On Wed, Nov 04, 2020 at 11:36:52AM +0100, Sylwester Nawrocki wrote: > This patch adds a generic interconnect driver for Exynos SoCs in order > to provide interconnect functionality for each "samsung,exynos-bus" > compatible device. > > The SoC topology is a graph (or more specifically, a tree) and its > edges are described by specifying in the 'interconnects' property > the interconnect consumer path for each interconnect provider DT node. > > Each bus is now an interconnect provider and an interconnect node as > well (cf. Documentation/interconnect/interconnect.rst), i.e. every bus > registers itself as a node. Node IDs are not hard coded but rather > assigned dynamically at runtime. This approach allows for using this > driver with various Exynos SoCs. > > Frequencies requested via the interconnect API for a given node are > propagated to devfreq using dev_pm_qos_update_request(). Please note > that it is not an error when CONFIG_INTERCONNECT is 'n', in which > case all interconnect API functions are no-op. > > The samsung,data-clk-ratio DT property is used to specify the ratio > of the interconect bandwidth to the minimum data clock frequency > for each bus. > > Due to unspecified relative probing order, -EPROBE_DEFER may be > propagated to ensure that the parent is probed before its children. > > Signed-off-by: Artur Świgoń <a.swigon@xxxxxxxxxxx> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> > --- > Changes for v8: > - renamed drivers/interconnect/exynos to drivers/interconnect/samsung, > - added missing driver sync_state callback assignment. > > Changes for v7: > - adjusted to the DT property changes: "interconnects" instead > of "samsung,interconnect-parent", "samsung,data-clk-ratio" > instead of "bus-width", > - adaptation to of_icc_get_from_provider() function changes > in v5.10-rc1. > > Changes for v6: > - corrected of_node dereferencing in exynos_icc_get_parent() > function, > - corrected initialization of icc_node->name so as to avoid > direct of_node->name dereferencing, > - added parsing of bus-width DT property. > > Changes for v5: > - adjust to renamed exynos,interconnect-parent-node property, > - use automatically generated platform device id as the interconect > node id instead of a now unavailable devfreq->id field, > - add icc_ prefix to some variables to make the code more self-commenting, > - use icc_nodes_remove() instead of icc_node_del() + icc_node_destroy(), > - adjust to exynos,interconnect-parent-node property rename to > samsung,interconnect-parent, > - converted to a separate platform driver in drivers/interconnect. > --- > drivers/interconnect/Kconfig | 1 + > drivers/interconnect/Makefile | 1 + > drivers/interconnect/samsung/Kconfig | 13 +++ > drivers/interconnect/samsung/Makefile | 4 + > drivers/interconnect/samsung/exynos.c | 199 ++++++++++++++++++++++++++++++++++ > 5 files changed, 218 insertions(+) > create mode 100644 drivers/interconnect/samsung/Kconfig > create mode 100644 drivers/interconnect/samsung/Makefile > create mode 100644 drivers/interconnect/samsung/exynos.c > > diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig > index 5b7204e..d637a89 100644 > --- a/drivers/interconnect/Kconfig > +++ b/drivers/interconnect/Kconfig > @@ -13,5 +13,6 @@ if INTERCONNECT > > source "drivers/interconnect/imx/Kconfig" > source "drivers/interconnect/qcom/Kconfig" > +source "drivers/interconnect/samsung/Kconfig" > > endif > diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile > index d203520..c2f9e9d 100644 > --- a/drivers/interconnect/Makefile > +++ b/drivers/interconnect/Makefile > @@ -6,3 +6,4 @@ icc-core-objs := core.o bulk.o > obj-$(CONFIG_INTERCONNECT) += icc-core.o > obj-$(CONFIG_INTERCONNECT_IMX) += imx/ > obj-$(CONFIG_INTERCONNECT_QCOM) += qcom/ > +obj-$(CONFIG_INTERCONNECT_SAMSUNG) += samsung/ > \ No newline at end of file This needs a fix. > diff --git a/drivers/interconnect/samsung/Kconfig b/drivers/interconnect/samsung/Kconfig > new file mode 100644 > index 0000000..508ed64 > --- /dev/null > +++ b/drivers/interconnect/samsung/Kconfig > @@ -0,0 +1,13 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +config INTERCONNECT_SAMSUNG > + bool "Samsung interconnect drivers" "Samsung SoC interconnect drivers" > + depends on ARCH_EXYNOS || COMPILE_TEST Don't the depend on INTERCONNECT? > + help > + Interconnect drivers for Samsung SoCs. > + > + One line break > +config INTERCONNECT_EXYNOS > + tristate "Exynos generic interconnect driver" > + depends on INTERCONNECT_SAMSUNG How about: default y if ARCH_EXYNOS > + help > + Generic interconnect driver for Exynos SoCs. > diff --git a/drivers/interconnect/samsung/Makefile b/drivers/interconnect/samsung/Makefile > new file mode 100644 > index 0000000..e19d1df > --- /dev/null > +++ b/drivers/interconnect/samsung/Makefile > @@ -0,0 +1,4 @@ > +# SPDX-License-Identifier: GPL-2.0 > +exynos-interconnect-objs := exynos.o What is this line for? Best regards, Krzysztof > + > +obj-$(CONFIG_INTERCONNECT_EXYNOS) += exynos-interconnect.o > diff --git a/drivers/interconnect/samsung/exynos.c b/drivers/interconnect/samsung/exynos.c > new file mode 100644 > index 0000000..6559d8c _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
