On Wed, Jan 06, 2021 at 05:17:55PM +0200, Laurent Pinchart wrote:
> Hi Rob,
>
> Given that the maintainers property is mandatory in the schema, what's
> the procedure when no maintainer steps up for a converter YAML binding ?
Delete it if no one cares...
Typically we just put a subsystem or platform maintainer.
>
> On Tue, Jan 05, 2021 at 08:08:16AM +0200, Laurent Pinchart wrote:
> > Convert the Rockchip HDMI TX text binding to YAML.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > ---
> > Changes since v2:
> >
> > - Use Mark's @gmail.com e-mail address as the @rock-chips.com address
> > bounces
> >
> > Changes since v1:
> >
> > - Drop pinctrl-0 and pinctrl-1
> > - Use unevaluatedProperties instead of additionalProperties
> > - Drop reg and interrupts as they're checked in the base schema
> > - Rebase on top of OF graph schema, dropped redundant properties
> > - Fix identation for enum entries
> > - Tidy up clock names
> > ---
> > .../display/rockchip/dw_hdmi-rockchip.txt | 74 --------
> > .../display/rockchip/rockchip,dw-hdmi.yaml | 158 ++++++++++++++++++
> > 2 files changed, 158 insertions(+), 74 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > deleted file mode 100644
> > index 3d32ce137e7f..000000000000
> > --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > +++ /dev/null
> > @@ -1,74 +0,0 @@
> > -Rockchip DWC HDMI TX Encoder
> > -============================
> > -
> > -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
> > -with a companion PHY IP.
> > -
> > -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> > -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
> > -following device-specific properties.
> > -
> > -
> > -Required properties:
> > -
> > -- compatible: should be one of the following:
> > - "rockchip,rk3228-dw-hdmi"
> > - "rockchip,rk3288-dw-hdmi"
> > - "rockchip,rk3328-dw-hdmi"
> > - "rockchip,rk3399-dw-hdmi"
> > -- reg: See dw_hdmi.txt.
> > -- reg-io-width: See dw_hdmi.txt. Shall be 4.
> > -- interrupts: HDMI interrupt number
> > -- clocks: See dw_hdmi.txt.
> > -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
> > -- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
> > - corresponding to the video input of the controller. The port shall have two
> > - endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
> > -- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
> > -
> > -Optional properties
> > -
> > -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
> > - or the functionally-reduced I2C master contained in the DWC HDMI. When
> > - connected to a system I2C master this property contains a phandle to that
> > - I2C master controller.
> > -- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
> > -- clock-names: May contain "cec" as defined in dw_hdmi.txt.
> > -- clock-names: May contain "grf", power for grf io.
> > -- clock-names: May contain "vpll", external clock for some hdmi phy.
> > -- phys: from general PHY binding: the phandle for the PHY device.
> > -- phy-names: Should be "hdmi" if phys references an external phy.
> > -
> > -Optional pinctrl entry:
> > -- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
> > - will switch to the unwedge pinctrl state for 10ms if it ever gets an
> > - i2c timeout. It's intended that this unwedge pinctrl entry will
> > - cause the SDA line to be driven low to work around a hardware
> > - errata.
> > -
> > -Example:
> > -
> > -hdmi: hdmi@ff980000 {
> > - compatible = "rockchip,rk3288-dw-hdmi";
> > - reg = <0xff980000 0x20000>;
> > - reg-io-width = <4>;
> > - ddc-i2c-bus = <&i2c5>;
> > - rockchip,grf = <&grf>;
> > - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> > - clock-names = "iahb", "isfr";
> > - ports {
> > - hdmi_in: port {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - hdmi_in_vopb: endpoint@0 {
> > - reg = <0>;
> > - remote-endpoint = <&vopb_out_hdmi>;
> > - };
> > - hdmi_in_vopl: endpoint@1 {
> > - reg = <1>;
> > - remote-endpoint = <&vopl_out_hdmi>;
> > - };
> > - };
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > new file mode 100644
> > index 000000000000..d3b2f87f152a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > @@ -0,0 +1,158 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Rockchip DWC HDMI TX Encoder
> > +
> > +maintainers:
> > + - Mark Yao <markyao0591@xxxxxxxxx>
> > +
> > +description: |
> > + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
> > + with a companion PHY IP.
> > +
> > +allOf:
> > + - $ref: ../bridge/synopsys,dw-hdmi.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - rockchip,rk3228-dw-hdmi
> > + - rockchip,rk3288-dw-hdmi
> > + - rockchip,rk3328-dw-hdmi
> > + - rockchip,rk3399-dw-hdmi
> > +
> > + reg-io-width:
> > + const: 4
> > +
> > + clocks:
> > + minItems: 2
> > + maxItems: 5
> > + items:
> > + - {}
> > + - {}
> > + # The next three clocks are all optional, but shall be specified in this
> > + # order when present.
> > + - description: The HDMI CEC controller main clock
> > + - description: Power for GRF IO
> > + - description: External clock for some HDMI PHY
> > +
> > + clock-names:
> > + minItems: 2
> > + maxItems: 5
> > + items:
> > + - {}
> > + - {}
> > + - enum:
> > + - cec
> > + - grf
> > + - vpll
> > + - enum:
> > + - grf
> > + - vpll
> > + - const: vpll
> > +
> > + ddc-i2c-bus:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description:
> > + The HDMI DDC bus can be connected to either a system I2C master or the
> > + functionally-reduced I2C master contained in the DWC HDMI. When connected
> > + to a system I2C master this property contains a phandle to that I2C
> > + master controller.
> > +
> > + phys:
> > + maxItems: 1
> > + description: The HDMI PHY
> > +
> > + phy-names:
> > + const: hdmi
> > +
> > + pinctrl-names:
> > + description:
> > + The unwedge pinctrl entry shall drive the DDC SDA line low. This is
> > + intended to work around a hardware errata that can cause the DDC I2C
> > + bus to be wedged.
> > + items:
> > + - const: default
> > + - const: unwedge
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description: Input of the DWC HDMI TX
> > +
> > + properties:
> > + endpoint@0:
> > + $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > + unevaluatedProperties: false
> > + description: Connection to the VOPB
> > +
> > + endpoint@1:
> > + $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > + unevaluatedProperties: false
> > + description: Connection to the VOPL
> > +
> > + required:
> > + - endpoint@0
> > + - endpoint@1
> > +
> > + required:
> > + - port
> > +
> > + rockchip,grf:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description:
> > + phandle to the GRF to mux vopl/vopb.
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-io-width
> > + - clocks
> > + - clock-names
> > + - interrupts
> > + - ports
> > + - rockchip,grf
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/rk3288-cru.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > + hdmi: hdmi@ff980000 {
> > + compatible = "rockchip,rk3288-dw-hdmi";
> > + reg = <0xff980000 0x20000>;
> > + reg-io-width = <4>;
> > + ddc-i2c-bus = <&i2c5>;
> > + rockchip,grf = <&grf>;
> > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> > + clock-names = "iahb", "isfr";
> > +
> > + ports {
> > + port {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hdmi_in_vopb: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&vopb_out_hdmi>;
> > + };
> > + hdmi_in_vopl: endpoint@1 {
> > + reg = <1>;
> > + remote-endpoint = <&vopl_out_hdmi>;
> > + };
> > + };
> > + };
> > + };
> > +
> > +...
>
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
