It turned out(Maxime suggestion) that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to invert DCLK polarity and this makes thing really easier than before. So let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_POSITIVE as bit 26 and activating according to bus_flags the same way is done for all the other signals. Cc: Maxime Ripard <maxime@xxxxxxxxxx> Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 20 +------------------- drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 + 2 files changed, 2 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 52598bb0fb0b..30171ccd87e5 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -569,26 +569,8 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (info->bus_flags & DRM_BUS_FLAG_DE_LOW) val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) - clk_set_phase(tcon->dclk, 0); - - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE) - clk_set_phase(tcon->dclk, 240); + val |= SUN4I_TCON0_IO_POL_DCLK_POSITIVE; regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index cfbf4e6c1679..0ce71d10a31b 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -113,6 +113,7 @@ #define SUN4I_TCON0_IO_POL_REG 0x88 #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) #define SUN4I_TCON0_IO_POL_DE_NEGATIVE BIT(27) +#define SUN4I_TCON0_IO_POL_DCLK_POSITIVE BIT(26) #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) #define SUN4I_TCON0_IO_POL_VSYNC_POSITIVE BIT(24) -- 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
