Hi Dmitry,
On 11/5/20 1:49 AM, Dmitry Osipenko wrote:
> Previously we were using count-weight of the T124 for T30 in order to
> get EMC clock rate that was reasonable for T30. In fact the count-weight
> should be x2 times smaller on T30, but then devfreq was producing a bit
> too low EMC clock rate for ISO memory clients, like display controller
> for example.
>
> Now both Tegra ACTMON and Tegra DRM display drivers support interconnect
> framework and display driver tells to ICC what a minimum memory bandwidth
> is needed, preventing FIFO underflows. Thus, now we can use a proper
> count-weight value for Tegra30 and MC_ALL device config needs a bit more
> aggressive boosting.
>
> Add a separate ACTMON driver configuration that is specific to Tegra30.
>
> Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
> Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
> drivers/devfreq/tegra30-devfreq.c | 68 ++++++++++++++++++++++++-------
> 1 file changed, 54 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
> index 4db027ca17e1..aaa22077815c 100644
> --- a/drivers/devfreq/tegra30-devfreq.c
> +++ b/drivers/devfreq/tegra30-devfreq.c
> @@ -57,13 +57,6 @@
> #define ACTMON_BELOW_WMARK_WINDOW 3
> #define ACTMON_BOOST_FREQ_STEP 16000
>
> -/*
> - * Activity counter is incremented every 256 memory transactions, and each
> - * transaction takes 4 EMC clocks for Tegra124; So the COUNT_WEIGHT is
> - * 4 * 256 = 1024.
> - */
> -#define ACTMON_COUNT_WEIGHT 0x400
> -
> /*
> * ACTMON_AVERAGE_WINDOW_LOG2: default value for @DEV_CTRL_K_VAL, which
> * translates to 2 ^ (K_VAL + 1). ex: 2 ^ (6 + 1) = 128
> @@ -111,7 +104,7 @@ enum tegra_actmon_device {
> MCCPU,
> };
>
> -static const struct tegra_devfreq_device_config actmon_device_configs[] = {
> +static const struct tegra_devfreq_device_config tegra124_device_configs[] = {
> {
> /* MCALL: All memory accesses (including from the CPUs) */
> .offset = 0x1c0,
> @@ -133,6 +126,28 @@ static const struct tegra_devfreq_device_config actmon_device_configs[] = {
> },
> };
>
> +static const struct tegra_devfreq_device_config tegra30_device_configs[] = {
> + {
> + /* MCALL: All memory accesses (including from the CPUs) */
> + .offset = 0x1c0,
> + .irq_mask = 1 << 26,
> + .boost_up_coeff = 200,
> + .boost_down_coeff = 50,
> + .boost_up_threshold = 20,
> + .boost_down_threshold = 10,
> + },
> + {
> + /* MCCPU: memory accesses from the CPUs */
> + .offset = 0x200,
> + .irq_mask = 1 << 25,
> + .boost_up_coeff = 800,
> + .boost_down_coeff = 40,
> + .boost_up_threshold = 27,
> + .boost_down_threshold = 10,
> + .avg_dependency_threshold = 16000, /* 16MHz in kHz units */
> + },
> +};
> +
> /**
> * struct tegra_devfreq_device - state specific to an ACTMON device
> *
> @@ -155,6 +170,12 @@ struct tegra_devfreq_device {
> unsigned long target_freq;
> };
>
> +struct tegra_devfreq_soc_data {
> + const struct tegra_devfreq_device_config *configs;
> + /* Weight value for count measurements */
> + unsigned int count_weight;
> +};
> +
> struct tegra_devfreq {
> struct devfreq *devfreq;
> struct opp_table *opp_table;
> @@ -171,11 +192,13 @@ struct tegra_devfreq {
> struct delayed_work cpufreq_update_work;
> struct notifier_block cpu_rate_change_nb;
>
> - struct tegra_devfreq_device devices[ARRAY_SIZE(actmon_device_configs)];
> + struct tegra_devfreq_device devices[2];
>
> unsigned int irq;
>
> bool started;
> +
> + const struct tegra_devfreq_soc_data *soc;
> };
>
> struct tegra_actmon_emc_ratio {
> @@ -488,7 +511,7 @@ static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
> tegra_devfreq_update_avg_wmark(tegra, dev);
> tegra_devfreq_update_wmark(tegra, dev);
>
> - device_writel(dev, ACTMON_COUNT_WEIGHT, ACTMON_DEV_COUNT_WEIGHT);
> + device_writel(dev, tegra->soc->count_weight, ACTMON_DEV_COUNT_WEIGHT);
> device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
>
> val |= ACTMON_DEV_CTRL_ENB_PERIODIC;
> @@ -787,6 +810,8 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
> if (!tegra)
> return -ENOMEM;
>
> + tegra->soc = of_device_get_match_data(&pdev->dev);
> +
> tegra->regs = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(tegra->regs))
> return PTR_ERR(tegra->regs);
> @@ -866,9 +891,9 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>
> tegra->max_freq = rate / KHZ;
>
> - for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++) {
> + for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
> dev = tegra->devices + i;
> - dev->config = actmon_device_configs + i;
> + dev->config = tegra->soc->configs + i;
> dev->regs = tegra->regs + dev->config->offset;
> }
>
> @@ -933,9 +958,24 @@ static int tegra_devfreq_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct tegra_devfreq_soc_data tegra124_soc = {
> + .configs = tegra124_device_configs,
> +
> + /*
> + * Activity counter is incremented every 256 memory transactions,
> + * and each transaction takes 4 EMC clocks.
> + */
> + .count_weight = 4 * 256,
> +};
> +
> +static const struct tegra_devfreq_soc_data tegra30_soc = {
> + .configs = tegra30_device_configs,
> + .count_weight = 2 * 256,
> +};
> +
> static const struct of_device_id tegra_devfreq_of_match[] = {
> - { .compatible = "nvidia,tegra30-actmon" },
> - { .compatible = "nvidia,tegra124-actmon" },
> + { .compatible = "nvidia,tegra30-actmon", .data = &tegra30_soc, },
> + { .compatible = "nvidia,tegra124-actmon", .data = &tegra124_soc, },
> { },
> };
>
>
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
