[PATCH v1 2/6] drm/panel: mantix: Tweak init sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We've seen some (non permanent) burn in and bad white balance
on some of the panels. Adding this bit from a vendor supplied
sequence fixes it.

Fixes: 72967d5616d3 ("drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel")
Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index 0c5f22e95c2d..624d17b96a69 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -22,6 +22,7 @@
 /* Manufacturer specific Commands send via DSI */
 #define MANTIX_CMD_OTP_STOP_RELOAD_MIPI 0x41
 #define MANTIX_CMD_INT_CANCEL           0x4C
+#define MANTIX_CMD_SPI_FINISH           0x90
 
 struct mantix {
 	struct device *dev;
@@ -66,6 +67,10 @@ static int mantix_init_sequence(struct mantix *ctx)
 	dsi_generic_write_seq(dsi, 0x80, 0x64, 0x00, 0x64, 0x00, 0x00);
 	msleep(20);
 
+	dsi_generic_write_seq(dsi, MANTIX_CMD_SPI_FINISH, 0xA5);
+	dsi_generic_write_seq(dsi, MANTIX_CMD_OTP_STOP_RELOAD_MIPI, 0x00, 0x2F);
+	msleep(20);
+
 	dev_dbg(dev, "Panel init sequence done\n");
 	return 0;
 }
-- 
2.29.2

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux