On Mon, Feb 08, 2021 at 06:38:59PM -0500, Lyude Paul wrote: > Also, stop printing the DPCD register that failed, and just describe it > instead. Saves us from having to look up each register offset when reading > through kernel logs (plus, DPCD dumping with drm.debug |= 0x100 will give > us that anyway). > > Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> > --- > .../drm/i915/display/intel_dp_aux_backlight.c | 101 +++++++++--------- > 1 file changed, 52 insertions(+), 49 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > index a139f0e08839..a98d9bd4b0ed 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > @@ -274,14 +274,12 @@ static bool intel_dp_aux_vesa_backlight_dpcd_mode(struct intel_connector *connec > { > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct drm_i915_private *i915 = dp_to_i915(intel_dp); > + int ret; > u8 mode_reg; > > - if (drm_dp_dpcd_readb(&intel_dp->aux, > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, > - &mode_reg) != 1) { > - drm_dbg_kms(&i915->drm, > - "Failed to read the DPCD register 0x%x\n", > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER); > + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to read backlight mode: %d\n", ret); > return false; > } > > @@ -297,6 +295,7 @@ static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, en > { > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct drm_i915_private *i915 = dp_to_i915(intel_dp); > + int ret; > u8 read_val[2] = { 0x0 }; > u16 level = 0; > > @@ -307,10 +306,10 @@ static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, en > if (!intel_dp_aux_vesa_backlight_dpcd_mode(connector)) > return connector->panel.backlight.max; > > - if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val, > - sizeof(read_val)) != sizeof(read_val)) { > - drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n", > - DP_EDP_BACKLIGHT_BRIGHTNESS_MSB); > + ret = drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val, > + sizeof(read_val)); > + if (ret != sizeof(read_val)) { > + drm_dbg_kms(&i915->drm, "Failed to read brightness level: %d\n", ret); > return 0; > } > > @@ -333,6 +332,7 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state, > struct intel_connector *connector = to_intel_connector(conn_state->connector); > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct drm_i915_private *i915 = dp_to_i915(intel_dp); > + int ret; > u8 vals[2] = { 0x0 }; > > /* Write the MSB and/or LSB */ > @@ -343,10 +343,10 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state, > vals[0] = level; > } > > - if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals, > - sizeof(vals)) != sizeof(vals)) { > - drm_dbg_kms(&i915->drm, > - "Failed to write aux backlight level\n"); > + ret = drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals, > + sizeof(vals)); > + if (ret != sizeof(vals)) { > + drm_dbg_kms(&i915->drm, "Failed to write aux backlight level: %d\n", ret); > return; > } > } > @@ -355,26 +355,28 @@ static void set_vesa_backlight_enable(struct intel_connector *connector, bool en > { > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct drm_i915_private *i915 = dp_to_i915(intel_dp); > + int ret; > u8 reg_val = 0; > > /* Early return when display use other mechanism to enable backlight. */ > if (!connector->panel.backlight.edp.vesa.aux_enable) > return; > > - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, ®_val) != 1) { > - drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n", > - DP_EDP_DISPLAY_CONTROL_REGISTER); > + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, ®_val); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to read eDP display control register: %d\n", ret); > return; > } > + > if (enable) > reg_val |= DP_EDP_BACKLIGHT_ENABLE; > else > reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE); > > - if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, > - reg_val) != 1) { > - drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n", > - enable ? "enable" : "disable"); > + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, reg_val); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to %s aux backlight: %d\n", > + enable ? "enable" : "disable", ret); > } > } > > @@ -386,13 +388,13 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state, > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct drm_i915_private *i915 = dp_to_i915(intel_dp); > struct intel_panel *panel = &connector->panel; > + int ret; > u8 dpcd_buf, new_dpcd_buf; > u8 pwmgen_bit_count = panel->backlight.edp.vesa.pwmgen_bit_count; > > - if (drm_dp_dpcd_readb(&intel_dp->aux, > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) { > - drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n", > - DP_EDP_BACKLIGHT_MODE_SET_REGISTER); > + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to read backlight mode: %d\n", ret); > return; > } > > @@ -402,24 +404,26 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state, > new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; > new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; > > - if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, > - pwmgen_bit_count) != 1) > - drm_dbg_kms(&i915->drm, > - "Failed to write aux pwmgen bit count\n"); > + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pwmgen_bit_count); > + if (ret != 1) > + drm_dbg_kms(&i915->drm, "Failed to write aux pwmgen bit count: %d\n", ret); > } > > if (panel->backlight.edp.vesa.pwm_freq_pre_divider) { > - if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET, > - panel->backlight.edp.vesa.pwm_freq_pre_divider) == 1) > + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET, > + panel->backlight.edp.vesa.pwm_freq_pre_divider); > + if (ret == 1) > new_dpcd_buf |= DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE; > else > - drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency\n"); > + drm_dbg_kms(&i915->drm, "Failed to write aux backlight frequency: %d\n", > + ret); > } > > if (new_dpcd_buf != dpcd_buf) { > - if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, > - new_dpcd_buf) != 1) > - drm_dbg_kms(&i915->drm, "Failed to write aux backlight mode\n"); > + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER, > + new_dpcd_buf); > + if (ret != 1) > + drm_dbg_kms(&i915->drm, "Failed to write aux backlight mode: %d\n", ret); > } > > intel_dp_aux_vesa_set_backlight(conn_state, level); > @@ -446,11 +450,12 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto > struct intel_dp *intel_dp = intel_attached_dp(connector); > struct intel_panel *panel = &connector->panel; > u32 max_backlight = 0; > - int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1; > + int ret, freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1; > u8 pn, pn_min, pn_max; > > - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn) != 1) { > - drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap\n"); > + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, &pn); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap: %d\n", ret); > return 0; > } > > @@ -479,16 +484,14 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto > * - FxP is within 25% of desired value. > * Note: 25% is arbitrary value and may need some tweak. > */ > - if (drm_dp_dpcd_readb(&intel_dp->aux, > - DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) { > - drm_dbg_kms(&i915->drm, > - "Failed to read pwmgen bit count cap min\n"); > + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap min: %d\n", ret); > return max_backlight; > } > - if (drm_dp_dpcd_readb(&intel_dp->aux, > - DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) { > - drm_dbg_kms(&i915->drm, > - "Failed to read pwmgen bit count cap max\n"); > + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count cap max: %d\n", ret); > return max_backlight; > } > pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK; > @@ -512,9 +515,9 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto > } > > drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn); > - if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pn) != 1) { > - drm_dbg_kms(&i915->drm, > - "Failed to write aux pwmgen bit count\n"); > + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, pn); > + if (ret != 1) { > + drm_dbg_kms(&i915->drm, "Failed to write aux pwmgen bit count: %d\n", ret); > return max_backlight; > } > > -- > 2.29.2 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel