Hi Laurent, On Tue, 2020-12-22 at 09:36 +0200, Laurent Pinchart wrote: > Hi Liu, > > Thank you for the patch. > > On Thu, Dec 17, 2020 at 05:59:30PM +0800, Liu Ying wrote: > > This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). > > > > Signed-off-by: Liu Ying <victor.liu@xxxxxxx> > > --- > > .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 185 +++++++++++++++++++++ > > 1 file changed, 185 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > new file mode 100644 > > index 00000000..4e5ff6f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > @@ -0,0 +1,185 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Ffsl%2Cimx8qxp-ldb.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C8548efc7a1cd47907a7f08d8a64c5570%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637442194086922596%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=ejDrgwOktws%2BdElmBSyvKLws1Kx3YvPSfFDFghvpnaI%3D&reserved=0 > > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C8548efc7a1cd47907a7f08d8a64c5570%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637442194086922596%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=lM09SU3NM5A3ogCzoOMowF%2FCdIOQrQO%2Fhoy2kUQZqYg%3D&reserved=0 > > + > > +title: Freescale i.MX8qm/qxp LVDS Display Bridge > > + > > +maintainers: > > + - Liu Ying <victor.liu@xxxxxxx> > > + > > +description: | > > + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. > > + > > + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color > > + format and can map the input to VESA or JEIDA standards. The two channels > > + cannot be used simultaneously, that is to say, the user should pick one of > > + them to use. Two LDB channels from two LDB instances can work together in > > + LDB split mode to support a dual link LVDS display. The channel indexes > > + have to be different. Channel0 outputs odd pixels and channel1 outputs > > + even pixels. > > In this case, does the display controller output odd pixels and even > pixels separately to the two LVDS channels, with each channel > effectively be a separate LVDS encoder ? Could you give an example of DT The display controller just outputs frames without odd/even pixels concept. The frames reach two LDBs through pixel combiner, display pixel link and PXL2DPI. Each LDB would split out odd/even pixels and just use either odd pixels or even pixels. > integration for dual-link LVDS support, with the display controller, two > LDB instances, and a dual-link LVDS panel ? https://pastebin.ubuntu.com/p/HmzxV6PpvH/ Liu Ying > > > + > > + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel > > + input color format. The two channels can be used simultaneously, either > > + in dual mode or split mode. In dual mode, the two channels output identical > > + data. In split mode, channel0 outputs odd pixels and channel1 outputs even > > + pixels. > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8qm-ldb > > + - fsl,imx8qxp-ldb > > + > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > + clocks: > > + items: > > + - description: pixel clock > > + - description: bypass clock > > + > > + clock-names: > > + items: > > + - const: pixel > > + - const: bypass > > + > > + power-domains: > > + maxItems: 1 > > + > > + fsl,syscon: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: | > > + A phandle which points to Control and Status Registers(CSR) module. > > + > > + fsl,companion-ldb: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: | > > + A phandle which points to companion LDB which is used in LDB split mode. > > + > > +patternProperties: > > + "^channel@[0-1]$": > > + type: object > > + description: Represents a channel of LDB. > > + > > + properties: > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > + reg: > > + description: The channel index. > > + enum: [ 0, 1 ] > > + > > + phys: > > + description: A phandle to the phy module representing the LVDS PHY. > > + maxItems: 1 > > + > > + phy-names: > > + const: lvds_phy > > + > > + port@0: > > + type: object > > + description: Input port of the channel. > > + > > + properties: > > + reg: > > + const: 0 > > + > > + required: > > + - reg > > + > > + port@1: > > + type: object > > + description: Output port of the channel. > > + > > + properties: > > + reg: > > + const: 1 > > + > > + required: > > + - reg > > + > > + required: > > + - "#address-cells" > > + - "#size-cells" > > + - reg > > + - phys > > + - phy-names > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - "#address-cells" > > + - "#size-cells" > > + - clocks > > + - clock-names > > + - power-domains > > + - fsl,syscon > > + - channel@0 > > + - channel@1 > > + > > +allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: fsl,imx8qm-ldb > > + then: > > + properties: > > + fsl,companion-ldb: false > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/firmware/imx/rsrc.h> > > + ldb { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "fsl,imx8qxp-ldb"; > > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, > > + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; > > + clock-names = "pixel", "bypass"; > > + power-domains = <&pd IMX_SC_R_LVDS_0>; > > + fsl,syscon = <&mipi_lvds_0_csr>; > > + > > + channel@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + phys = <&mipi_lvds_0_phy>; > > + phy-names = "lvds_phy"; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; > > + }; > > + }; > > + }; > > + > > + channel@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + phys = <&mipi_lvds_0_phy>; > > + phy-names = "lvds_phy"; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; > > + }; > > + }; > > + }; > > + }; _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
