On Sat, 13 Feb 2021 12:15:10 +0200, Mikko Perttunen wrote: > Convert the original Host1x bindings to YAML and add new bindings for > NVDEC, now in a more appropriate location. The old text bindings > for Host1x and engines are still kept at display/tegra/ since they > encompass a lot more engines that haven't been converted over yet. > > Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx> > --- > .../gpu/host1x/nvidia,tegra20-host1x.yaml | 129 ++++++++++++++++++ > .../gpu/host1x/nvidia,tegra210-nvdec.yaml | 90 ++++++++++++ > MAINTAINERS | 1 + > 3 files changed, 220 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra20-host1x.yaml > create mode 100644 Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml:90:1: [warning] too many blank lines (2 > 1) (empty-lines) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1440164 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
