Hi Rob, Thank you for the patch. On Mon, Nov 16, 2020 at 07:37:03PM -0600, Rob Herring wrote: > Now that we have a graph schema, rework the display related schemas to use > it. Mostly this is adding a reference to graph.yaml and dropping duplicate > parts from schemas. > > Cc: Thierry Reding <thierry.reding@xxxxxxxxx> > Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> > Cc: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > Cc: Maxime Ripard <mripard@xxxxxxxxxx> > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx> > Cc: Thomas Zimmermann <tzimmermann@xxxxxxx> > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > graph.yaml is in the dtschema repo, so this can go into drm-misc and > hopefully anything afterwards be fixed up to use graph.yaml. > > .../allwinner,sun4i-a10-display-backend.yaml | 14 +--- > .../allwinner,sun4i-a10-display-frontend.yaml | 16 +---- > .../display/allwinner,sun4i-a10-hdmi.yaml | 16 +---- > .../display/allwinner,sun4i-a10-tcon.yaml | 16 +---- > .../allwinner,sun4i-a10-tv-encoder.yaml | 2 +- > .../display/allwinner,sun6i-a31-drc.yaml | 16 +---- > .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 6 +- > .../allwinner,sun8i-a83t-de2-mixer.yaml | 16 +---- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 16 +---- > .../display/allwinner,sun8i-r40-tcon-top.yaml | 19 +----- > .../display/allwinner,sun9i-a80-deu.yaml | 16 +---- > .../bindings/display/brcm,bcm2835-dpi.yaml | 7 +- > .../display/bridge/analogix,anx7625.yaml | 5 +- > .../display/bridge/analogix,anx7814.yaml | 18 +---- > .../bindings/display/bridge/anx6345.yaml | 15 ++-- > .../display/bridge/cdns,mhdp8546.yaml | 18 +---- > .../display/bridge/chrontel,ch7033.yaml | 3 + > .../display/bridge/intel,keembay-dsi.yaml | 9 +-- > .../bindings/display/bridge/ite,it6505.yaml | 2 +- > .../display/bridge/lontium,lt9611.yaml | 68 ++----------------- > .../bindings/display/bridge/lvds-codec.yaml | 15 +--- > .../bindings/display/bridge/nwl-dsi.yaml | 17 +---- > .../bindings/display/bridge/ps8640.yaml | 21 ++---- > .../bindings/display/bridge/renesas,lvds.yaml | 15 +--- > .../display/bridge/simple-bridge.yaml | 15 +--- > .../display/bridge/snps,dw-mipi-dsi.yaml | 5 +- > .../display/bridge/thine,thc63lvd1024.yaml | 16 +---- > .../bindings/display/bridge/ti,sn65dsi86.yaml | 27 +------- > .../bindings/display/bridge/ti,tfp410.yaml | 15 +--- > .../display/bridge/toshiba,tc358762.yaml | 51 ++------------ > .../display/bridge/toshiba,tc358768.yaml | 11 +-- > .../display/bridge/toshiba,tc358775.yaml | 17 ++--- > .../connector/analog-tv-connector.yaml | 1 + > .../display/connector/dvi-connector.yaml | 1 + > .../display/connector/hdmi-connector.yaml | 1 + > .../display/connector/vga-connector.yaml | 1 + > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 2 +- > .../bindings/display/ingenic,lcd.yaml | 7 +- > .../display/intel,keembay-display.yaml | 2 +- > .../display/panel/advantech,idk-2121wr.yaml | 5 ++ > .../bindings/display/panel/panel-common.yaml | 11 +-- > .../rockchip/rockchip,rk3066-hdmi.yaml | 13 +--- > .../display/rockchip/rockchip-vop.yaml | 5 +- > .../bindings/display/st,stm32-dsi.yaml | 13 ++-- > .../bindings/display/st,stm32-ltdc.yaml | 7 +- > .../bindings/display/ti/ti,am65x-dss.yaml | 16 +---- > .../bindings/display/ti/ti,j721e-dss.yaml | 18 +---- > .../bindings/display/ti/ti,k2g-dss.yaml | 4 +- > 48 files changed, 121 insertions(+), 509 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml > index 86057d541065..7e8798b43c2a 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml > @@ -85,17 +85,9 @@ properties: > > ports: > type: object Do we need to specify the type here (and in all the locations below), give that it's specified in /schemas/graph.yaml#/properties/ports ? > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > type: object > description: | > @@ -107,12 +99,10 @@ properties: > Output endpoints of the controller. > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml > index 3eb1c2bbf4e7..005a550d7226 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml > @@ -58,33 +58,21 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. > > port@1: > - type: object > description: | > Output endpoints of the controller. > > required: > - - "#address-cells" > - - "#size-cells" > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml > index 75e6479397a5..2c2a582300b7 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml > @@ -77,35 +77,23 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. > > port@1: > - type: object > description: | > Output endpoints of the controller. Usually an HDMI > connector. > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml > index 4c15a2644a7c..ce1065b46ef9 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml > @@ -116,24 +116,14 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. > > port@1: > - type: object > description: | > Output endpoints of the controller. > > @@ -159,12 +149,10 @@ properties: > unevaluatedProperties: true > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml > index 6009324be967..9885839df5eb 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml > @@ -24,7 +24,7 @@ properties: > maxItems: 1 > > port: > - type: object > + $ref: /schemas/graph.yaml#/properties/port > description: > A port node with endpoint definitions as defined in > Documentation/devicetree/bindings/media/video-interfaces.txt. The > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml > index 0c1ce55940e1..287681fcde72 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml > @@ -47,34 +47,22 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. > > port@1: > - type: object > description: | > Output endpoints of the controller. > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml > index 7aa330dabc44..a738d7c12a97 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml > @@ -47,11 +47,9 @@ properties: > const: dphy > > port: > - type: object > + $ref: /schemas/graph.yaml#/properties/port > description: > - A port node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. That > - port should be the input endpoint, usually coming from the > + The port should be the input endpoint, usually coming from the > associated TCON. > > required: > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml > index c040eef56518..269e26681b2f 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml > @@ -44,33 +44,21 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. > > port@1: > - type: object > description: | > Output endpoints of the controller. > > required: > - - "#address-cells" > - - "#size-cells" > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > index fa4769a0b26e..37ec88d52099 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > @@ -94,36 +94,24 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. Usually the associated > TCON. > > port@1: > - type: object > description: | > Output endpoints of the controller. Usually an HDMI > connector. > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml > index b98ca609824b..ef6974510590 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml > @@ -81,21 +81,10 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > - All ports should have only one endpoint connected to > - remote endpoint. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoint for Mixer 0 mux. > > @@ -132,7 +121,6 @@ properties: > additionalProperties: false > > port@2: > - type: object > description: | > Input endpoint for Mixer 1 mux. > > @@ -201,19 +189,16 @@ properties: > additionalProperties: false > > port@5: > - type: object > description: | > Output endpoint for HDMI mux > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > - port@4 > - port@5 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - "#clock-cells" > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml > index 96de41d32b3e..112f9b93fe8d 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml > @@ -41,34 +41,22 @@ properties: > > ports: > type: object > - description: | > - A ports node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: | > Input endpoints of the controller. > > port@1: > - type: object > description: | > Output endpoints of the controller. > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml > index 5c1024bbc1b3..c9ad0ecc9b6d 100644 > --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml > +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml > @@ -27,10 +27,9 @@ properties: > - const: pixel > > port: > - type: object > - description: > > - Port node with a single endpoint connecting to the panel, as > - defined in Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Port node with a single endpoint connecting to the panel. > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > index 60585a4fc22b..b99cc1f028be 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -35,16 +35,15 @@ properties: > maxItems: 1 > > ports: > + $ref: /schemas/graph.yaml#/properties/ports > type: object This is my OCD speaking, assuming we need to keep the type, $ref is after type in most other locations (there are a few other occurrences below). > > properties: > port@0: > - type: object > description: > Video port for MIPI DSI input. > > port@1: > - type: object > description: > Video port for panel or connector. > > @@ -52,6 +51,8 @@ properties: > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml > index 3ba477aefdd7..ae1c01d85c7e 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml > @@ -43,34 +43,22 @@ properties: > > ports: > type: object > - description: > - A node containing input and output port nodes with endpoint > - definitions as documented in > - Documentation/devicetree/bindings/media/video-interfaces.txt > - Documentation/devicetree/bindings/graph.txt > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > port@0: > - type: object > description: Video port for HDMI input. > > - properties: > - reg: > - const: 0 > - > port@1: > - type: object > description: > Video port for SlimPort, DisplayPort, eDP or MyDP output. > > - properties: > - reg: > - const: 1 > - > required: > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > index 8c0e4f285fbc..9eaa680d98bc 100644 > --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml > @@ -35,29 +35,22 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > - > port@0: > - type: object > - description: | > + description: > Video port for LVTTL input > > port@1: > - type: object > - description: | > + description: > Video port for eDP output (panel or connector). > May be omitted if EDID works reliably. > > required: > - port@0 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > index 74d675fc6e7b..d197bae48c8a 100644 > --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml > @@ -58,46 +58,34 @@ properties: > > ports: > type: object > - description: > - Ports as described in Documentation/devicetree/bindings/graph.txt. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > - > port@0: > - type: object > description: > First input port representing the DP bridge input. > > port@1: > - type: object > description: > Second input port representing the DP bridge input. > > port@2: > - type: object > description: > Third input port representing the DP bridge input. > > port@3: > - type: object > description: > Fourth input port representing the DP bridge input. > > port@4: > - type: object > description: > Output port representing the DP bridge output. > > required: > - port@0 > - port@4 > - - '#address-cells' > - - '#size-cells' > + > + unevaluatedProperties: false > > allOf: > - if: > diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml > index 9f38f55fc990..6f478020014d 100644 > --- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml > @@ -20,6 +20,7 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > port@0: > @@ -37,6 +38,8 @@ properties: > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml > index ab5be2625224..d83e21ec0fb3 100644 > --- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml > @@ -35,15 +35,10 @@ properties: > - const: clk_mipi_cfg > > ports: > + $ref: /schemas/graph.yaml#/properties/ports > type: object Another case of $ref before type. > > properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > - > port@0: > type: object > description: MIPI DSI input port. > @@ -56,7 +51,7 @@ properties: > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > index efbb3d0117dc..eedf8b7f5173 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml > @@ -55,7 +55,7 @@ properties: > description: extcon specifier for the Power Delivery > > port: > - type: object > + $ref: /schemas/graph.yaml#/properties/port > description: A port node pointing to DPI host port node > > required: > diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > index 7a1c89b995e2..840d7f9b19bb 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > @@ -39,84 +39,28 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > - description: | > + description: > Primary MIPI port-1 for MIPI input > > - properties: > - reg: > - const: 0 > - > - patternProperties: > - "^endpoint(@[0-9])$": > - type: object > - additionalProperties: false > - > - properties: > - remote-endpoint: > - $ref: /schemas/types.yaml#/definitions/phandle > - > - required: > - - reg > - > port@1: > - type: object > - description: | > + description: > Additional MIPI port-2 for MIPI input, used in combination > with primary MIPI port-1 to drive higher resolution displays > > - properties: > - reg: > - const: 1 > - > - patternProperties: > - "^endpoint(@[0-9])$": > - type: object > - additionalProperties: false > - > - properties: > - remote-endpoint: > - $ref: /schemas/types.yaml#/definitions/phandle > - > - required: > - - reg > - > port@2: > - type: object > - description: | > + description: > HDMI port for HDMI output > > - properties: > - reg: > - const: 2 > - > - patternProperties: > - "^endpoint(@[0-9])$": > - type: object > - additionalProperties: false > - > - properties: > - remote-endpoint: > - $ref: /schemas/types.yaml#/definitions/phandle > - > - required: > - - reg > - > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@2 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > index e5e3c72630cf..517baf661ee5 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > @@ -46,24 +46,15 @@ properties: > > ports: > type: object > - description: | > - This device has two video ports. Their connections are modeled using the > - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt > - properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > port@0: > - type: object > description: | > For LVDS encoders, port 0 is the parallel input > For LVDS decoders, port 0 is the LVDS input > > port@1: > - type: object > description: | > For LVDS encoders, port 1 is the LVDS output > For LVDS decoders, port 1 is the parallel output > @@ -72,7 +63,7 @@ properties: > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > powerdown-gpios: > description: > diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml > index a125b2dd3a2f..9664ba22afa1 100644 > --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml > @@ -85,10 +85,8 @@ properties: > > ports: > type: object > - description: > - A node containing DSI input & output port nodes with endpoint > - definitions as documented in > - Documentation/devicetree/bindings/graph.txt. > + $ref: /schemas/graph.yaml#/properties/ports > + > properties: > port@0: > type: object Should type be dropped here ? > @@ -128,24 +126,15 @@ properties: > additionalProperties: false > > port@1: > - type: object > description: > DSI output port node to the panel or the next bridge > in the chain > > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > - > required: > - - '#address-cells' > - - '#size-cells' > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - '#address-cells' > diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > index 7e27cfcf770d..c9cf781ee7b2 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml > @@ -44,32 +44,21 @@ properties: > > ports: > type: object > - description: > - A node containing DSI input & output port nodes with endpoint > - definitions as documented in > - Documentation/devicetree/bindings/media/video-interfaces.txt > - Documentation/devicetree/bindings/graph.txt > - properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > port@0: > - type: object > - description: | > + description: > Video port for DSI input > > port@1: > - type: object > - description: | > + description: > Video port for eDP output (panel or connector). > > required: > - port@0 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml > index e5b163951b91..b3993300b335 100644 > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml > @@ -50,31 +50,20 @@ properties: > > ports: > type: object > - description: | > - This device has two video ports. Their connections are modelled using the > - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > - Each port shall have a single endpoint. > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > - > port@0: > - type: object > description: Parallel RGB input port > > port@1: > - type: object > description: LVDS output port > > required: > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > power-domains: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > index 3ddb35fcf0a2..96dd457a26c1 100644 > --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml > @@ -31,29 +31,20 @@ properties: > > ports: > type: object > - description: | > - This device has two video ports. Their connections are modeled using the > - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > - properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > port@0: > - type: object > description: The bridge input > > port@1: > - type: object > description: The bridge output > > required: > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > enable-gpios: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > index e42cb610f545..c04771d01137 100644 > --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > @@ -47,20 +47,21 @@ properties: > const: apb > > ports: > + $ref: /schemas/graph.yaml#/properties/ports > type: object OCD again :-) > > properties: > port@0: > - type: object > description: Input node to receive pixel data. > port@1: > - type: object > description: DSI output node to panel. > > required: > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - clock-names > - clocks > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > index 469ac4a34273..eed984e08d7c 100644 > --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > @@ -26,10 +26,8 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > description: | > - This device has four video ports. Their connections are modeled using the > - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > - > The device can operate in single-link mode or dual-link mode. In > single-link mode, all pixels are received on port@0, and port@1 shall not > contain any endpoint. In dual-link mode, even-numbered pixels are > @@ -37,33 +35,23 @@ properties: > port@1 shall contain endpoints. > > properties: > - '#address-cells': > - const: 1 > - > - '#size-cells': > - const: 0 > - > port@0: > - type: object > description: First LVDS input port > > port@1: > - type: object > description: Second LVDS input port > > port@2: > - type: object > description: First digital CMOS/TTL parallel output > > port@3: > - type: object > description: Second digital CMOS/TTL parallel output > > required: > - port@0 > - port@2 > > - additionalProperties: false > + unevaluatedProperties: false > > oe-gpios: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml > index f8622bd0f61e..d69b38270f78 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml > @@ -72,35 +72,14 @@ properties: > > ports: > type: object > - additionalProperties: false > + $ref: /schemas/graph.yaml#/properties/ports > + unevaluatedProperties: false Maybe after 'required' for consistency ? > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > - additionalProperties: false > - > description: > Video port for MIPI DSI input > > - properties: > - reg: > - const: 0 > - > - endpoint: > - type: object > - additionalProperties: false > - properties: > - remote-endpoint: true > - > - required: > - - reg > - > port@1: > type: object Should type be dropped ? > additionalProperties: false You drop additionalProperties for port@0 but not for port@1, is that intentional ? > @@ -175,8 +154,6 @@ properties: > - reg > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml > index 605831c1e836..ffc6540f58e4 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml > @@ -31,11 +31,8 @@ properties: > maximum: 7 > > ports: > - description: > - A node containing input and output port nodes with endpoint > - definitions as documented in > - Documentation/devicetree/bindings/media/video-interfaces.txt > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > port@0: > @@ -68,19 +65,13 @@ properties: > > port@1: > description: DVI output port. > - type: object > - > - properties: > - reg: > - const: 1 > - > - endpoint: > - type: object > > required: > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - ports > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml > index 195025e6803c..b622c6d489fd 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml > @@ -26,64 +26,23 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > - additionalProperties: false > - > - description: | > + description: > Video port for MIPI DSI input > > - properties: > - reg: > - const: 0 > - > - patternProperties: > - endpoint: > - type: object > - additionalProperties: false > - > - properties: > - remote-endpoint: true > - > - required: > - - reg > - > port@1: > - type: object > - additionalProperties: false > - > - description: | > + description: > Video port for MIPI DPI output (panel or connector). > > - properties: > - reg: > - const: 1 > - > - patternProperties: > - endpoint: > - type: object > - additionalProperties: false > - > - properties: > - remote-endpoint: true > - > - required: > - - reg > - > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > index c036a75db8f7..6dfe7293420d 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > @@ -43,14 +43,9 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > type: object Dropping type here too (as well as for port@1) ? > additionalProperties: false > @@ -99,11 +94,11 @@ properties: > - reg > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > index fd3113aa9ccd..89e5641df643 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml > @@ -45,30 +45,19 @@ properties: > > ports: > type: object > - description: > - A node containing input and output port nodes with endpoint definitions > - as documented in > - Documentation/devicetree/bindings/media/video-interfaces.txt > - properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > port@0: > - type: object > description: | > DSI Input. The remote endpoint phandle should be a > reference to a valid mipi_dsi_host device node. > > port@1: > - type: object > description: | > Video port for LVDS output (panel or connector). > > port@2: > - type: object > description: | > Video port for Dual link LVDS output (panel or connector). > > @@ -76,6 +65,8 @@ properties: > - port@0 > - port@1 > > + unevaluatedProperties: false > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml > index eebe88fed999..a31ca2d52b86 100644 > --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml > +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml > @@ -25,6 +25,7 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > > port: > + $ref: /schemas/graph.yaml#/properties/port > description: Connection to controller providing analog TV signals > > required: > diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml > index 71cb9220fa59..93eb14294e68 100644 > --- a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml > +++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml > @@ -36,6 +36,7 @@ properties: > description: the connector has pins for DVI dual-link > > port: > + $ref: /schemas/graph.yaml#/properties/port > description: Connection to controller providing DVI signals > > required: > diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml > index 14d7128af592..83c0d008265b 100644 > --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml > +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml > @@ -37,6 +37,7 @@ properties: > maxItems: 1 > > port: > + $ref: /schemas/graph.yaml#/properties/port > description: Connection to controller providing HDMI signals > > required: > diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml > index 5782c4bb3252..25f868002000 100644 > --- a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml > +++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml > @@ -20,6 +20,7 @@ properties: > $ref: /schemas/types.yaml#/definitions/phandle > > port: > + $ref: /schemas/graph.yaml#/properties/port > description: Connection to controller providing VGA signals > > required: > diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > index f1f25aa794d9..0091df9dd73b 100644 > --- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > @@ -74,7 +74,7 @@ properties: > - description: Must be 400 MHz > > port: > - type: object > + $ref: /schemas/graph.yaml#/properties/port > description: > A port node pointing to the input port of a HDMI/DP or MIPI display bridge. > > diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml > index 768050f30dba..2f252e8d5389 100644 > --- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml > +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml > @@ -39,18 +39,17 @@ properties: > minItems: 1 > > port: > - description: OF graph bindings (specified in bindings/graph.txt). > + $ref: /schemas/graph.yaml#/properties/port > > ports: > - description: OF graph bindings (specified in bindings/graph.txt). > type: object > + $ref: /schemas/graph.yaml#/properties/ports > + > properties: > port@0: > - type: object > description: DPI output, to interface with TFT panels. > > port@8: > - type: object > description: Link to the Image Processing Unit (IPU). > (See ingenic,ipu.yaml). > > diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml > index 0a697d45c2ad..bc6622b010ca 100644 > --- a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml > +++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml > @@ -36,7 +36,7 @@ properties: > maxItems: 1 > > port: > - type: object > + $ref: /schemas/graph.yaml#/properties/port > description: Display output node to DSI. > > required: > diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml > index 6b7fddc80c41..1261b061169e 100644 > --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml > +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml > @@ -38,6 +38,7 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > properties: > port@0: > type: object Same comment about the type property here. > @@ -65,6 +66,10 @@ properties: > - reg > - dual-lvds-even-pixels > > + required: > + - port@0 > + - port@1 > + > additionalProperties: false > > required: > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml > index cd6dc5461721..5b38dc89cb21 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml > @@ -68,16 +68,7 @@ properties: > > # Connectivity > port: > - type: object > - > - ports: > - type: object > - description: > - Panels receive video data