On Wed, 18 Nov 2020 16:21:16 +0800, Chunfeng Yun wrote: > Convert usb-device.txt to YAML schema usb-device.yaml > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > --- > v3: > 1. remove $nodenmae and items key word for compatilbe; > 2. add additionalProperties; > > The followings are suggested by Rob: > 3. merge the following patch > [v2,1/4] dt-bindings: usb: convert usb-device.txt to YAML schema > [v2,2/4] dt-bindings: usb: add properties for hard wired devices > 4. define the unit-address for hard-wired device in usb-hcd.yaml, > also define its 'reg' and 'compatible'; > 5. This series is base on Serge's series: > https://patchwork.kernel.org/project/linux-usb/cover/20201111090853.14112-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ > [v4,00/18] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema > > v2 changes suggested by Rob: > 1. modify pattern to support any USB class > 2. convert usb-device.txt into usb-device.yaml > --- > .../devicetree/bindings/usb/usb-device.txt | 102 -------------- > .../devicetree/bindings/usb/usb-device.yaml | 125 ++++++++++++++++++ > .../devicetree/bindings/usb/usb-hcd.yaml | 33 +++++ > 3 files changed, 158 insertions(+), 102 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt > create mode 100644 Documentation/devicetree/bindings/usb/usb-device.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.example.dt.yaml: usb: #size-cells:0:0: 0 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.example.dt.yaml: usb: dwc3@34000000:compatible:0: 'snps,dwc3' does not match '^usb[0-9a-f]+,[0-9a-f]+$' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: #address-cells:0:0: 1 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: #size-cells:0:0: 0 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: dwc3@a600000:compatible:0: 'snps,dwc3' does not match '^usb[0-9a-f]+,[0-9a-f]+$' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: #size-cells:0:0: 0 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: usb@ff400000:compatible:0: 'amlogic,meson-g12a-usb' does not match '^usb[0-9a-f]+,[0-9a-f]+$' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: usb@ff400000:compatible: ['amlogic,meson-g12a-usb', 'snps,dwc2'] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: usb@ff400000:compatible: Additional items are not allowed ('snps,dwc2' was unexpected) From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: usb@ff500000:compatible:0: 'snps,dwc3' does not match '^usb[0-9a-f]+,[0-9a-f]+$' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.example.dt.yaml: usb-controller: phy@0: 'compatible' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.example.dt.yaml: usb-controller: phy@1: 'compatible' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.example.dt.yaml: usb-controller: phy@2: 'compatible' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.example.dt.yaml: usb-glue@65b00000: #size-cells:0:0: 0 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.example.dt.yaml: usb-glue@65b00000: ss-phy@300:compatible:0: 'socionext,uniphier-ld20-usb3-ssphy' does not match '^usb[0-9a-f]+,[0-9a-f]+$' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.example.dt.yaml: usb-glue@65b00000: #size-cells:0:0: 0 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.example.dt.yaml: usb-glue@65b00000: hs-phy@200:compatible:0: 'socionext,uniphier-ld20-usb3-hsphy' does not match '^usb[0-9a-f]+,[0-9a-f]+$' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml See https://patchwork.ozlabs.org/patch/1402017 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
