RE: [PATCH v7 04/15] drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal@xxxxxxxxx>
> Sent: Friday, December 18, 2020 4:07 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx; Shankar, Uma <uma.shankar@xxxxxxxxx>;
> airlied@xxxxxxxx; jani.nikula@xxxxxxxxxxxxxxx; ville.syrjala@xxxxxxxxxxxxxxx;
> Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; Sharma, Swati2
> <swati2.sharma@xxxxxxxxx>
> Subject: [PATCH v7 04/15] drm/dp_helper: Add Helpers for FRL Link Training
> support for DP-HDMI2.1 PCON
> 
> This patch adds support for configuring a PCON device, connected as a DP
> branched device to enable FRL Link training with a HDMI2.1 + sink.
> 
> v2: Fixed typos and addressed other review comments from Uma Shankar.
> -changed the commit message for better clarity (Uma Shankar) -removed
> unnecessary argument supplied to a drm helper function.
> -fixed return value for max frl read from pcon.
> 
> v3: Removed DPCD 0x3035 for MAX Sink FRL b/w as per new version of spec.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
> Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx> (v2)

Changes look good, you can keep the RB.

>  drivers/gpu/drm/drm_dp_helper.c | 263 ++++++++++++++++++++++++++++++++
>  include/drm/drm_dp_helper.h     |  70 +++++++++
>  2 files changed, 333 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_dp_helper.c
> b/drivers/gpu/drm/drm_dp_helper.c index 5bd0934004e3..f501e3890921 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -2596,3 +2596,266 @@ void drm_dp_vsc_sdp_log(const char *level, struct
> device *dev,  #undef DP_SDP_LOG  }  EXPORT_SYMBOL(drm_dp_vsc_sdp_log);
> +
> +/**
> + * drm_dp_get_pcon_max_frl_bw() - maximum frl supported by PCON
> + * @dpcd: DisplayPort configuration data
> + * @port_cap: port capabilities
> + *
> + * Returns maximum frl bandwidth supported by PCON in GBPS,
> + * returns 0 if not supported.
> + */
> +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> +			       const u8 port_cap[4])
> +{
> +	int bw;
> +	u8 buf;
> +
> +	buf = port_cap[2];
> +	bw = buf & DP_PCON_MAX_FRL_BW;
> +
> +	switch (bw) {
> +	case DP_PCON_MAX_9GBPS:
> +		return 9;
> +	case DP_PCON_MAX_18GBPS:
> +		return 18;
> +	case DP_PCON_MAX_24GBPS:
> +		return 24;
> +	case DP_PCON_MAX_32GBPS:
> +		return 32;
> +	case DP_PCON_MAX_40GBPS:
> +		return 40;
> +	case DP_PCON_MAX_48GBPS:
> +		return 48;
> +	case DP_PCON_MAX_0GBPS:
> +	default:
> +		return 0;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_get_pcon_max_frl_bw);
> +
> +/**
> + * drm_dp_pcon_frl_prepare() - Prepare PCON for FRL.
> + * @aux: DisplayPort AUX channel
> + *
> + * Returns 0 if success, else returns negative error code.
> + */
> +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool
> +enable_frl_ready_hpd) {
> +	int ret;
> +	u8 buf = DP_PCON_ENABLE_SOURCE_CTL_MODE |
> +		 DP_PCON_ENABLE_LINK_FRL_MODE;
> +
> +	if (enable_frl_ready_hpd)
> +		buf |= DP_PCON_ENABLE_HPD_READY;
> +
> +	ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_frl_prepare);
> +
> +/**
> + * drm_dp_pcon_is_frl_ready() - Is PCON ready for FRL
> + * @aux: DisplayPort AUX channel
> + *
> + * Returns true if success, else returns false.
> + */
> +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux) {
> +	int ret;
> +	u8 buf;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf);
> +	if (ret < 0)
> +		return false;
> +
> +	if (buf & DP_PCON_FRL_READY)
> +		return true;
> +
> +	return false;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_is_frl_ready);
> +
> +/**
> + * drm_dp_pcon_frl_configure_1() - Set HDMI LINK Configuration-Step1
> + * @aux: DisplayPort AUX channel
> + * @max_frl_gbps: maximum frl bw to be configured between PCON and HDMI
> +sink
> + * @concurrent_mode: true if concurrent mode or operation is required,
> + * false otherwise.
> + *
> + * Returns 0 if success, else returns negative error code.
> + */
> +
> +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
> +				bool concurrent_mode)
> +{
> +	int ret;
> +	u8 buf;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (concurrent_mode)
> +		buf |= DP_PCON_ENABLE_CONCURRENT_LINK;
> +	else
> +		buf &= ~DP_PCON_ENABLE_CONCURRENT_LINK;
> +
> +	switch (max_frl_gbps) {
> +	case 9:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_9GBPS;
> +		break;
> +	case 18:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_18GBPS;
> +		break;
> +	case 24:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_24GBPS;
> +		break;
> +	case 32:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_32GBPS;
> +		break;
> +	case 40:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_40GBPS;
> +		break;
> +	case 48:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_48GBPS;
> +		break;
> +	case 0:
> +		buf |=  DP_PCON_ENABLE_MAX_BW_0GBPS;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1);
> +
> +/**
> + * drm_dp_pcon_frl_configure_2() - Set HDMI Link configuration Step-2
> + * @aux: DisplayPort AUX channel
> + * @max_frl_mask : Max FRL BW to be tried by the PCON with HDMI Sink
> + * @extended_train_mode : true for Extended Mode, false for Normal Mode.
> + * In Normal mode, the PCON tries each frl bw from the max_frl_mask
> +starting
> + * from min, and stops when link training is successful. In Extended
> +mode, all
> + * frl bw selected in the mask are trained by the PCON.
> + *
> + * Returns 0 if success, else returns negative error code.
> + */
> +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
> +				bool extended_train_mode)
> +{
> +	int ret;
> +	u8 buf = max_frl_mask;
> +
> +	if (extended_train_mode)
> +		buf |= DP_PCON_FRL_LINK_TRAIN_EXTENDED;
> +
> +	ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_frl_configure_2);
> +
> +/**
> + * drm_dp_pcon_reset_frl_config() - Re-Set HDMI Link configuration.
> + * @aux: DisplayPort AUX channel
> + *
> + * Returns 0 if success, else returns negative error code.
> + */
> +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux) {
> +	int ret;
> +
> +	ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, 0x0);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_reset_frl_config);
> +
> +/**
> + * drm_dp_pcon_frl_enable() - Enable HDMI link through FRL
> + * @aux: DisplayPort AUX channel
> + *
> + * Returns 0 if success, else returns negative error code.
> + */
> +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux) {
> +	int ret;
> +	u8 buf = 0;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf);
> +	if (ret < 0)
> +		return ret;
> +	if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) {
> +		DRM_DEBUG_KMS("PCON in Autonomous mode, can't enable
> FRL\n");
> +		return -EINVAL;
> +	}
> +	buf |= DP_PCON_ENABLE_HDMI_LINK;
> +	ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_1, buf);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_frl_enable);
> +
> +/**
> + * drm_dp_pcon_hdmi_link_active() - check if the PCON HDMI LINK status is
> active.
> + * @aux: DisplayPort AUX channel
> + *
> + * Returns true if link is active else returns false.
> + */
> +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux) {
> +	u8 buf;
> +	int ret;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_TX_LINK_STATUS, &buf);
> +	if (ret < 0)
> +		return false;
> +
> +	return buf & DP_PCON_HDMI_TX_LINK_ACTIVE; }
> +EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_active);
> +
> +/**
> + * drm_dp_pcon_hdmi_link_mode() - get the PCON HDMI LINK MODE
> + * @aux: DisplayPort AUX channel
> + * @frl_trained_mask: pointer to store bitmask of the trained bw configuration.
> + * Valid only if the MODE returned is FRL. For Normal Link training
> +mode
> + * only 1 of the bits will be set, but in case of Extended mode, more
> +than
> + * one bits can be set.
> + *
> + * Returns the link mode : TMDS or FRL on success, else returns
> +negative error
> + * code.
> + */
> +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8
> +*frl_trained_mask) {
> +	u8 buf;
> +	int mode;
> +	int ret;
> +
> +	ret = drm_dp_dpcd_readb(aux, DP_PCON_HDMI_POST_FRL_STATUS,
> &buf);
> +	if (ret < 0)
> +		return ret;
> +
> +	mode = buf & DP_PCON_HDMI_LINK_MODE;
> +
> +	if (frl_trained_mask && DP_PCON_HDMI_MODE_FRL == mode)
> +		*frl_trained_mask = (buf & DP_PCON_HDMI_FRL_TRAINED_BW)
> >> 1;
> +
> +	return mode;
> +}
> +EXPORT_SYMBOL(drm_dp_pcon_hdmi_link_mode);
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index
> 6b40258927bf..c66f570eadc2 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -411,6 +411,17 @@ struct drm_device;
>  # define DP_DS_10BPC		            1
>  # define DP_DS_12BPC		            2
>  # define DP_DS_16BPC		            3
> +/* HDMI2.1 PCON FRL CONFIGURATION */
> +# define DP_PCON_MAX_FRL_BW                 (7 << 2)
> +# define DP_PCON_MAX_0GBPS                  (0 << 2)
> +# define DP_PCON_MAX_9GBPS                  (1 << 2)
> +# define DP_PCON_MAX_18GBPS                 (2 << 2)
> +# define DP_PCON_MAX_24GBPS                 (3 << 2)
> +# define DP_PCON_MAX_32GBPS                 (4 << 2)
> +# define DP_PCON_MAX_40GBPS                 (5 << 2)
> +# define DP_PCON_MAX_48GBPS                 (6 << 2)
> +# define DP_PCON_SOURCE_CTL_MODE            (1 << 5)
> +
>  /* offset 3 for DVI */
>  # define DP_DS_DVI_DUAL_LINK		    (1 << 1)
>  # define DP_DS_DVI_HIGH_COLOR_DEPTH	    (1 << 2)
> @@ -1054,6 +1065,51 @@ struct drm_device;
>  #define DP_CEC_TX_MESSAGE_BUFFER               0x3020
>  #define DP_CEC_MESSAGE_BUFFER_LENGTH             0x10
> 
> +/* PCON CONFIGURE-1 FRL FOR HDMI SINK */
> +#define DP_PCON_HDMI_LINK_CONFIG_1             0x305A
> +# define DP_PCON_ENABLE_MAX_FRL_BW             (7 << 0)
> +# define DP_PCON_ENABLE_MAX_BW_0GBPS	       0
> +# define DP_PCON_ENABLE_MAX_BW_9GBPS	       1
> +# define DP_PCON_ENABLE_MAX_BW_18GBPS	       2
> +# define DP_PCON_ENABLE_MAX_BW_24GBPS	       3
> +# define DP_PCON_ENABLE_MAX_BW_32GBPS	       4
> +# define DP_PCON_ENABLE_MAX_BW_40GBPS	       5
> +# define DP_PCON_ENABLE_MAX_BW_48GBPS	       6
> +# define DP_PCON_ENABLE_SOURCE_CTL_MODE       (1 << 3)
> +# define DP_PCON_ENABLE_CONCURRENT_LINK       (1 << 4)
> +# define DP_PCON_ENABLE_LINK_FRL_MODE         (1 << 5)
> +# define DP_PCON_ENABLE_HPD_READY	      (1 << 6)
> +# define DP_PCON_ENABLE_HDMI_LINK             (1 << 7)
> +
> +/* PCON CONFIGURE-2 FRL FOR HDMI SINK */
> +#define DP_PCON_HDMI_LINK_CONFIG_2            0x305B
> +# define DP_PCON_MAX_LINK_BW_MASK             (0x3F << 0)
> +# define DP_PCON_FRL_BW_MASK_9GBPS            (1 << 0)
> +# define DP_PCON_FRL_BW_MASK_18GBPS           (1 << 1)
> +# define DP_PCON_FRL_BW_MASK_24GBPS           (1 << 2)
> +# define DP_PCON_FRL_BW_MASK_32GBPS           (1 << 3)
> +# define DP_PCON_FRL_BW_MASK_40GBPS           (1 << 4)
> +# define DP_PCON_FRL_BW_MASK_48GBPS           (1 << 5)
> +# define DP_PCON_FRL_LINK_TRAIN_EXTENDED      (1 << 6)
> +
> +/* PCON HDMI LINK STATUS */
> +#define DP_PCON_HDMI_TX_LINK_STATUS           0x303B
> +# define DP_PCON_HDMI_TX_LINK_ACTIVE          (1 << 0)
> +# define DP_PCON_FRL_READY		      (1 << 1)
> +
> +/* PCON HDMI POST FRL STATUS */
> +#define DP_PCON_HDMI_POST_FRL_STATUS          0x3036
> +# define DP_PCON_HDMI_LINK_MODE               (1 << 0)
> +# define DP_PCON_HDMI_MODE_TMDS               0
> +# define DP_PCON_HDMI_MODE_FRL                1
> +# define DP_PCON_HDMI_FRL_TRAINED_BW          (0x3F << 1)
> +# define DP_PCON_FRL_TRAINED_BW_9GBPS	      (1 << 1)
> +# define DP_PCON_FRL_TRAINED_BW_18GBPS	      (1 << 2)
> +# define DP_PCON_FRL_TRAINED_BW_24GBPS	      (1 << 3)
> +# define DP_PCON_FRL_TRAINED_BW_32GBPS	      (1 << 4)
> +# define DP_PCON_FRL_TRAINED_BW_40GBPS	      (1 << 5)
> +# define DP_PCON_FRL_TRAINED_BW_48GBPS	      (1 << 6)
> +
>  #define DP_PROTOCOL_CONVERTER_CONTROL_0		0x3050 /* DP 1.3
> */
>  # define DP_HDMI_DVI_OUTPUT_CONFIG		(1 << 0) /* DP 1.3 */
>  #define DP_PROTOCOL_CONVERTER_CONTROL_1		0x3051 /* DP 1.3
> */
> @@ -1967,4 +2023,18 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux
> *aux,
>  				struct drm_dp_phy_test_params *data);  int
> drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux,
>  				struct drm_dp_phy_test_params *data, u8
> dp_rev);
> +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> +			       const u8 port_cap[4]);
> +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool
> +enable_frl_ready_hpd); bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux
> +*aux); int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int
> max_frl_gbps,
> +				bool concurrent_mode);
> +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
> +				bool extended_train_mode);
> +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); int
> +drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);
> +
> +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); int
> +drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8
> +*frl_trained_mask);
> +
>  #endif /* _DRM_DP_HELPER_H_ */
> --
> 2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux