Hi, Chunfeng: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> 於 2020年11月18日 週三 下午4:21寫道: > > Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml > > Cc: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > --- > v3: new patch > --- > .../display/mediatek/mediatek,dsi.txt | 18 +--- > .../bindings/phy/mediatek,dsi-phy.yaml | 83 +++++++++++++++++++ > 2 files changed, 84 insertions(+), 17 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt > index f06f24d405a5..8238a86686be 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt > @@ -22,23 +22,7 @@ Required properties: > MIPI TX Configuration Module > ============================ > > -The MIPI TX configuration module controls the MIPI D-PHY. > - > -Required properties: > -- compatible: "mediatek,<chip>-mipi-tx" > -- the supported chips are mt2701, 7623, mt8173 and mt8183. > -- reg: Physical base address and length of the controller's registers > -- clocks: PLL reference clock > -- clock-output-names: name of the output clock line to the DSI encoder > -- #clock-cells: must be <0>; > -- #phy-cells: must be <0>. > - > -Optional properties: > -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And > - the step is 200. > -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If > - unspecified default values shall be used. > -- nvmem-cell-names: Should be "calibration-data" > +See phy/mediatek,dsi-phy.yaml > > Example: > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > new file mode 100644 > index 000000000000..87f8df251ab0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > @@ -0,0 +1,83 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2020 MediaTek > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding > + > +maintainers: > + - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> > + - Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> Please add Philipp Zabel because he is Mediatek DRM driver maintainer. DRM DRIVERS FOR MEDIATEK M: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> M: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> L: dri-devel@xxxxxxxxxxxxxxxxxxxxx S: Supported F: Documentation/devicetree/bindings/display/mediatek/ > + > +description: The MIPI DSI PHY supports up to 4-lane output. > + > +properties: > + $nodename: > + pattern: "^dsi-phy@[0-9a-f]+$" > + > + compatible: > + enum: > + - mediatek,mt2701-mipi-tx > + - mediatek,mt7623-mipi-tx > + - mediatek,mt8173-mipi-tx Add mediatek,mt8183-mipi-tx Regards, Chun-Kuang. > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: PLL reference clock > + > + clock-output-names: > + maxItems: 1 > + > + "#phy-cells": > + const: 0 > + > + "#clock-cells": > + const: 0 > + > + nvmem-cells: > + maxItems: 1 > + description: A phandle to the calibration data provided by a nvmem device, > + if unspecified, default values shall be used. > + > + nvmem-cell-names: > + items: > + - const: calibration-data > + > + drive-strength-microamp: > + description: adjust driving current, the step is 200. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 2000 > + maximum: 6000 > + default: 4600 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-output-names > + - "#phy-cells" > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt8173-clk.h> > + dsi-phy@10215000 { > + compatible = "mediatek,mt8173-mipi-tx"; > + reg = <0x10215000 0x1000>; > + clocks = <&clk26m>; > + clock-output-names = "mipi_tx0_pll"; > + drive-strength-microamp = <4000>; > + nvmem-cells= <&mipi_tx_calibration>; > + nvmem-cell-names = "calibration-data"; > + #clock-cells = <0>; > + #phy-cells = <0>; > + }; > + > +... > -- > 2.18.0 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel