On Thu, Nov 26, 2020 at 8:43 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> Fixes the following W=1 kernel build warning(s):
>
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:128: warning: Function parameter or member 'hwmgr' not described in 'vega10_fan_ctrl_set_static_mode'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:128: warning: Function parameter or member 'mode' not described in 'vega10_fan_ctrl_set_static_mode'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:157: warning: Function parameter or member 'hwmgr' not described in 'vega10_fan_ctrl_set_default_mode'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:176: warning: Cannot understand * @fn vega10_enable_fan_control_feature
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:252: warning: Function parameter or member 'hwmgr' not described in 'vega10_fan_ctrl_set_fan_speed_percent'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:252: warning: Function parameter or member 'speed' not described in 'vega10_fan_ctrl_set_fan_speed_percent'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:290: warning: Function parameter or member 'hwmgr' not described in 'vega10_fan_ctrl_reset_fan_speed_to_default'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:307: warning: Function parameter or member 'hwmgr' not described in 'vega10_fan_ctrl_set_fan_speed_rpm'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:307: warning: Function parameter or member 'speed' not described in 'vega10_fan_ctrl_set_fan_speed_rpm'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:339: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_get_temperature'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:365: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_set_temperature_range'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:365: warning: Function parameter or member 'range' not described in 'vega10_thermal_set_temperature_range'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:414: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_initialize'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:437: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_enable_alert'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:468: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_disable_alert'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:496: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_stop_thermal_controller'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:515: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_setup_fan_table'
> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_thermal.c:618: warning: Function parameter or member 'hwmgr' not described in 'vega10_thermal_start_smc_fan_control'
>
> Cc: Evan Quan <evan.quan@xxxxxxx>
> Cc: Alex Deucher <alexander.deucher@xxxxxxx>
> Cc: "Christian König" <christian.koenig@xxxxxxx>
> Cc: David Airlie <airlied@xxxxxxxx>
> Cc: Daniel Vetter <daniel@xxxxxxxx>
> Cc: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Applied. Thanks!
Alex
> ---
> .../amd/pm/powerplay/hwmgr/vega10_thermal.c | 131 ++++++++----------
> 1 file changed, 61 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
> index 952cd3d7240e3..9b46b27bd30c4 100644
> --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
> +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
> @@ -118,12 +118,12 @@ int vega10_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
> }
>
> /**
> -* Set Fan Speed Control to static mode,
> -* so that the user can decide what speed to use.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
> -* @exception Should always succeed.
> -*/
> + * vega10_fan_ctrl_set_static_mode - Set Fan Speed Control to static mode,
> + * so that the user can decide what speed to use.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * @mode: the fan control mode, 0 default, 1 by percent, 5, by RPM
> + * Exception: Should always succeed.
> + */
> int vega10_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -149,10 +149,10 @@ int vega10_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
> }
>
> /**
> -* Reset Fan Speed Control to default mode.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* @exception Should always succeed.
> -*/
> + * vega10_fan_ctrl_set_default_mode - Reset Fan Speed Control to default mode.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * Exception: Should always succeed.
> + */
> int vega10_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -173,11 +173,10 @@ int vega10_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
> }
>
> /**
> - * @fn vega10_enable_fan_control_feature
> - * @brief Enables the SMC Fan Control Feature.
> + * vega10_enable_fan_control_feature - Enables the SMC Fan Control Feature.
> *
> - * @param hwmgr - the address of the powerplay hardware manager.
> - * @return 0 on success. -1 otherwise.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * Return: 0 on success. -1 otherwise.
> */
> static int vega10_enable_fan_control_feature(struct pp_hwmgr *hwmgr)
> {
> @@ -242,11 +241,11 @@ int vega10_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Set Fan Speed in percent.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* @param speed is the percentage value (0% - 100%) to be set.
> -* @exception Fails is the 100% setting appears to be 0.
> -*/
> + * vega10_fan_ctrl_set_fan_speed_percent - Set Fan Speed in percent.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * @speed: is the percentage value (0% - 100%) to be set.
> + * Exception: Fails is the 100% setting appears to be 0.
> + */
> int vega10_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
> uint32_t speed)
> {
> @@ -282,10 +281,10 @@ int vega10_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
> }
>
> /**
> -* Reset Fan Speed to default.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* @exception Always succeeds.
> -*/
> + * vega10_fan_ctrl_reset_fan_speed_to_default - Reset Fan Speed to default.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * Exception: Always succeeds.
> + */
> int vega10_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
> {
> if (hwmgr->thermal_controller.fanInfo.bNoFan)
> @@ -298,11 +297,11 @@ int vega10_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Set Fan Speed in RPM.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* @param speed is the percentage value (min - max) to be set.
> -* @exception Fails is the speed not lie between min and max.
> -*/
> + * vega10_fan_ctrl_set_fan_speed_rpm - Set Fan Speed in RPM.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * @speed: is the percentage value (min - max) to be set.
> + * Exception: Fails is the speed not lie between min and max.
> + */
> int vega10_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -331,10 +330,10 @@ int vega10_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
> }
>
> /**
> -* Reads the remote temperature from the SIslands thermal controller.
> -*
> -* @param hwmgr The address of the hardware manager.
> -*/
> + * vega10_thermal_get_temperature - Reads the remote temperature from the SIslands thermal controller.
> + *
> + * @hwmgr: The address of the hardware manager.
> + */
> int vega10_thermal_get_temperature(struct pp_hwmgr *hwmgr)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -353,13 +352,13 @@ int vega10_thermal_get_temperature(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Set the requested temperature range for high and low alert signals
> -*
> -* @param hwmgr The address of the hardware manager.
> -* @param range Temperature range to be programmed for
> -* high and low alert signals
> -* @exception PP_Result_BadInput if the input data is not valid.
> -*/
> + * vega10_thermal_set_temperature_range - Set the requested temperature range for high and low alert signals
> + *
> + * @hwmgr: The address of the hardware manager.
> + * @range: Temperature range to be programmed for
> + * high and low alert signals
> + * Exception: PP_Result_BadInput if the input data is not valid.
> + */
> static int vega10_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
> struct PP_TemperatureRange *range)
> {
> @@ -406,10 +405,10 @@ static int vega10_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
> }
>
> /**
> -* Programs thermal controller one-time setting registers
> -*
> -* @param hwmgr The address of the hardware manager.
> -*/
> + * vega10_thermal_initialize - Programs thermal controller one-time setting registers
> + *
> + * @hwmgr: The address of the hardware manager.
> + */
> static int vega10_thermal_initialize(struct pp_hwmgr *hwmgr)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -429,10 +428,10 @@ static int vega10_thermal_initialize(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Enable thermal alerts on the RV770 thermal controller.
> -*
> -* @param hwmgr The address of the hardware manager.
> -*/
> + * vega10_thermal_enable_alert - Enable thermal alerts on the RV770 thermal controller.
> + *
> + * @hwmgr: The address of the hardware manager.
> + */
> static int vega10_thermal_enable_alert(struct pp_hwmgr *hwmgr)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -461,9 +460,9 @@ static int vega10_thermal_enable_alert(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Disable thermal alerts on the RV770 thermal controller.
> -* @param hwmgr The address of the hardware manager.
> -*/
> + * vega10_thermal_disable_alert - Disable thermal alerts on the RV770 thermal controller.
> + * @hwmgr: The address of the hardware manager.
> + */
> int vega10_thermal_disable_alert(struct pp_hwmgr *hwmgr)
> {
> struct amdgpu_device *adev = hwmgr->adev;
> @@ -488,10 +487,10 @@ int vega10_thermal_disable_alert(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Uninitialize the thermal controller.
> -* Currently just disables alerts.
> -* @param hwmgr The address of the hardware manager.
> -*/
> + * vega10_thermal_stop_thermal_controller - Uninitialize the thermal controller.
> + * Currently just disables alerts.
> + * @hwmgr: The address of the hardware manager.
> + */
> int vega10_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
> {
> int result = vega10_thermal_disable_alert(hwmgr);
> @@ -503,14 +502,10 @@ int vega10_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Set up the fan table to control the fan using the SMC.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* @param pInput the pointer to input data
> -* @param pOutput the pointer to output data
> -* @param pStorage the pointer to temporary storage
> -* @param Result the last failure code
> -* @return result from set temperature range routine
> -*/
> + * vega10_thermal_setup_fan_table - Set up the fan table to control the fan using the SMC.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * Return: result from set temperature range routine
> + */
> static int vega10_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
> {
> int ret;
> @@ -606,14 +601,10 @@ int vega10_enable_mgpu_fan_boost(struct pp_hwmgr *hwmgr)
> }
>
> /**
> -* Start the fan control on the SMC.
> -* @param hwmgr the address of the powerplay hardware manager.
> -* @param pInput the pointer to input data
> -* @param pOutput the pointer to output data
> -* @param pStorage the pointer to temporary storage
> -* @param Result the last failure code
> -* @return result from set temperature range routine
> -*/
> + * vega10_thermal_start_smc_fan_control - Start the fan control on the SMC.
> + * @hwmgr: the address of the powerplay hardware manager.
> + * Return: result from set temperature range routine
> + */
> static int vega10_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr)
> {
> /* If the fantable setup has failed we could have disabled
> --
> 2.25.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
