Re: [PATCH] drm/bridge: anx7625: enable DSI EOTP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 4, 2021 at 8:59 PM Andrzej Hajda <a.hajda@xxxxxxxxxxx> wrote:
>
>
> W dniu 04.02.2021 o 13:34, Nicolas Boichat pisze:
> > On Thu, Feb 4, 2021 at 8:07 PM Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> >> Hi Xin,
> >>
> >> Thanks for the patch.
> >>
> >> On Thu, 28 Jan 2021 at 12:17, Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
> >>> Enable DSI EOTP feature for fixing some panel screen constance
> >>> shift issue.
> >>> Removing MIPI flag MIPI_DSI_MODE_EOT_PACKET to enable DSI EOTP.
> >> I don't think I quite understand how removing the
> >> MIPI_DSI_MODE_EOT_PACKET flag will cause DSI EOTP to be enabled. Could
> >> you extrapolate on this in the commit message?
> > That confused me as well, but it turns out that's how the flag is defined:
> > ```
> > /* disable EoT packets in HS mode */
> > #define MIPI_DSI_MODE_EOT_PACKET BIT(9)
> > ```
> > (https://protect2.fireeye.com/v1/url?k=5bd95ebd-044267fb-5bd8d5f2-0cc47a3003e8-ce9db8ea264d6901&q=1&e=900556dc-d199-4c18-9432-5c3465a98eae&u=https%3A%2F%2Felixir.bootlin.com%2Flinux%2Flatest%2Fsource%2Finclude%2Fdrm%2Fdrm_mipi_dsi.h%23L129)
> >
> > I'm almost tempted to put together a mass patch to rename all of these flags...
>
>
> Yes that would be good, many of these flags were just copy pasted from
> some hw datasheet, without good analysis how to adapt them to the framework.

I'll look into it (but that shouldn't block this patch).

>
>
> Regards
>
> Andrzej
>
>
> >
> >>> Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> >>> ---
> >>>   drivers/gpu/drm/bridge/analogix/anx7625.c | 1 -
> >>>   1 file changed, 1 deletion(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> >>> index 65cc059..e31eeb1b 100644
> >>> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> >>> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> >>> @@ -1334,7 +1334,6 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx)
> >>>          dsi->format = MIPI_DSI_FMT_RGB888;
> >>>          dsi->mode_flags = MIPI_DSI_MODE_VIDEO   |
> >>>                  MIPI_DSI_MODE_VIDEO_SYNC_PULSE  |
> >>> -               MIPI_DSI_MODE_EOT_PACKET        |
> >>>                  MIPI_DSI_MODE_VIDEO_HSE;
> >>>
> >>>          if (mipi_dsi_attach(dsi) < 0) {
> >>> --
> >>> 2.7.4
> >>>
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://protect2.fireeye.com/v1/url?k=457f3f39-1ae4067f-457eb476-0cc47a3003e8-b702072da729d8c9&q=1&e=900556dc-d199-4c18-9432-5c3465a98eae&u=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Fdri-devel
> >
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux