On 10/01/21, Fabio Estevam wrote: > Hi Oliver, > > On Sun, Jan 10, 2021 at 12:35 PM Oliver Graute <oliver.graute@xxxxxxxxx> wrote: > > > the first two errors are gone. But I still get this: > > > > [ 42.387107] mxsfb 21c8000.lcdif: Cannot connect bridge: -517 > > > > The panel is still off perhaps I miss something else. > > Some suggestions: > > - Take a look at arch/arm/boot/dts/imx6ul-14x14-evk.dtsi as a > reference as it has display functional > - Use imx_v6_v7_defconfig to make sure all the required drivers are selected ok I checked imx6ul-14x14-evk.dtsi and use imx_v6_v7_defconfig > - If it still does not work, share the dts and schematics here the schematics and my dts. The board is using a LVDS connector for the display. https://www.variscite.de/wp-content/uploads/2017/12/VAR-6ULCustomboard-Schematics.pdf https://lore.kernel.org/linux-arm-kernel/1610144511-19018-3-git-send-email-oliver.graute@xxxxxxxxx/ Thx for your help, Best Regards, Oliver _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
