On Wednesday 18 Nov 2020 at 12:03:57 (+0000), Lukasz Luba wrote:
> Remove old power model and use new Energy Model to calculate the power
> budget. It drops static + dynamic power calculations and power table
> in order to use Energy Model performance domain data. This model
> should be easy to use and could find more users. It is also less
> complicated to setup the needed structures.
>
> Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx>
> ---
> drivers/thermal/devfreq_cooling.c | 302 ++++++++++--------------------
> include/linux/devfreq_cooling.h | 17 --
> 2 files changed, 96 insertions(+), 223 deletions(-)
>
> diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
> index b354271742c5..28754ad46b96 100644
> --- a/drivers/thermal/devfreq_cooling.c
> +++ b/drivers/thermal/devfreq_cooling.c
> @@ -33,20 +33,17 @@ static DEFINE_IDA(devfreq_ida);
> * @cdev: Pointer to associated thermal cooling device.
> * @devfreq: Pointer to associated devfreq device.
> * @cooling_state: Current cooling state.
> - * @power_table: Pointer to table with maximum power draw for each
> - * cooling state. State is the index into the table, and
> - * the power is in mW.
> * @freq_table: Pointer to a table with the frequencies sorted in descending
> * order. You can index the table by cooling device state
> - * @freq_table_size: Size of the @freq_table and @power_table
> - * @power_ops: Pointer to devfreq_cooling_power, used to generate the
> - * @power_table.
> + * @max_state: It is the last index, that is, one less than the number of the
> + * OPPs
> + * @power_ops: Pointer to devfreq_cooling_power, a more precised model.
> * @res_util: Resource utilization scaling factor for the power.
> * It is multiplied by 100 to minimize the error. It is used
> * for estimation of the power budget instead of using
> - * 'utilization' (which is 'busy_time / 'total_time').
> - * The 'res_util' range is from 100 to (power_table[state] * 100)
> - * for the corresponding 'state'.
> + * 'utilization' (which is 'busy_time' / 'total_time').
> + * The 'res_util' range is from 100 to power * 100 for the
> + * corresponding 'state'.
> * @capped_state: index to cooling state with in dynamic power budget
> * @req_max_freq: PM QoS request for limiting the maximum frequency
> * of the devfreq device.
> @@ -58,9 +55,8 @@ struct devfreq_cooling_device {
> struct thermal_cooling_device *cdev;
> struct devfreq *devfreq;
> unsigned long cooling_state;
> - u32 *power_table;
> u32 *freq_table;
> - size_t freq_table_size;
> + size_t max_state;
> struct devfreq_cooling_power *power_ops;
> u32 res_util;
> int capped_state;
> @@ -74,7 +70,7 @@ static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
> {
> struct devfreq_cooling_device *dfc = cdev->devdata;
>
> - *state = dfc->freq_table_size - 1;
> + *state = dfc->max_state;
>
> return 0;
> }
> @@ -96,16 +92,22 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> struct devfreq *df = dfc->devfreq;
> struct device *dev = df->dev.parent;
> unsigned long freq;
> + int perf_idx;
>
> if (state == dfc->cooling_state)
> return 0;
>
> dev_dbg(dev, "Setting cooling state %lu\n", state);
>
> - if (state >= dfc->freq_table_size)
> + if (state > dfc->max_state)
> return -EINVAL;
>
> - freq = dfc->freq_table[state];
> + if (dfc->em) {
> + perf_idx = dfc->max_state - state;
> + freq = dfc->em->table[perf_idx].frequency * 1000;
> + } else {
> + freq = dfc->freq_table[state];
> + }
>
> dev_pm_qos_update_request(&dfc->req_max_freq,
> DIV_ROUND_UP(freq, HZ_PER_KHZ));
> @@ -116,24 +118,24 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> }
>
> /**
> - * freq_get_state() - get the cooling state corresponding to a frequency
> + * get_perf_idx() - get the performance index corresponding to a frequency
> * @dfc: Pointer to devfreq cooling device
> - * @freq: frequency in Hz
> + * @freq: frequency in kHz
> *
> - * Return: the cooling state associated with the @freq, or
> - * THERMAL_CSTATE_INVALID if it wasn't found.
> + * Return: the performance index associated with the @freq, or
> + * -EINVAL if it wasn't found.
> */
> -static unsigned long
> -freq_get_state(struct devfreq_cooling_device *dfc, unsigned long freq)
> +static int get_perf_idx(struct devfreq_cooling_device *dfc, unsigned long freq)
> {
> + struct em_perf_domain *em = dfc->em;
> int i;
>
> - for (i = 0; i < dfc->freq_table_size; i++) {
> - if (dfc->freq_table[i] == freq)
> + for (i = 0; i < em->nr_perf_states; i++) {
> + if (em->table[i].frequency == freq)
> return i;
> }
>
> - return THERMAL_CSTATE_INVALID;
> + return -EINVAL;
> }
>
> static unsigned long get_voltage(struct devfreq *df, unsigned long freq)
> @@ -164,71 +166,15 @@ static unsigned long get_voltage(struct devfreq *df, unsigned long freq)
> return voltage;
> }
>
> -/**
> - * get_static_power() - calculate the static power
> - * @dfc: Pointer to devfreq cooling device
> - * @freq: Frequency in Hz
> - *
> - * Calculate the static power in milliwatts using the supplied
> - * get_static_power(). The current voltage is calculated using the
> - * OPP library. If no get_static_power() was supplied, assume the
> - * static power is negligible.
> - */
> -static unsigned long
> -get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq)
> -{
> - struct devfreq *df = dfc->devfreq;
> - unsigned long voltage;
> -
> - if (!dfc->power_ops->get_static_power)
> - return 0;
> -
> - voltage = get_voltage(df, freq);
> -
> - if (voltage == 0)
> - return 0;
> -
> - return dfc->power_ops->get_static_power(df, voltage);
> -}
> -
> -/**
> - * get_dynamic_power - calculate the dynamic power
> - * @dfc: Pointer to devfreq cooling device
> - * @freq: Frequency in Hz
> - * @voltage: Voltage in millivolts
> - *
> - * Calculate the dynamic power in milliwatts consumed by the device at
> - * frequency @freq and voltage @voltage. If the get_dynamic_power()
> - * was supplied as part of the devfreq_cooling_power struct, then that
> - * function is used. Otherwise, a simple power model (Pdyn = Coeff *
> - * Voltage^2 * Frequency) is used.
> - */
> -static unsigned long
> -get_dynamic_power(struct devfreq_cooling_device *dfc, unsigned long freq,
> - unsigned long voltage)
> +static void dfc_em_get_requested_power(struct em_perf_domain *em,
> + struct devfreq_dev_status *status,
> + u32 *power, int perf_idx)
> {
> - u64 power;
> - u32 freq_mhz;
> - struct devfreq_cooling_power *dfc_power = dfc->power_ops;
> -
> - if (dfc_power->get_dynamic_power)
> - return dfc_power->get_dynamic_power(dfc->devfreq, freq,
> - voltage);
> + *power = em->table[perf_idx].power;
>
> - freq_mhz = freq / 1000000;
> - power = (u64)dfc_power->dyn_power_coeff * freq_mhz * voltage * voltage;
> - do_div(power, 1000000000);
> -
> - return power;
> -}
> -
> -
> -static inline unsigned long get_total_power(struct devfreq_cooling_device *dfc,
> - unsigned long freq,
> - unsigned long voltage)
> -{
> - return get_static_power(dfc, freq) + get_dynamic_power(dfc, freq,
> - voltage);
> + /* Scale power for utilization */
> + *power *= status->busy_time;
> + *power /= status->total_time;
> }
Nit: Reiterating my question on whether it's worth having this
additional function or whether its contents should be collapsed into the
single caller.
>
> static void _normalize_load(struct devfreq_dev_status *status)
> @@ -259,9 +205,7 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
> unsigned long state;
> unsigned long freq;
> unsigned long voltage;
> - u32 dyn_power = 0;
> - u32 static_power = 0;
> - int res;
> + int res, perf_idx;
>
> mutex_lock(&df->lock);
> res = df->profile->get_dev_status(df->dev.parent, &status);
> @@ -271,13 +215,7 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
>
> freq = status.current_frequency;
>
> - state = freq_get_state(dfc, freq);
> - if (state == THERMAL_CSTATE_INVALID) {
> - res = -EAGAIN;
> - goto fail;
> - }
> -
> - if (dfc->power_ops->get_real_power) {
> + if (dfc->power_ops && dfc->power_ops->get_real_power) {
> voltage = get_voltage(df, freq);
> if (voltage == 0) {
> res = -EINVAL;
> @@ -287,7 +225,7 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
> res = dfc->power_ops->get_real_power(df, power, freq, voltage);
> if (!res) {
> state = dfc->capped_state;
> - dfc->res_util = dfc->power_table[state];
> + dfc->res_util = dfc->em->table[state].power;
> dfc->res_util *= SCALE_ERROR_MITIGATION;
>
> if (*power > 1)
> @@ -296,17 +234,15 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
> goto fail;
> }
> } else {
> - dyn_power = dfc->power_table[state];
> + /* Energy Model frequencies are in kHz */
> + perf_idx = get_perf_idx(dfc, freq / 1000);
> + if (perf_idx < 0) {
> + res = -EAGAIN;
> + goto fail;
> + }
>
> _normalize_load(&status);
> -
> - /* Scale dynamic power for utilization */
> - dyn_power *= status.busy_time;
> - dyn_power /= status.total_time;
> - /* Get static power */
> - static_power = get_static_power(dfc, freq);
> -
> - *power = dyn_power + static_power;
> + dfc_em_get_requested_power(dfc->em, &status, power, perf_idx);
> }
>
> trace_thermal_power_devfreq_get_power(cdev, &status, freq, *power);
> @@ -319,20 +255,17 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
> }
>
> static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev,
> - unsigned long state,
> - u32 *power)
> + unsigned long state, u32 *power)
> {
> struct devfreq_cooling_device *dfc = cdev->devdata;
> - unsigned long freq;
> - u32 static_power;
> + int perf_idx;
>
> - if (state >= dfc->freq_table_size)
> + if (state > dfc->max_state)
> return -EINVAL;
>
> - freq = dfc->freq_table[state];
> - static_power = get_static_power(dfc, freq);
> + perf_idx = dfc->max_state - state;
> + *power = dfc->em->table[perf_idx].power;
>
> - *power = dfc->power_table[state] + static_power;
> return 0;
> }
>
> @@ -342,10 +275,7 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
> struct devfreq_cooling_device *dfc = cdev->devdata;
> struct devfreq *df = dfc->devfreq;
> struct devfreq_dev_status status;
> - unsigned long busy_time;
> unsigned long freq;
> - s32 dyn_power;
> - u32 static_power;
> s32 est_power;
> int i;
>
> @@ -355,31 +285,27 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
>
> freq = status.current_frequency;
>
> - if (dfc->power_ops->get_real_power) {
> + if (dfc->power_ops && dfc->power_ops->get_real_power) {
> /* Scale for resource utilization */
> est_power = power * dfc->res_util;
> est_power /= SCALE_ERROR_MITIGATION;
> } else {
> - static_power = get_static_power(dfc, freq);
> -
> - dyn_power = power - static_power;
> - dyn_power = dyn_power > 0 ? dyn_power : 0;
> -
> - /* Scale dynamic power for utilization */
> - busy_time = status.busy_time ?: 1;
> - est_power = (dyn_power * status.total_time) / busy_time;
> + _normalize_load(&status);
> + est_power = power * status.total_time;
> + est_power /= status.busy_time;
> }
>
> /*
> * Find the first cooling state that is within the power
> - * budget for dynamic power.
> + * budget. The EM power table is sorted ascending.
> */
> - for (i = 0; i < dfc->freq_table_size - 1; i++)
> - if (est_power >= dfc->power_table[i])
> + for (i = dfc->max_state; i > 0; i--)
> + if (est_power >= dfc->em->table[i].power)
> break;
>
> - *state = i;
> - dfc->capped_state = i;
> + *state = dfc->max_state - i;
> + dfc->capped_state = *state;
> +
> trace_thermal_power_devfreq_limit(cdev, freq, *state, power);
> return 0;
> }
> @@ -391,91 +317,43 @@ static struct thermal_cooling_device_ops devfreq_cooling_ops = {
> };
>
> /**
> - * devfreq_cooling_gen_tables() - Generate power and freq tables.
> - * @dfc: Pointer to devfreq cooling device.
> - *
> - * Generate power and frequency tables: the power table hold the
> - * device's maximum power usage at each cooling state (OPP). The
> - * static and dynamic power using the appropriate voltage and
> - * frequency for the state, is acquired from the struct
> - * devfreq_cooling_power, and summed to make the maximum power draw.
> + * devfreq_cooling_gen_tables() - Generate frequency table.
> + * @dfc: Pointer to devfreq cooling device.
> + * @num_opps: Number of OPPs
> *
> - * The frequency table holds the frequencies in descending order.
> - * That way its indexed by cooling device state.
> - *
> - * The tables are malloced, and pointers put in dfc. They must be
> - * freed when unregistering the devfreq cooling device.
> + * Generate frequency table which holds the frequencies in descending
> + * order. That way its indexed by cooling device state. This is for
> + * compatibility with drivers which do not register Energy Model.
> *
> * Return: 0 on success, negative error code on failure.
> */
> -static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc)
> +static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc,
> + int num_opps)
> {
> struct devfreq *df = dfc->devfreq;
> struct device *dev = df->dev.parent;
> - int ret, num_opps;
> unsigned long freq;
> - u32 *power_table = NULL;
> - u32 *freq_table;
> int i;
>
> - num_opps = dev_pm_opp_get_opp_count(dev);
> -
> - if (dfc->power_ops) {
> - power_table = kcalloc(num_opps, sizeof(*power_table),
> - GFP_KERNEL);
> - if (!power_table)
> - return -ENOMEM;
> - }
> -
> - freq_table = kcalloc(num_opps, sizeof(*freq_table),
> + dfc->freq_table = kcalloc(num_opps, sizeof(*dfc->freq_table),
> GFP_KERNEL);
> - if (!freq_table) {
> - ret = -ENOMEM;
> - goto free_power_table;
> - }
> + if (!dfc->freq_table)
> + return -ENOMEM;
>
> for (i = 0, freq = ULONG_MAX; i < num_opps; i++, freq--) {
> - unsigned long power, voltage;
> struct dev_pm_opp *opp;
>
> opp = dev_pm_opp_find_freq_floor(dev, &freq);
> if (IS_ERR(opp)) {
> - ret = PTR_ERR(opp);
> - goto free_tables;
> + kfree(dfc->freq_table);
> + return PTR_ERR(opp);
> }
>
> - voltage = dev_pm_opp_get_voltage(opp) / 1000; /* mV */
> dev_pm_opp_put(opp);
> -
> - if (dfc->power_ops) {
> - if (dfc->power_ops->get_real_power)
> - power = get_total_power(dfc, freq, voltage);
> - else
> - power = get_dynamic_power(dfc, freq, voltage);
> -
> - dev_dbg(dev, "Power table: %lu MHz @ %lu mV: %lu = %lu mW\n",
> - freq / 1000000, voltage, power, power);
> -
> - power_table[i] = power;
> - }
> -
> - freq_table[i] = freq;
> + dfc->freq_table[i] = freq;
> }
>
> - if (dfc->power_ops)
> - dfc->power_table = power_table;
> -
> - dfc->freq_table = freq_table;
> - dfc->freq_table_size = num_opps;
> -
> return 0;
> -
> -free_tables:
> - kfree(freq_table);
> -free_power_table:
> - kfree(power_table);
> -
> - return ret;
> }
>
> /**
> @@ -500,7 +378,7 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
> struct thermal_cooling_device *cdev;
> struct devfreq_cooling_device *dfc;
> char dev_name[THERMAL_NAME_LENGTH];
> - int err;
> + int err, num_opps;
>
> dfc = kzalloc(sizeof(*dfc), GFP_KERNEL);
> if (!dfc)
> @@ -508,28 +386,45 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
>
> dfc->devfreq = df;
>
> - if (dfc_power) {
> - dfc->power_ops = dfc_power;
> -
> + dfc->em = em_pd_get(df->dev.parent);
> + if (dfc->em) {
> devfreq_cooling_ops.get_requested_power =
> devfreq_cooling_get_requested_power;
> devfreq_cooling_ops.state2power = devfreq_cooling_state2power;
> devfreq_cooling_ops.power2state = devfreq_cooling_power2state;
> +
> + dfc->power_ops = dfc_power;
> +
> + num_opps = em_pd_nr_perf_states(dfc->em);
> + } else {
> + /* Backward compatibility for drivers which do not use IPA */
> + dev_dbg(df->dev.parent, "missing EM for cooling device\n");
> +
> + num_opps = dev_pm_opp_get_opp_count(df->dev.parent);
> +
> + err = devfreq_cooling_gen_tables(dfc, num_opps);
> + if (err)
> + goto free_dfc;
> }
>
> - err = devfreq_cooling_gen_tables(dfc);
> - if (err)
> + if (num_opps <= 0) {
> + err = -EINVAL;
> goto free_dfc;
> + }
> +
> + /* max_state is an index, not a counter */
> + dfc->max_state = num_opps - 1;
>
> err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq,
> DEV_PM_QOS_MAX_FREQUENCY,
> PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
> if (err < 0)
> - goto free_tables;
> + goto free_table;
>
> err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
> if (err < 0)
> goto remove_qos_req;
> +
> dfc->id = err;
>
> snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d", dfc->id);
> @@ -550,12 +445,9 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
>
> release_ida:
> ida_simple_remove(&devfreq_ida, dfc->id);
> -
> remove_qos_req:
> dev_pm_qos_remove_request(&dfc->req_max_freq);
> -
> -free_tables:
> - kfree(dfc->power_table);
> +free_table:
> kfree(dfc->freq_table);
> free_dfc:
> kfree(dfc);
> @@ -696,9 +588,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
> if (dfc->em_registered)
> em_dev_unregister_perf_domain(dev);
>
> - kfree(dfc->power_table);
> kfree(dfc->freq_table);
> -
> kfree(dfc);
> }
> EXPORT_SYMBOL_GPL(devfreq_cooling_unregister);
> diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h
> index 19868fb922f1..4890b12b54b4 100644
> --- a/include/linux/devfreq_cooling.h
> +++ b/include/linux/devfreq_cooling.h
> @@ -17,17 +17,6 @@
>
> /**
> * struct devfreq_cooling_power - Devfreq cooling power ops
> - * @get_static_power: Take voltage, in mV, and return the static power
> - * in mW. If NULL, the static power is assumed
> - * to be 0.
> - * @get_dynamic_power: Take voltage, in mV, and frequency, in HZ, and
> - * return the dynamic power draw in mW. If NULL,
> - * a simple power model is used.
> - * @dyn_power_coeff: Coefficient for the simple dynamic power model in
> - * mW/(MHz mV mV).
> - * If get_dynamic_power() is NULL, then the
> - * dynamic power is calculated as
> - * @dyn_power_coeff * frequency * voltage^2
> * @get_real_power: When this is set, the framework uses it to ask the
> * device driver for the actual power.
> * Some devices have more sophisticated methods
> @@ -47,14 +36,8 @@
> * max total (static + dynamic) power value for each OPP.
> */
> struct devfreq_cooling_power {
> - unsigned long (*get_static_power)(struct devfreq *devfreq,
> - unsigned long voltage);
> - unsigned long (*get_dynamic_power)(struct devfreq *devfreq,
> - unsigned long freq,
> - unsigned long voltage);
> int (*get_real_power)(struct devfreq *df, u32 *power,
> unsigned long freq, unsigned long voltage);
> - unsigned long dyn_power_coeff;
> };
>
> #ifdef CONFIG_DEVFREQ_THERMAL
> --
> 2.17.1
>
Reviewed-by: Ionela Voinescu <ionela.voinescu@xxxxxxx>
Thanks,
Ionela.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
