This converts the v3d bindings to yaml format.
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
.../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 33 ----------
.../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 76 ++++++++++++++++++++++
2 files changed, 76 insertions(+), 33 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
create mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
deleted file mode 100644
index b2df82b..0000000
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Broadcom V3D GPU
-
-Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
-For V3D 2.x, see brcm,bcm-vc4.txt.
-
-Required properties:
-- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
-- reg: Physical base addresses and lengths of the register areas
-- reg-names: Names for the register areas. The "hub" and "core0"
- register areas are always required. The "gca" register area
- is required if the GCA cache controller is present. The
- "bridge" register area is required if an external reset
- controller is not present.
-- interrupts: The interrupt numbers. The first interrupt is for the hub,
- while the following interrupts are separate interrupt lines
- for the cores (if they don't share the hub's interrupt).
- See bindings/interrupt-controller/interrupts.txt
-
-Optional properties:
-- clocks: The core clock the unit runs on
-- resets: The reset line for v3d, if not using a mapping of the bridge
- See bindings/reset/reset.txt
-
-v3d {
- compatible = "brcm,7268-v3d";
- reg = <0xf1204000 0x100>,
- <0xf1200000 0x4000>,
- <0xf1208000 0x4000>,
- <0xf1204100 0x100>;
- reg-names = "bridge", "hub", "core0", "gca";
- interrupts = <0 78 4>,
- <0 77 4>;
-};
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
new file mode 100644
index 0000000..a2b06d42
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom V3D GPU Bindings
+
+maintainers:
+ - Eric Anholt <eric@xxxxxxxxxx>
+ - Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
+
+properties:
+ $nodename:
+ pattern: '^gpu@[a-f0-9]+$'
+
+ compatible:
+ enum:
+ - brcm,7268-v3d
+ - brcm,7278-v3d
+
+ reg:
+ items:
+ - description: hub register
+ - description: core0 register
+ - description: GCA cache controller register (if GCA controller)
+ - description: bridge register (if no external reset controller)
+ minItems: 2
+ maxItems: 4
+
+ reg-names:
+ items:
+ enum: [ bridge, core0, gca, hub ]
+ minItems: 2
+ maxItems: 4
+
+ interrupts:
+ items:
+ - description: hub interrupt
+ - description: core interrupt (if it doesn't share the hub's interrupt)
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ gpu@f1200000 {
+ compatible = "brcm,7268-v3d";
+ reg = <0xf1204000 0x100>,
+ <0xf1200000 0x4000>,
+ <0xf1208000 0x4000>,
+ <0xf1204100 0x100>;
+ reg-names = "bridge", "hub", "core0", "gca";
+ interrupts = <0 78 4>,
+ <0 77 4>;
+ };
+
+...
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
