The DSI clocks setup function has been using an array to store the clock
name of either the DSI0 or DSI1 blocks, using the port ID to choose the
proper one.
Let's switch to an snprintf call to do the same thing and simplify the
array a bit.
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index bb316e6cc12b..f704d959e65b 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -1398,12 +1398,12 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi *dsi)
struct device *dev = &dsi->pdev->dev;
const char *parent_name = __clk_get_name(dsi->pll_phy_clock);
static const struct {
- const char *dsi0_name, *dsi1_name;
+ const char *name;
int div;
} phy_clocks[] = {
- { "dsi0_byte", "dsi1_byte", 8 },
- { "dsi0_ddr2", "dsi1_ddr2", 4 },
- { "dsi0_ddr", "dsi1_ddr", 2 },
+ { "byte", 8 },
+ { "ddr2", 4 },
+ { "ddr", 2 },
};
int i;
@@ -1419,8 +1419,12 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi *dsi)
for (i = 0; i < ARRAY_SIZE(phy_clocks); i++) {
struct clk_fixed_factor *fix = &dsi->phy_clocks[i];
struct clk_init_data init;
+ char clk_name[16];
int ret;
+ snprintf(clk_name, sizeof(clk_name),
+ "dsi%u_%s", dsi->port, phy_clocks[i].name);
+
/* We just use core fixed factor clock ops for the PHY
* clocks. The clocks are actually gated by the
* PHY_AFEC0_DDRCLK_EN bits, which we should be
@@ -1437,10 +1441,7 @@ vc4_dsi_init_phy_clocks(struct vc4_dsi *dsi)
memset(&init, 0, sizeof(init));
init.parent_names = &parent_name;
init.num_parents = 1;
- if (dsi->port == 1)
- init.name = phy_clocks[i].dsi1_name;
- else
- init.name = phy_clocks[i].dsi0_name;
+ init.name = clk_name;
init.ops = &clk_fixed_factor_ops;
ret = devm_clk_hw_register(dev, &fix->hw);
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
