Hi Rob Herring, thanks for the comments. On Tue, Feb 09, 2021 at 01:30:10PM -0600, Rob Herring wrote: > On Thu, Jan 28, 2021 at 11:08:26AM +0800, Xin Ji wrote: > > Add 'bus-type' and 'data-lanes' define for port0, add HDCP support > > flag and DP tx lane0 and lane1 swing register array define. > > > > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx> > > --- > > .../bindings/display/bridge/analogix,anx7625.yaml | 54 +++++++++++++++++++++- > > 1 file changed, 53 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > index c789784..048deec 100644 > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > @@ -34,6 +34,24 @@ properties: > > description: used for reset chip control, RESET_N pin B7. > > maxItems: 1 > > > > + analogix,lane0-swing: > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > + maxItems: 20 > > + description: > > + an array of swing register setting for DP tx lane0 PHY, please don't > > + add this property, or contact vendor. > > + > > + analogix,lane1-swing: > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > + maxItems: 20 > > + description: > > + an array of swing register setting for DP tx lane1 PHY, please don't > > + add this property, or contact vendor. > > + > > + analogix,hdcp-support: > > + type: boolean > > + description: indicate the DP tx HDCP support or not. > > Please show the new properties in the example. OK, I'll add it in the example. > > > + > > ports: > > $ref: /schemas/graph.yaml#/properties/ports > > > > @@ -41,13 +59,45 @@ properties: > > port@0: > > $ref: /schemas/graph.yaml#/properties/port > > description: > > - Video port for MIPI DSI input. > > + Video port for MIPI input. > > + > > + properties: > > + endpoint: > > + type: object > > + additionalProperties: false > > + > > + # Properties described in > > + # Documentation/devicetree/bindings/media/video-interfaces.txt > > Now video-interfaces.yaml which should have a $ref here. It's currently > in media tree and linux-next. Follow the examples there. You'll also > have to wait for 5.12-rc1 to apply to drm-misc. OK. > > > + properties: > > + remote-endpoint: true > > + bus-type: true > > + data-lanes: true > > + > > + required: > > + - remote-endpoint > > + > > + required: > > + - endpoint > > + > > > > port@1: > > $ref: /schemas/graph.yaml#/properties/port > > description: > > Video port for panel or connector. > > > > + properties: > > + endpoint: > > + type: object > > + additionalProperties: false > > + > > + # Properties described in > > + # Documentation/devicetree/bindings/media/video-interfaces.txt > > + properties: > > + remote-endpoint: true > > + > > + required: > > + - remote-endpoint > > + > > required: > > - port@0 > > - port@1 > > @@ -81,6 +131,8 @@ examples: > > reg = <0>; > > anx7625_in: endpoint { > > remote-endpoint = <&mipi_dsi>; > > + bus-type = <5>; > > + data-lanes = <0 1 2 3>; > > }; > > }; > > > > -- > > 2.7.4 > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel