At the moment we have three different modules: omapdss-base, omapdss, omapdrm. This setup is finally obsolete, as the last omapdrm specific panel has been converted to DRM panel. We can thus remove omapdss-base and omapdss, and just compile everything into omapdrm.ko. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> --- drivers/gpu/drm/omapdrm/Kconfig | 119 ++++++++++++++++++++++- drivers/gpu/drm/omapdrm/Makefile | 17 +++- drivers/gpu/drm/omapdrm/dss/Kconfig | 132 -------------------------- drivers/gpu/drm/omapdrm/dss/Makefile | 18 ---- drivers/gpu/drm/omapdrm/dss/base.c | 23 +---- drivers/gpu/drm/omapdrm/dss/display.c | 2 - drivers/gpu/drm/omapdrm/dss/dss.c | 11 +-- drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 + drivers/gpu/drm/omapdrm/dss/output.c | 11 --- drivers/gpu/drm/omapdrm/omap_drv.c | 12 ++- 10 files changed, 148 insertions(+), 200 deletions(-) delete mode 100644 drivers/gpu/drm/omapdrm/dss/Kconfig delete mode 100644 drivers/gpu/drm/omapdrm/dss/Makefile diff --git a/drivers/gpu/drm/omapdrm/Kconfig b/drivers/gpu/drm/omapdrm/Kconfig index cea3f44ea6d4..e7281da5bc6a 100644 --- a/drivers/gpu/drm/omapdrm/Kconfig +++ b/drivers/gpu/drm/omapdrm/Kconfig @@ -5,12 +5,129 @@ config DRM_OMAP depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM select OMAP2_DSS select DRM_KMS_HELPER + select VIDEOMODE_HELPERS + select HDMI default n help DRM display driver for OMAP2/3/4 based boards. if DRM_OMAP -source "drivers/gpu/drm/omapdrm/dss/Kconfig" +config OMAP2_DSS_DEBUG + bool "Debug support" + default n + help + This enables printing of debug messages. Alternatively, debug messages + can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting + appropriate flags in <debugfs>/dynamic_debug/control. + +config OMAP2_DSS_DEBUGFS + bool "Debugfs filesystem support" + depends on DEBUG_FS + default n + help + This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables + querying about clock configuration and register configuration of dss, + dispc, dsi, hdmi and rfbi. + +config OMAP2_DSS_COLLECT_IRQ_STATS + bool "Collect DSS IRQ statistics" + depends on OMAP2_DSS_DEBUGFS + default n + help + Collect DSS IRQ statistics, printable via debugfs. + + The statistics can be found from + <debugfs>/omapdss/dispc_irq for DISPC interrupts, and + <debugfs>/omapdss/dsi_irq for DSI interrupts. + +config OMAP2_DSS_DPI + bool "DPI support" + default y + help + DPI Interface. This is the Parallel Display Interface. + +config OMAP2_DSS_VENC + bool "VENC support" + default y + help + OMAP Video Encoder support for S-Video and composite TV-out. + +config OMAP2_DSS_HDMI_COMMON + bool + +config OMAP4_DSS_HDMI + bool "HDMI support for OMAP4" + default y + select OMAP2_DSS_HDMI_COMMON + help + HDMI support for OMAP4 based SoCs. + +config OMAP4_DSS_HDMI_CEC + bool "Enable HDMI CEC support for OMAP4" + depends on OMAP4_DSS_HDMI + select CEC_CORE + default y + help + When selected the HDMI transmitter will support the CEC feature. + +config OMAP5_DSS_HDMI + bool "HDMI support for OMAP5" + default n + select OMAP2_DSS_HDMI_COMMON + help + HDMI Interface for OMAP5 and similar cores. This adds the High + Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI + specification. + +config OMAP2_DSS_SDI + bool "SDI support" + default n + help + SDI (Serial Display Interface) support. + + SDI is a high speed one-way display serial bus between the host + processor and a display. + +config OMAP2_DSS_DSI + bool "DSI support" + default n + select DRM_MIPI_DSI + help + MIPI DSI (Display Serial Interface) support. + + DSI is a high speed half-duplex serial interface between the host + processor and a peripheral, such as a display or a framebuffer chip. + + See http://www.mipi.org/ for DSI specifications. + +config OMAP2_DSS_MIN_FCK_PER_PCK + int "Minimum FCK/PCK ratio (for scaling)" + range 0 32 + default 0 + help + This can be used to adjust the minimum FCK/PCK ratio. + + With this you can make sure that DISPC FCK is at least + n x PCK. Video plane scaling requires higher FCK than + normally. + + If this is set to 0, there's no extra constraint on the + DISPC FCK. However, the FCK will at minimum be + 2xPCK (if active matrix) or 3xPCK (if passive matrix). + + Max FCK is 173MHz, so this doesn't work if your PCK + is very high. + +config OMAP2_DSS_SLEEP_AFTER_VENC_RESET + bool "Sleep 20ms after VENC reset" + default y + help + There is a 20ms sleep after VENC reset which seemed to fix the + reset. The reason for the bug is unclear, and it's also unclear + on what platforms this happens. + + This option enables the sleep, and is enabled by default. You can + disable the sleep if it doesn't cause problems on your platform. endif diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile index 2a404e045b78..33fe7e937680 100644 --- a/drivers/gpu/drm/omapdrm/Makefile +++ b/drivers/gpu/drm/omapdrm/Makefile @@ -4,8 +4,6 @@ # Direct Rendering Infrastructure (DRI) # -obj-y += dss/ - omapdrm-y := omap_drv.o \ omap_irq.o \ omap_debugfs.o \ @@ -20,4 +18,17 @@ omapdrm-y := omap_drv.o \ omapdrm-$(CONFIG_DRM_FBDEV_EMULATION) += omap_fbdev.o -obj-$(CONFIG_DRM_OMAP) += omapdrm.o +omapdrm-y += dss/base.o dss/display.o dss/output.o dss/dss.o dss/dispc.o \ + dss/dispc_coefs.o dss/pll.o dss/video-pll.o +omapdrm-$(CONFIG_OMAP2_DSS_DPI) += dss/dpi.o +omapdrm-$(CONFIG_OMAP2_DSS_VENC) += dss/venc.o +omapdrm-$(CONFIG_OMAP2_DSS_SDI) += dss/sdi.o +omapdrm-$(CONFIG_OMAP2_DSS_DSI) += dss/dsi.o +omapdrm-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += dss/hdmi_common.o dss/hdmi_wp.o \ + dss/hdmi_pll.o dss/hdmi_phy.o +omapdrm-$(CONFIG_OMAP4_DSS_HDMI) += dss/hdmi4.o dss/hdmi4_core.o +omapdrm-$(CONFIG_OMAP4_DSS_HDMI_CEC) += dss/hdmi4_cec.o +omapdrm-$(CONFIG_OMAP5_DSS_HDMI) += dss/hdmi5.o dss/hdmi5_core.o +ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG + +obj-$(CONFIG_DRM_OMAP) += omapdrm.o diff --git a/drivers/gpu/drm/omapdrm/dss/Kconfig b/drivers/gpu/drm/omapdrm/dss/Kconfig deleted file mode 100644 index 6ec80771af3d..000000000000 --- a/drivers/gpu/drm/omapdrm/dss/Kconfig +++ /dev/null @@ -1,132 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config OMAP_DSS_BASE - tristate - -menuconfig OMAP2_DSS - tristate "OMAP2+ Display Subsystem support" - select OMAP_DSS_BASE - select VIDEOMODE_HELPERS - select HDMI - help - OMAP2+ Display Subsystem support. - -if OMAP2_DSS - -config OMAP2_DSS_DEBUG - bool "Debug support" - default n - help - This enables printing of debug messages. Alternatively, debug messages - can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting - appropriate flags in <debugfs>/dynamic_debug/control. - -config OMAP2_DSS_DEBUGFS - bool "Debugfs filesystem support" - depends on DEBUG_FS - default n - help - This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables - querying about clock configuration and register configuration of dss, - dispc, dsi, hdmi and rfbi. - -config OMAP2_DSS_COLLECT_IRQ_STATS - bool "Collect DSS IRQ statistics" - depends on OMAP2_DSS_DEBUGFS - default n - help - Collect DSS IRQ statistics, printable via debugfs. - - The statistics can be found from - <debugfs>/omapdss/dispc_irq for DISPC interrupts, and - <debugfs>/omapdss/dsi_irq for DSI interrupts. - -config OMAP2_DSS_DPI - bool "DPI support" - default y - help - DPI Interface. This is the Parallel Display Interface. - -config OMAP2_DSS_VENC - bool "VENC support" - default y - help - OMAP Video Encoder support for S-Video and composite TV-out. - -config OMAP2_DSS_HDMI_COMMON - bool - -config OMAP4_DSS_HDMI - bool "HDMI support for OMAP4" - default y - select OMAP2_DSS_HDMI_COMMON - help - HDMI support for OMAP4 based SoCs. - -config OMAP4_DSS_HDMI_CEC - bool "Enable HDMI CEC support for OMAP4" - depends on OMAP4_DSS_HDMI - select CEC_CORE - default y - help - When selected the HDMI transmitter will support the CEC feature. - -config OMAP5_DSS_HDMI - bool "HDMI support for OMAP5" - default n - select OMAP2_DSS_HDMI_COMMON - help - HDMI Interface for OMAP5 and similar cores. This adds the High - Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI - specification. - -config OMAP2_DSS_SDI - bool "SDI support" - default n - help - SDI (Serial Display Interface) support. - - SDI is a high speed one-way display serial bus between the host - processor and a display. - -config OMAP2_DSS_DSI - bool "DSI support" - default n - select DRM_MIPI_DSI - help - MIPI DSI (Display Serial Interface) support. - - DSI is a high speed half-duplex serial interface between the host - processor and a peripheral, such as a display or a framebuffer chip. - - See http://www.mipi.org/ for DSI specifications. - -config OMAP2_DSS_MIN_FCK_PER_PCK - int "Minimum FCK/PCK ratio (for scaling)" - range 0 32 - default 0 - help - This can be used to adjust the minimum FCK/PCK ratio. - - With this you can make sure that DISPC FCK is at least - n x PCK. Video plane scaling requires higher FCK than - normally. - - If this is set to 0, there's no extra constraint on the - DISPC FCK. However, the FCK will at minimum be - 2xPCK (if active matrix) or 3xPCK (if passive matrix). - - Max FCK is 173MHz, so this doesn't work if your PCK - is very high. - -config OMAP2_DSS_SLEEP_AFTER_VENC_RESET - bool "Sleep 20ms after VENC reset" - default y - help - There is a 20ms sleep after VENC reset which seemed to fix the - reset. The reason for the bug is unclear, and it's also unclear - on what platforms this happens. - - This option enables the sleep, and is enabled by default. You can - disable the sleep if it doesn't cause problems on your platform. - -endif diff --git a/drivers/gpu/drm/omapdrm/dss/Makefile b/drivers/gpu/drm/omapdrm/dss/Makefile deleted file mode 100644 index 811966cd7468..000000000000 --- a/drivers/gpu/drm/omapdrm/dss/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_OMAP_DSS_BASE) += omapdss-base.o -omapdss-base-y := base.o display.o output.o - -obj-$(CONFIG_OMAP2_DSS) += omapdss.o -# Core DSS files -omapdss-y := dss.o dispc.o dispc_coefs.o \ - pll.o video-pll.o -omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o -omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o -omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o -omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o -omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \ - hdmi_phy.o -omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o -omapdss-$(CONFIG_OMAP4_DSS_HDMI_CEC) += hdmi4_cec.o -omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o -ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c index d9a5e7b9d401..08c7c5024896 100644 --- a/drivers/gpu/drm/omapdrm/dss/base.c +++ b/drivers/gpu/drm/omapdrm/dss/base.c @@ -20,13 +20,11 @@ struct dispc_device *dispc_get_dispc(struct dss_device *dss) { return dss->dispc; } -EXPORT_SYMBOL(dispc_get_dispc); const struct dispc_ops *dispc_get_ops(struct dss_device *dss) { return dss->dispc_ops; } -EXPORT_SYMBOL(dispc_get_ops); /* ----------------------------------------------------------------------------- @@ -42,7 +40,6 @@ void omapdss_device_register(struct omap_dss_device *dssdev) list_add_tail(&dssdev->list, &omapdss_devices_list); mutex_unlock(&omapdss_devices_lock); } -EXPORT_SYMBOL_GPL(omapdss_device_register); void omapdss_device_unregister(struct omap_dss_device *dssdev) { @@ -50,7 +47,6 @@ void omapdss_device_unregister(struct omap_dss_device *dssdev) list_del(&dssdev->list); mutex_unlock(&omapdss_devices_lock); } -EXPORT_SYMBOL_GPL(omapdss_device_unregister); static bool omapdss_device_is_registered(struct device_node *node) { @@ -72,24 +68,16 @@ static bool omapdss_device_is_registered(struct device_node *node) struct omap_dss_device *omapdss_device_get(struct omap_dss_device *dssdev) { - if (!try_module_get(dssdev->owner)) + if (get_device(dssdev->dev) == NULL) return NULL; - if (get_device(dssdev->dev) == NULL) { - module_put(dssdev->owner); - return NULL; - } - return dssdev; } -EXPORT_SYMBOL(omapdss_device_get); void omapdss_device_put(struct omap_dss_device *dssdev) { put_device(dssdev->dev); - module_put(dssdev->owner); } -EXPORT_SYMBOL(omapdss_device_put); struct omap_dss_device *omapdss_find_device_by_node(struct device_node *node) { @@ -150,7 +138,6 @@ struct omap_dss_device *omapdss_device_next_output(struct omap_dss_device *from) mutex_unlock(&omapdss_devices_lock); return dssdev; } -EXPORT_SYMBOL(omapdss_device_next_output); static bool omapdss_device_is_connected(struct omap_dss_device *dssdev) { @@ -181,7 +168,6 @@ int omapdss_device_connect(struct dss_device *dss, return 0; } -EXPORT_SYMBOL_GPL(omapdss_device_connect); void omapdss_device_disconnect(struct omap_dss_device *src, struct omap_dss_device *dst) @@ -204,7 +190,6 @@ void omapdss_device_disconnect(struct omap_dss_device *src, dst->dss = NULL; } -EXPORT_SYMBOL_GPL(omapdss_device_disconnect); /* ----------------------------------------------------------------------------- * Components Handling @@ -290,7 +275,6 @@ void omapdss_gather_components(struct device *dev) for_each_available_child_of_node(dev->of_node, child) omapdss_walk_device(dev, child, true); } -EXPORT_SYMBOL(omapdss_gather_components); static bool omapdss_component_is_loaded(struct omapdss_comp_node *comp) { @@ -315,8 +299,3 @@ bool omapdss_stack_is_ready(void) return true; } -EXPORT_SYMBOL(omapdss_stack_is_ready); - -MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@xxxxxx>"); -MODULE_DESCRIPTION("OMAP Display Subsystem Base"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/omapdrm/dss/display.c b/drivers/gpu/drm/omapdrm/dss/display.c index 3b82158b1bfd..7b7ee2019eae 100644 --- a/drivers/gpu/drm/omapdrm/dss/display.c +++ b/drivers/gpu/drm/omapdrm/dss/display.c @@ -38,7 +38,6 @@ void omapdss_display_init(struct omap_dss_device *dssdev) dssdev->name = devm_kasprintf(dssdev->dev, GFP_KERNEL, "display%u", id); } -EXPORT_SYMBOL_GPL(omapdss_display_init); int omapdss_display_get_modes(struct drm_connector *connector, const struct videomode *vm) @@ -57,4 +56,3 @@ int omapdss_display_get_modes(struct drm_connector *connector, return 1; } -EXPORT_SYMBOL_GPL(omapdss_display_get_modes); diff --git a/drivers/gpu/drm/omapdrm/dss/dss.c b/drivers/gpu/drm/omapdrm/dss/dss.c index 6a160138bf88..6547a9f4b388 100644 --- a/drivers/gpu/drm/omapdrm/dss/dss.c +++ b/drivers/gpu/drm/omapdrm/dss/dss.c @@ -1638,21 +1638,14 @@ static struct platform_driver * const omap_dss_drivers[] = { #endif }; -static int __init omap_dss_init(void) +int __init omap_dss_init(void) { return platform_register_drivers(omap_dss_drivers, ARRAY_SIZE(omap_dss_drivers)); } -static void __exit omap_dss_exit(void) +void __exit omap_dss_exit(void) { platform_unregister_drivers(omap_dss_drivers, ARRAY_SIZE(omap_dss_drivers)); } - -module_init(omap_dss_init); -module_exit(omap_dss_exit); - -MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@xxxxxx>"); -MODULE_DESCRIPTION("OMAP2/3/4/5 Display Subsystem"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h index 4a0826c8fed5..4e7ae164de4f 100644 --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h @@ -458,4 +458,7 @@ const struct dispc_ops *dispc_get_ops(struct dss_device *dss); bool omapdss_stack_is_ready(void); void omapdss_gather_components(struct device *dev); +int omap_dss_init(void); +void omap_dss_exit(void); + #endif /* __OMAP_DRM_DSS_H */ diff --git a/drivers/gpu/drm/omapdrm/dss/output.c b/drivers/gpu/drm/omapdrm/dss/output.c index 40cb353572f6..7a14d2b5b2f7 100644 --- a/drivers/gpu/drm/omapdrm/dss/output.c +++ b/drivers/gpu/drm/omapdrm/dss/output.c @@ -73,7 +73,6 @@ int omapdss_device_init_output(struct omap_dss_device *out, omapdss_device_cleanup_output(out); return ret; } -EXPORT_SYMBOL(omapdss_device_init_output); void omapdss_device_cleanup_output(struct omap_dss_device *out) { @@ -81,7 +80,6 @@ void omapdss_device_cleanup_output(struct omap_dss_device *out) drm_panel_bridge_remove(out->next_bridge ? out->next_bridge : out->bridge); } -EXPORT_SYMBOL(omapdss_device_cleanup_output); int dss_install_mgr_ops(struct dss_device *dss, const struct dss_mgr_ops *mgr_ops, @@ -95,14 +93,12 @@ int dss_install_mgr_ops(struct dss_device *dss, return 0; } -EXPORT_SYMBOL(dss_install_mgr_ops); void dss_uninstall_mgr_ops(struct dss_device *dss) { dss->mgr_ops = NULL; dss->mgr_ops_priv = NULL; } -EXPORT_SYMBOL(dss_uninstall_mgr_ops); void dss_mgr_set_timings(struct omap_dss_device *dssdev, const struct videomode *vm) @@ -110,7 +106,6 @@ void dss_mgr_set_timings(struct omap_dss_device *dssdev, dssdev->dss->mgr_ops->set_timings(dssdev->dss->mgr_ops_priv, dssdev->dispc_channel, vm); } -EXPORT_SYMBOL(dss_mgr_set_timings); void dss_mgr_set_lcd_config(struct omap_dss_device *dssdev, const struct dss_lcd_mgr_config *config) @@ -118,28 +113,24 @@ void dss_mgr_set_lcd_config(struct omap_dss_device *dssdev, dssdev->dss->mgr_ops->set_lcd_config(dssdev->dss->mgr_ops_priv, dssdev->dispc_channel, config); } -EXPORT_SYMBOL(dss_mgr_set_lcd_config); int dss_mgr_enable(struct omap_dss_device *dssdev) { return dssdev->dss->mgr_ops->enable(dssdev->dss->mgr_ops_priv, dssdev->dispc_channel); } -EXPORT_SYMBOL(dss_mgr_enable); void dss_mgr_disable(struct omap_dss_device *dssdev) { dssdev->dss->mgr_ops->disable(dssdev->dss->mgr_ops_priv, dssdev->dispc_channel); } -EXPORT_SYMBOL(dss_mgr_disable); void dss_mgr_start_update(struct omap_dss_device *dssdev) { dssdev->dss->mgr_ops->start_update(dssdev->dss->mgr_ops_priv, dssdev->dispc_channel); } -EXPORT_SYMBOL(dss_mgr_start_update); int dss_mgr_register_framedone_handler(struct omap_dss_device *dssdev, void (*handler)(void *), void *data) @@ -150,7 +141,6 @@ int dss_mgr_register_framedone_handler(struct omap_dss_device *dssdev, dssdev->dispc_channel, handler, data); } -EXPORT_SYMBOL(dss_mgr_register_framedone_handler); void dss_mgr_unregister_framedone_handler(struct omap_dss_device *dssdev, void (*handler)(void *), void *data) @@ -161,4 +151,3 @@ void dss_mgr_unregister_framedone_handler(struct omap_dss_device *dssdev, dssdev->dispc_channel, handler, data); } -EXPORT_SYMBOL(dss_mgr_unregister_framedone_handler); diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index dbb8e95234b3..9d5f53e774ef 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -741,8 +741,14 @@ static struct platform_driver * const drivers[] = { static int __init omap_drm_init(void) { + int r; + DBG("init"); + r = omap_dss_init(); + if (r) + return r; + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); } @@ -751,13 +757,15 @@ static void __exit omap_drm_fini(void) DBG("fini"); platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); + + omap_dss_exit(); } -/* need late_initcall() so we load after dss_driver's are loaded */ -late_initcall(omap_drm_init); +module_init(omap_drm_init); module_exit(omap_drm_fini); MODULE_AUTHOR("Rob Clark <rob@xxxxxx>"); +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@xxxxxx>"); MODULE_DESCRIPTION("OMAP DRM Display Driver"); MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_LICENSE("GPL v2"); -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
