On 11:45-20201130, Laurent Pinchart wrote:
> Hi Nikhil,
>
> Thank you for the patch.
>
> On Thu, Nov 19, 2020 at 09:31:32PM +0530, Nikhil Devshatwar wrote:
> > Remove the old code to iterate over the bridge chain, as this is
> > already done by the framework.
> > The bridge state should have the negotiated bus format and flags.
> > Use these from the bridge's state.
> > If the bridge does not support format negotiation, error out
> > and fail.
> >
> > Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
> > Reviewed-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> > ---
> >
> > Notes:
> > changes from v2:
> > * Remove the old code and use the flags from the bridge state
> >
> > drivers/gpu/drm/tidss/tidss_encoder.c | 36 +++++++++++----------------
> > 1 file changed, 14 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/tidss/tidss_encoder.c b/drivers/gpu/drm/tidss/tidss_encoder.c
> > index e278a9c89476..08d5083c5508 100644
> > --- a/drivers/gpu/drm/tidss/tidss_encoder.c
> > +++ b/drivers/gpu/drm/tidss/tidss_encoder.c
> > @@ -21,37 +21,29 @@ static int tidss_encoder_atomic_check(struct drm_encoder *encoder,
> > {
> > struct drm_device *ddev = encoder->dev;
> > struct tidss_crtc_state *tcrtc_state = to_tidss_crtc_state(crtc_state);
> > - struct drm_display_info *di = &conn_state->connector->display_info;
> > + struct drm_bridge_state *bstate;
> > struct drm_bridge *bridge;
> > - bool bus_flags_set = false;
> >
> > dev_dbg(ddev->dev, "%s\n", __func__);
> >
> > - /*
> > - * Take the bus_flags from the first bridge that defines
> > - * bridge timings, or from the connector's display_info if no
> > - * bridge defines the timings.
> > - */
> > - drm_for_each_bridge_in_chain(encoder, bridge) {
> > - if (!bridge->timings)
> > - continue;
> > -
> > - tcrtc_state->bus_flags = bridge->timings->input_bus_flags;
> > - bus_flags_set = true;
> > - break;
> > + /* Copy the bus_format and flags from the first bridge's state */
> > + bridge = drm_bridge_chain_get_first_bridge(encoder);
> > + bstate = drm_atomic_get_new_bridge_state(crtc_state->state, bridge);
> > + if (bstate) {
> > + tcrtc_state->bus_format = bstate->input_bus_cfg.format;
> > + tcrtc_state->bus_flags = bstate->input_bus_cfg.flags;
> > + } else {
> > + dev_err(ddev->dev, "Could not get the bridge state\n");
> > + return -EINVAL;
> > }
>
> I'd write this
>
> bstate = drm_atomic_get_new_bridge_state(crtc_state->state, bridge);
> if (!bstate) {
> dev_err(ddev->dev, "Could not get the bridge state\n");
> return -EINVAL;
> }
>
> tcrtc_state->bus_format = bstate->input_bus_cfg.format;
> tcrtc_state->bus_flags = bstate->input_bus_cfg.flags;
Looks better this way. I'll update
Nikhil Devshatwar
> >
> > - if (!di->bus_formats || di->num_bus_formats == 0) {
> > - dev_err(ddev->dev, "%s: No bus_formats in connected display\n",
> > - __func__);
> > + if (tcrtc_state->bus_format == 0 ||
> > + tcrtc_state->bus_format == MEDIA_BUS_FMT_FIXED) {
> > +
> > + dev_err(ddev->dev, "Bridge connected to the encoder did not specify media bus format\n");
> > return -EINVAL;
> > }
> >
> > - // XXX any cleaner way to set bus format and flags?
> > - tcrtc_state->bus_format = di->bus_formats[0];
> > - if (!bus_flags_set)
> > - tcrtc_state->bus_flags = di->bus_flags;
> > -
> > return 0;
> > }
> >
>
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