through one or multiple connections. While > - the nature of those connections is specific to the panel type, the > - connectivity is expressed in a standard fashion using ports as specified > - in the device graph bindings defined in > - Documentation/devicetree/bindings/graph.txt. > + $ref: /schemas/graph.yaml#/properties/port This drops "ports", is it intentional ? > > ddc-i2c-bus: > $ref: /schemas/types.yaml#/definitions/phandle > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml > index 4110d003ce1f..524f4d786b02 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml > @@ -44,32 +44,23 @@ properties: > > ports: > type: object > + $ref: /schemas/graph.yaml#/properties/ports > > properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > - > port@0: > - type: object > description: > Port node with two endpoints, numbered 0 and 1, > connected respectively to vop0 and vop1. > > port@1: > - type: object > description: > Port node with one endpoint connected to a hdmi-connector node. > > required: > - - "#address-cells" > - - "#size-cells" > - port@0 > - port@1 > > - additionalProperties: false > + unevaluatedProperties: false > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > index ed8148e26e24..6f43d885c9b3 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > @@ -70,10 +70,7 @@ properties: > - const: dclk > > port: > - type: object > - description: > - A port node with endpoint definitions as defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. > + $ref: /schemas/graph.yaml#/properties/port > > assigned-clocks: > maxItems: 2 > diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml > index 327a14d85df8..ec0353593b22 100644 > --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml > @@ -52,22 +52,21 @@ properties: > > ports: > type: object > - description: > - A node containing DSI input & output port nodes with endpoint > - definitions as documented in > - Documentation/devicetree/bindings/media/video-interfaces.txt > - Documentation/devicetree/bindings/graph.txt > + $ref: /schemas/graph.yaml#/properties/ports > + > properties: > port@0: > - type: object > description: > DSI input port node, connected to the ltdc rgb output port. > > port@1: > - type: object > description: > DSI output port node, connected to a panel or a bridge input port" > > + required: > + - port@0 > + - port@1 > + > required: > - "#address-cells" > - "#size-cells" > diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml > index bf8ad916e9b0..c4588cd2ac7d 100644 > --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml > +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml > @@ -36,14 +36,13 @@ properties: > > port: > type: object > - description: > - "Video port for DPI RGB output. > + $ref: /schemas/graph.yaml#/properties/port > + description: | > + Video port for DPI RGB output. > ltdc has one video port with up to 2 endpoints: > - for external dpi rgb panel or bridge, using gpios. > - for internal dpi input of the MIPI DSI host controller. > Note: These 2 endpoints cannot be activated simultaneously. > - Please refer to the bindings defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt." > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > index 4dc30738ee57..60ad0e8fc7c0 100644 > --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > @@ -75,28 +75,18 @@ properties: > > ports: > type: object > - description: > - Ports as described in Documentation/devicetree/bindings/graph.txt > - properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > port@0: > - type: object > description: > The DSS OLDI output port node form video port 1 > > port@1: > - type: object > description: > The DSS DPI output port node from video port 2 > > - required: > - - "#address-cells" > - - "#size-cells" > + unevaluatedProperties: false > > ti,am65x-oldi-io-ctrl: > $ref: "/schemas/types.yaml#/definitions/phandle-array" > diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > index c9a947d55fa4..b3e0fa41180c 100644 > --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml > @@ -108,38 +108,26 @@ properties: > > ports: > type: object > - description: > - Ports as described in Documentation/devicetree/bindings/graph.txt > - properties: > - "#address-cells": > - const: 1 > - > - "#size-cells": > - const: 0 > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > port@0: > - type: object > description: > The output port node form video port 1 > > port@1: > - type: object > description: > The output port node from video port 2 > > port@2: > - type: object > description: > The output port node from video port 3 > > port@3: > - type: object > description: > The output port node from video port 4 > > - required: > - - "#address-cells" > - - "#size-cells" > + unevaluatedProperties: false > > max-memory-bandwidth: > $ref: /schemas/types.yaml#/definitions/uint32 > diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml > index 8f87b82c6695..74dd1ce46d00 100644 > --- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml > +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml > @@ -55,9 +55,7 @@ properties: > > port: > type: object > - description: > - Port as described in Documentation/devicetree/bindings/graph.txt. > - The DSS DPI output port node I think the second line of the description should be kept. > + $ref: /schemas/graph.yaml#/properties/port > > max-memory-bandwidth: > $ref: /schemas/types.yaml#/definitions/uint32 -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
