > > > > > > > > > > > > exynos_dsi_probe instead of in exynos_dsi_bind and access the encoder > > > > > > > > > > > > > via > > > > > > > > > > > > > exynos_dsi instead of the bridge. > > > > > > > > > > > > > > > > > > > > > > > > > > Can you try to move everything except samsung_dsim_bind from > > > > > > > > > > > > > exynos_dsi_bind > > > > > > > > > > > > > to exynos_dsi_probe (respectively for unbind) and report if it fixes the > > > > > > > > > > > > > crash. > > > > > > > > > > > > > > > > > > > > > > > > The original behaviour is that encoder (exynos_dsi) is registered > > > > > > > > > > > > regardless of sink presence (initially panel, later also bridge) - it > > > > > > > > > > > > avoids multiple issues with deferred probe, device driver bind/unbind > > > > > > > > > > > > and module load/unload. Appearance or disappearance of sink is > > > > > > > > > > > > reported to host nicely via DSI attach/detach callbacks - and it is > > > > > > > > > > > > reflected in drm world as change state of the connector. > > > > > > > > > > > > > > > > > > > > > > > > Registering DSI host in bind and unregistering in unbind assures that > > > > > > > > > > > > if mipi_dsi device is attached/detached the drm device is always > > > > > > > > > > > > present - it makes device/driver binding race free and allows to avoid > > > > > > > > > > > > additional locking. > > > > > > > > > > > > > > > > > > > > > > > > Moving DSI host registration to probe changes everything, for sure it > > > > > > > > > > > > breaks the nice feature of DSI attach/detach callbacks and apparently > > > > > > > > > > > > can cause different issues depending on device bind order. > > > > > > > > > > > > > > > > > > > > > > > > I will try to look at the patches tomorrow and maybe I can find more > > > > > > > > > > > > constructive comments :) > > > > > > > > > > > > > > > > > > > > > > As I said yesterday, exynos_dsi driver uses dsi host attach/detach > > > > > > > > > > > callbacks to control appearance/disappearance of downstream device. It > > > > > > > > > > > allows to: > > > > > > > > > > > > > > > > > > > > > > 1. Safely bind/unbind different device drivers at any time and at any > > > > > > > > > > > order, without killing exynos_drm and/or crashing system. > > > > > > > > > > > > > > > > > > > > > > 2. Avoid issues with late drm init - on some platforms exynos_drm device > > > > > > > > > > > appeared too late, due to deferred probe, and resulted in black screen > > > > > > > > > > > in userspace. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Now if we want to convert exynos_dsi to drm_bridge I see following options: > > > > > > > > > > > > > > > > > > > > > > A. Forgot about callbacks and make the exynos_drm to defer probing until > > > > > > > > > > > exynos_dsi bridge is available, probably it will cause later exynos_drm > > > > > > > > > > > appearance, thus probably black screen on some targets. So for sure it > > > > > > > > > > > will be suboptimal. Making it bridge unbind safe would be another > > > > > > > > > > > problem, but most developers do not care about it so why should we? :) > > > > > > > > > > > > > > > > > > > > > > B. Try to mimic current behaviour - exynos_dsi register bridge ASAP, > > > > > > > > > > > even if downstream devices are not yet attached, on attach/detach notify > > > > > > > > > > > drm about it via connector status change, for this dsi_host registration > > > > > > > > > > > should be performed from drm_bridge attach, I guess. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Option A is more standard, but is unsafe and causes other issues. > > > > > > > > > > > > > > > > > > > > > > Option B keeps current behaviour. > > > > > > > > > > Maybe we can have both, but I am not sure, if I am missing something: > > > > > > > > > > > > > > > > > > > > I still prefer option A for the samsung-dsim driver, because it is more > > > > > > > > > > standard, simpler and avoids issues with encoders, connectors or handling > > > > > > > > > > hotplug. > > > > > > > > > > > > > > > > > > > > The idea is to use two bridges in the exynos-dsi driver: One bridge in the > > > > > > > > > > samsung-dsim driver which implements option A and defers probing of the drm > > > > > > > > > > driver until the next bridge is attached. And a second bridge in the > > > > > > > > > > exynos_dsi that attaches to the first bridge (thus, allowing the exynos_drm > > > > > > > > > > device to appear) and implements the hotplug handling for notifying drm via > > > > > > > > > > connector status change. > > > > > > > > > > > > > > > > > > > > The driver for the i.MX8M would use the samsung-dsim bridge without an > > > > > > > > > > additional bridge. > > > > > > > > > > > > > > > > > > > > This allows the samsung-dsim driver to expose the standard behavior while the > > > > > > > > > > exynos_dsi may stick to the existing behavior for the exynos_drm driver. > > > > > > > > > > > > > > > > > > > > I hope this makes sense and does not sound too crazy. It might be difficult to > > > > > > > > > > get the probing and mipi host/device registration correct, but I will try, if > > > > > > > > > > this can work. > > > > > > > > > Adding two bridges for being able to support hotplugging adds many special > > > > > > > > > cases to the bridge driver and still requires more custom API to correctly add > > > > > > > > > the second bridge. I don't think that this a viable path to go. > > > > > > > > Just jumping in here: You cannot hotplug/hotremove anything from a > > > > > > > > drm_device after drm_dev_register has been called, except > > > > > > > > drm_connector. I didn't dig into details here so not sure whether you > > > > > > > > want to late-bind your bridge after drm_dev_register is called or not, > > > > > > > > so might just be fyi and not relevant to the discussion. > > > > > > > Thanks. AFAIC that is exactly what is currently implemented in the exynos_drm > > > > > > > driver (i.e. Option B) > > > > > > > > > > > > > > exynos_dsi_bind configures the encoder and registers a DSI host. Afterwards, > > > > > > > exynos_drm_bind (as component_master_ops) calls drm_dev_register. Later, a DSI > > > > > > > device might attach to the DSI host and call exynos_dsi_host_attach. In > > > > > > > exynos_dsi_host_attach, the driver finds the drm_bridge for the DSI device and > > > > > > > attaches this bridge to the encoder _after_ drm_dev_register has been called. > > > > > > > This is invalid behavior, right? > > > > > > Definitely not supported, I don't think we have the right locks in place > > > > > > to make sure this works. > > > > > > > > > > > > Now if your _only_ adding a drm_bridge (and not an encoder or anything > > > > > > like that), and you are adding the drm_connector correctly (like a > > > > > > hotplugged DP MST sink), then that would at least work from a uapi pov. > > > > > > Because drm_bridge isn't exposed as an uapi object. > > > > > > > > > > > > But yeah, as-is, don't :-) > > > > > > > > > > > > The solution here is a bunch of EPROBE_DEFER handling until all your > > > > > > bridges are loaded, with or without the assistance of component.c > > > > > > framework. Only then call drm_dev_register. > > > > > > > > > > I have impression we have similar conversation already. > > > > > > > > > > As you stated drm_bridge and drm_panel are not exposed to userspace so > > > > > there shouldn't be problem with them from uapi PoV. > > > > > > > > > > On the other side drm_panel or drm_bridge are not used until pipeline > > > > > enters connected state (at least they were not some time ago :) ). The > > > > > issue is that bridge exposes drm_connector, but as you stated (again :) > > > > > ) connectors can be hotplugged, so in theory it should work. Practical > > > > > tests shows that it also works, but bugs can be still there. > > > > > > > > > > Bunch of EPROBE_DEFER was very slow (as a result userspace timeouted and > > > > > decided there is no display), and does not handle unbinding/re-binding > > > > > drivers. > > > > > > > > Rebinding drivers should be fixed now, with a bunch of fixes in driver > > > > core. If not, we need to fix this more. > > > > > > > > Also, EPROBE_DEFER is how this is supposed to work. If it's too slow, > > > > we need to fix EPROBE_DEFER (there's ideas for pre-sorting that never > > > > seem to go anywhere), not paper over it with bad architecture in > > > > drivers. > > > > > > I've heard this argument multiple times, but it sounds more like an > > > attempt to ignore the problem and hope it will fall on someone else's > > > plate :-) Improvement in the probe deferral mechanism are certainly an > > > option to explore, but as far as I can tell nobody has proven that this > > > mechanism is or will be able to solve all problems related to probe > > > ordering dependencies. I wouldn't rule out the need for different > > > solutions for some of the issues. > > > > Then build another one. But adding hotplug for stuff that is there, > > and shouldn't be hotplugged, just because it's easier on driver > > writers and harder on userspace isn't really a good approach. > > -Daniel > > I think it is quite clear that replacing or reworking the deferral mechanism > is out of scope for this discussion, which is why I would like to come back > to the original issue and sum this up as far as I understand it (which is > not really far when it comes to the details): > > We have the existing exynos driver that avoids the standard deferral > mechanism in favor of something that works but Daniel describes as > "definitely not supported". > > We have a proposal from Michael for converting the driver to the standard > drm_bridge behavior and more work from Michael and Marek based on this to > implement the platform specific parts for i.MX8MM. > > From the i.MX8MM POV this approach already received some testing and looks > good as far as I can judge. Upstreaming this solution is blocked because of > objections from the Samsung maintainers. > > Sorry if I'm being blunt or naive, but where to go from here? > Maybe some more information by the Samsung maintainers would help: If I understand correctly, the main reason for the non-standard behavior is a userspace application that runs into a timeout if the drm-device does not appear in time. Correct? Is there something we can do about that? The other reason is the convenience of binding and unbinding a bridge driver, while the drm device is kept available. Correct? Is this used in development, testing, or production? Is there anything else that prevents the exynos drm from switching to the standard behavior? Would a exynos drm specific wrapper, which uses a standard bridge driver but exposes the non-standard behavior, be acceptable? (Unfortunately, my first try on something like that felt really awkward and didn't really work.) Michael _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
