Since we now turn off the EPOD regulator to reset the
hardware, we need to balance the regulators after that
point. If registering the master fails we only need
to disable one regulator. Fix this by open-coding
this leg of the error path.
Cc: Stephan Gerhold <stephan@xxxxxxxxxxx>
Fixes: c4842d4d0f74 ("drm/mcde: Fix display pipeline restart")
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/gpu/drm/mcde/mcde_drv.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index c592957ed07f..92f8bd907193 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -413,7 +413,13 @@ static int mcde_probe(struct platform_device *pdev)
match);
if (ret) {
dev_err(dev, "failed to add component master\n");
- goto clk_disable;
+ /*
+ * The EPOD regulator is already disabled at this point so some
+ * special errorpath code is needed
+ */
+ clk_disable_unprepare(mcde->mcde_clk);
+ regulator_disable(mcde->vana);
+ return ret;
}
return 0;
--
2.26.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
