The existing driver has an enablement code for initializing
clock, reset, PHY, DSI timings, and finally switching to HS
mode.
Move the clock, reset. PHY and DSI timings code into bridge
pre_enable and keep HS mode switch in enable.
As the driver supports fully enabled bridge functionalities,
this new enablement code separation will help to initialize
the host and slave bridge pre_enable, enable functions properly.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v3:
- new patch
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 6f3c5330a468..3cdc14daf25c 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -714,7 +714,7 @@ static int sun6i_dsi_start(struct sun6i_dsi *dsi,
return 0;
}
-static void sun6i_dsi_bridge_enable(struct drm_bridge *bridge)
+static void sun6i_dsi_bridge_pre_enable(struct drm_bridge *bridge)
{
struct drm_display_mode *mode = &bridge->encoder->crtc->state->adjusted_mode;
struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
@@ -775,6 +775,11 @@ static void sun6i_dsi_bridge_enable(struct drm_bridge *bridge)
if (dsi->panel_bridge)
dsi->panel_bridge->funcs->pre_enable(dsi->panel_bridge);
+}
+
+static void sun6i_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+ struct sun6i_dsi *dsi = bridge_to_sun6i_dsi(bridge);
/*
* FIXME: This should be moved after the switch to HS mode.
@@ -883,6 +888,7 @@ static int sun6i_dsi_bridge_attach(struct drm_bridge *bridge,
}
static const struct drm_bridge_funcs sun6i_dsi_bridge_funcs = {
+ .pre_enable = sun6i_dsi_bridge_pre_enable,
.enable = sun6i_dsi_bridge_enable,
.disable = sun6i_dsi_bridge_disable,
.attach = sun6i_dsi_bridge_attach,
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
