Re: [PATCH 3/4] dt-bindings: phy: mixel: mipi-dsi-phy: Add Mixel combo PHY support for i.MX8qxp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Liu,
Since we now gain optional properties validation would become even more
useful. Could you look into converting to YAML before adding more
values?
Cheers,
 -- Guido

On Fri, Dec 04, 2020 at 03:33:43PM +0800, Liu Ying wrote:
> Add support for Mixel MIPI DPHY + LVDS PHY combo IP
> as found on Freescale i.MX8qxp SoC.
> 
> Cc: Guido Günther <agx@xxxxxxxxxxx>
> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> index 9b23407..0afce99 100644
> --- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> @@ -4,9 +4,13 @@ The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
>  MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
>  electrical signals for DSI.
>  
> +The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work
> +in either MIPI-DSI PHY mode or LVDS PHY mode.
> +
>  Required properties:
> -- compatible: Must be:
> +- compatible: Should be one of:
>    - "fsl,imx8mq-mipi-dphy"
> +  - "fsl,imx8qxp-mipi-dphy"
>  - clocks: Must contain an entry for each entry in clock-names.
>  - clock-names: Must contain the following entries:
>    - "phy_ref": phandle and specifier referring to the DPHY ref clock
> @@ -14,6 +18,8 @@ Required properties:
>  - #phy-cells: number of cells in PHY, as defined in
>    Documentation/devicetree/bindings/phy/phy-bindings.txt
>    this must be <0>
> +- fsl,syscon: Phandle to a system controller, as required by the PHY
> +  in i.MX8qxp SoC.
>  
>  Optional properties:
>  - power-domains: phandle to power domain
> -- 
> 2.7.4
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux