On Fri 30 Oct 05:47 CDT 2020, Akhil P Oommen wrote: > Add cooling-cells property and the cooling maps for the gpu tzones > to support GPU cooling. > > Signed-off-by: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxx> > Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 30 +++++++++++++++++++++++------- > 1 file changed, 23 insertions(+), 7 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index d46b383..8e2000c 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -2,7 +2,7 @@ > /* > * SC7180 SoC device tree source > * > - * Copyright (c) 2019, The Linux Foundation. All rights reserved. > + * Copyright (c) 2019-20, The Linux Foundation. All rights reserved. I took the liberty of spelling out 2020 here, as I applied this patch. Regards, Bjorn > */ > > #include <dt-bindings/clock/qcom,dispcc-sc7180.h> > @@ -1886,6 +1886,8 @@ > operating-points-v2 = <&gpu_opp_table>; > qcom,gmu = <&gmu>; > > + #cooling-cells = <2>; > + > interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; > interconnect-names = "gfx-mem"; > > @@ -3825,16 +3827,16 @@ > }; > > gpuss0-thermal { > - polling-delay-passive = <0>; > + polling-delay-passive = <100>; > polling-delay = <0>; > > thermal-sensors = <&tsens0 13>; > > trips { > gpuss0_alert0: trip-point0 { > - temperature = <90000>; > + temperature = <95000>; > hysteresis = <2000>; > - type = "hot"; > + type = "passive"; > }; > > gpuss0_crit: gpuss0_crit { > @@ -3843,19 +3845,26 @@ > type = "critical"; > }; > }; > + > + cooling-maps { > + map0 { > + trip = <&gpuss0_alert0>; > + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > }; > > gpuss1-thermal { > - polling-delay-passive = <0>; > + polling-delay-passive = <100>; > polling-delay = <0>; > > thermal-sensors = <&tsens0 14>; > > trips { > gpuss1_alert0: trip-point0 { > - temperature = <90000>; > + temperature = <95000>; > hysteresis = <2000>; > - type = "hot"; > + type = "passive"; > }; > > gpuss1_crit: gpuss1_crit { > @@ -3864,6 +3873,13 @@ > type = "critical"; > }; > }; > + > + cooling-maps { > + map0 { > + trip = <&gpuss1_alert0>; > + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > }; > > aoss1-thermal { > -- > 2.7.4 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel