Re: [PATCH 04/14] dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding

[Rob Herring <robh@xxxxxxxxxx>]

On Thu, Dec 17, 2020 at 05:59:23PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp pixel combiner.
> 
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
>  .../display/bridge/fsl,imx8qxp-pixel-combiner.yaml | 160 +++++++++++++++++++++
>  1 file changed, 160 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
> new file mode 100644
> index 00000000..bacacd8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
> @@ -0,0 +1,160 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp Pixel Combiner
> +
> +maintainers:
> +  - Liu Ying <victor.liu@xxxxxxx>
> +
> +description: |
> +  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
> +  single display controller and manipulates the two streams to support a number
> +  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
> +  either one screen, two screens, or virtual screens.  The pixel combiner is
> +  also responsible for generating some of the control signals for the pixel link
> +  output channel.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8qm-pixel-combiner
> +      - fsl,imx8qxp-pixel-combiner
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: apb
> +
> +  power-domains:
> +    maxItems: 1
> +
> +patternProperties:
> +  "^channel@[0-1]$":
> +    type: object
> +    description: Represents a display stream of pixel combiner.
> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      reg:
> +        description: The display stream index.
> +        oneOf:
> +          - const: 0
> +          - const: 1

enum: [ 0, 1 ]

> +
> +      port@0:
> +        type: object
> +        description: Input endpoint of the display stream.
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +        required:
> +          - reg

You can drop 'reg' parts. That's going to get covered by the graph 
schema.

> +
> +      port@1:
> +        type: object
> +        description: Output endpoint of the display stream.
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +        required:
> +          - reg
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"
> +      - reg
> +      - port@0
> +      - port@1
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - reg
> +  - clocks
> +  - clock-names
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8-lpcg.h>
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +    pixel-combiner@56020000 {
> +        compatible = "fsl,imx8qxp-pixel-combiner";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        reg = <0x56020000 0x10000>;
> +        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
> +        clock-names = "apb";
> +        power-domains = <&pd IMX_SC_R_DC_0>;
> +
> +        channel@0 {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            reg = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
> +                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
> +                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
> +                };
> +            };
> +        };
> +
> +        channel@1 {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            reg = <1>;
> +
> +            port@0 {
> +                reg = <0>;
> +
> +                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
> +                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +
> +                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
> +                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.7.4
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel