On Thu, Jan 14, 2021 at 05:22:09PM +0800, Liu Ying wrote: > This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). > > Signed-off-by: Liu Ying <victor.liu@xxxxxxx> > --- > v1->v2: > * Use graph schema. (Laurent) > * Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent) > > .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 176 +++++++++++++++++++++ > 1 file changed, 176 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > new file mode 100644 > index 00000000..514ac90 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > @@ -0,0 +1,176 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qm/qxp LVDS Display Bridge > + > +maintainers: > + - Liu Ying <victor.liu@xxxxxxx> > + > +description: | > + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. > + > + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color > + format and can map the input to VESA or JEIDA standards. The two channels > + cannot be used simultaneously, that is to say, the user should pick one of > + them to use. Two LDB channels from two LDB instances can work together in > + LDB split mode to support a dual link LVDS display. The channel indexes > + have to be different. Channel0 outputs odd pixels and channel1 outputs > + even pixels. > + > + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel > + input color format. The two channels can be used simultaneously, either > + in dual mode or split mode. In dual mode, the two channels output identical > + data. In split mode, channel0 outputs odd pixels and channel1 outputs even > + pixels. > + > + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in > + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in > + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming > + consistency, this binding calls it LDB. > + > +properties: > + compatible: > + enum: > + - fsl,imx8qm-ldb > + - fsl,imx8qxp-ldb > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + clocks: > + items: > + - description: pixel clock > + - description: bypass clock > + > + clock-names: > + items: > + - const: pixel > + - const: bypass > + > + power-domains: > + maxItems: 1 > + > + fsl,syscon: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + A phandle which points to Control and Status Registers(CSR) module. Again, seems like this binding should be a child of the syscon. > + > + fsl,companion-ldb: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + A phandle which points to companion LDB which is used in LDB split mode. > + > +patternProperties: > + "^channel@[0-1]$": > + type: object > + description: Represents a channel of LDB. > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + reg: > + description: The channel index. > + enum: [ 0, 1 ] > + > + phys: > + description: A phandle to the phy module representing the LVDS PHY. > + maxItems: 1 > + > + phy-names: > + const: lvds_phy > + > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Input port of the channel. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: Output port of the channel. > + > + required: > + - "#address-cells" > + - "#size-cells" > + - reg > + - phys > + - phy-names > + > + additionalProperties: false > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" > + - clocks > + - clock-names > + - power-domains > + - fsl,syscon > + - channel@0 > + - channel@1 > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: fsl,imx8qm-ldb > + then: > + properties: > + fsl,companion-ldb: false > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/firmware/imx/rsrc.h> > + ldb { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx8qxp-ldb"; > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, > + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; > + clock-names = "pixel", "bypass"; > + power-domains = <&pd IMX_SC_R_LVDS_0>; > + fsl,syscon = <&mipi_lvds_0_csr>; > + > + channel@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + phys = <&mipi_lvds_0_phy>; > + phy-names = "lvds_phy"; > + > + port@0 { > + reg = <0>; > + > + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; > + }; > + }; > + }; > + > + channel@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + phys = <&mipi_lvds_0_phy>; > + phy-names = "lvds_phy"; > + > + port@0 { > + reg = <0>; > + > + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; > + }; > + }; > + }; > + }; > -- > 2.7.4 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
