Add DP support to display-connector driver. The driver will support HPD
via a GPIO and DP PWR.
DP PWR will be enabled at probe, which is not optimal, but I'm not sure
what would be a good place to enable and disable DP PWR. Perhaps
attach/detach, but I don't know if enabling HW is something that attach
is supposed to do.
In any case, I don't think there's much difference in power consumption
between the version in this patch and enabling the regulator later: if
the driver probes, supposedly it will attach very soon afterwards, and
we need to enable the DP PWR as soon as possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/display-connector.c | 46 +++++++++++++++++++++-
1 file changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c
index 4d278573cdb9..05eb759da6fc 100644
--- a/drivers/gpu/drm/bridge/display-connector.c
+++ b/drivers/gpu/drm/bridge/display-connector.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <drm/drm_bridge.h>
#include <drm/drm_edid.h>
@@ -20,6 +21,8 @@ struct display_connector {
struct gpio_desc *hpd_gpio;
int hpd_irq;
+
+ struct regulator *dp_pwr;
};
static inline struct display_connector *
@@ -172,11 +175,12 @@ static int display_connector_probe(struct platform_device *pdev)
of_property_read_string(pdev->dev.of_node, "label", &label);
/*
- * Get the HPD GPIO for DVI and HDMI connectors. If the GPIO can provide
+ * Get the HPD GPIO for DVI, HDMI and DP connectors. If the GPIO can provide
* edge interrupts, register an interrupt handler.
*/
if (type == DRM_MODE_CONNECTOR_DVII ||
- type == DRM_MODE_CONNECTOR_HDMIA) {
+ type == DRM_MODE_CONNECTOR_HDMIA ||
+ type == DRM_MODE_CONNECTOR_DisplayPort) {
conn->hpd_gpio = devm_gpiod_get_optional(&pdev->dev, "hpd",
GPIOD_IN);
if (IS_ERR(conn->hpd_gpio)) {
@@ -223,6 +227,38 @@ static int display_connector_probe(struct platform_device *pdev)
}
}
+ /* Get the DP PWR for DP connector. */
+ if (type == DRM_MODE_CONNECTOR_DisplayPort) {
+ int ret;
+
+ conn->dp_pwr = devm_regulator_get_optional(&pdev->dev, "dp-pwr");
+
+ if (IS_ERR(conn->dp_pwr)) {
+ ret = PTR_ERR(conn->dp_pwr);
+
+ switch (ret) {
+ case -ENODEV:
+ conn->dp_pwr = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ return -EPROBE_DEFER;
+
+ default:
+ dev_err(&pdev->dev, "failed to get DP PWR regulator: %d\n", ret);
+ return ret;
+ }
+ }
+
+ if (conn->dp_pwr) {
+ ret = regulator_enable(conn->dp_pwr);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable DP PWR regulator: %d\n", ret);
+ return ret;
+ }
+ }
+ }
+
conn->bridge.funcs = &display_connector_bridge_funcs;
conn->bridge.of_node = pdev->dev.of_node;
@@ -251,6 +287,9 @@ static int display_connector_remove(struct platform_device *pdev)
{
struct display_connector *conn = platform_get_drvdata(pdev);
+ if (conn->dp_pwr)
+ regulator_disable(conn->dp_pwr);
+
drm_bridge_remove(&conn->bridge);
if (!IS_ERR(conn->bridge.ddc))
@@ -275,6 +314,9 @@ static const struct of_device_id display_connector_match[] = {
}, {
.compatible = "vga-connector",
.data = (void *)DRM_MODE_CONNECTOR_VGA,
+ }, {
+ .compatible = "dp-connector",
+ .data = (void *)DRM_MODE_CONNECTOR_DisplayPort,
},
{},
};
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
