On Sun, Jan 10, 2021 at 5:09 PM Oliver Graute <oliver.graute@xxxxxxxxx> wrote: > here the schematics and my dts. The board is using a LVDS connector for > the display. The schematics shows the GKTW70SDAD1SD panel in the J4 connector, not the LVDS J7 connector. > https://www.variscite.de/wp-content/uploads/2017/12/VAR-6ULCustomboard-Schematics.pdf > https://lore.kernel.org/linux-arm-kernel/1610144511-19018-3-git-send-email-oliver.graute@xxxxxxxxx/ As I mentioned earlier you should remove the display timings from the dts when using the compatible string for the panel. power-supply = <®_touch_3v3> is not correct, as the reg_touch_3v3 does not power the LCD. Another hint is to use the PLL5_VIDEO as the clock source for the lcdif controller as done in the imx6ul evk dtsi. It would also help if you could share the complete boot log. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel