No reason having the same code in every architecture
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: sparclinux@xxxxxxxxxxxxxxx
---
V3: Remove the kmap types cruft
---
arch/sparc/Kconfig | 1
arch/sparc/include/asm/highmem.h | 8 +-
arch/sparc/include/asm/kmap_types.h | 11 ---
arch/sparc/include/asm/vaddrs.h | 4 -
arch/sparc/mm/Makefile | 3
arch/sparc/mm/highmem.c | 115 ------------------------------------
arch/sparc/mm/srmmu.c | 2
7 files changed, 8 insertions(+), 136 deletions(-)
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -139,6 +139,7 @@ config MMU
config HIGHMEM
bool
default y if SPARC32
+ select KMAP_LOCAL
config ZONE_DMA
bool
--- a/arch/sparc/include/asm/highmem.h
+++ b/arch/sparc/include/asm/highmem.h
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/pgtable.h>
#include <asm/vaddrs.h>
-#include <asm/kmap_types.h>
#include <asm/pgtsrmmu.h>
/* declarations for highmem.c */
@@ -33,8 +32,6 @@ extern unsigned long highstart_pfn, high
#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE)
extern pte_t *pkmap_page_table;
-void kmap_init(void) __init;
-
/*
* Right now we initialize only a single pte table. It can be extended
* easily, subsequent pte tables have to be allocated in one physical
@@ -53,6 +50,11 @@ void kmap_init(void) __init;
#define flush_cache_kmaps() flush_cache_all()
+/* FIXME: Use __flush_tlb_one(vaddr) instead of flush_cache_all() -- Anton */
+#define arch_kmap_local_post_map(vaddr, pteval) flush_cache_all()
+#define arch_kmap_local_post_unmap(vaddr) flush_cache_all()
+
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
--- a/arch/sparc/include/asm/kmap_types.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-/* Dummy header just to define km_type. None of this
- * is actually used on sparc. -DaveM
- */
-
-#include <asm-generic/kmap_types.h>
-
-#endif
--- a/arch/sparc/include/asm/vaddrs.h
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -32,13 +32,13 @@
#define SRMMU_NOCACHE_ALCRATIO 64 /* 256 pages per 64MB of system RAM */
#ifndef __ASSEMBLY__
-#include <asm/kmap_types.h>
+#include <asm/kmap_size.h>
enum fixed_addresses {
FIX_HOLE,
#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN,
- FIX_KMAP_END = (KM_TYPE_NR * NR_CPUS),
+ FIX_KMAP_END = (KM_MAX_IDX * NR_CPUS),
#endif
__end_of_fixed_addresses
};
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -15,6 +15,3 @@ obj-$(CONFIG_SPARC32) += leon_mm.o
# Only used by sparc64
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-
-# Only used by sparc32
-obj-$(CONFIG_HIGHMEM) += highmem.o
--- a/arch/sparc/mm/highmem.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * highmem.c: virtual kernel memory mappings for high memory
- *
- * Provides kernel-static versions of atomic kmap functions originally
- * found as inlines in include/asm-sparc/highmem.h. These became
- * needed as kmap_atomic() and kunmap_atomic() started getting
- * called from within modules.
- * -- Tomas Szepe <szepe@xxxxxxxxxxxxxxx>, September 2002
- *
- * But kmap_atomic() and kunmap_atomic() cannot be inlined in
- * modules because they are loaded with btfixup-ped functions.
- */
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need it.
- *
- * XXX This is an old text. Actually, it's good to use atomic kmaps,
- * provided you remember that they are atomic and not try to sleep
- * with a kmap taken, much like a spinlock. Non-atomic kmaps are
- * shared by CPUs, and so precious, and establishing them requires IPI.
- * Atomic kmaps are lightweight and we may have NCPUS more of them.
- */
-#include <linux/highmem.h>
-#include <linux/export.h>
-#include <linux/mm.h>
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/vaddrs.h>
-
-static pte_t *kmap_pte;
-
-void __init kmap_init(void)
-{
- unsigned long address = __fix_to_virt(FIX_KMAP_BEGIN);
-
- /* cache the first kmap pte */
- kmap_pte = virt_to_kpte(address);
-}
-
-void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
-{
- unsigned long vaddr;
- long idx, type;
-
- type = kmap_atomic_idx_push();
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-
-/* XXX Fix - Anton */
-#if 0
- __flush_cache_one(vaddr);
-#else
- flush_cache_all();
-#endif
-
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- set_pte(kmap_pte-idx, mk_pte(page, prot));
-/* XXX Fix - Anton */
-#if 0
- __flush_tlb_one(vaddr);
-#else
- flush_tlb_all();
-#endif
-
- return (void*) vaddr;
-}
-EXPORT_SYMBOL(kmap_atomic_high_prot);
-
-void kunmap_atomic_high(void *kvaddr)
-{
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- int type;
-
- if (vaddr < FIXADDR_START)
- return;
-
- type = kmap_atomic_idx();
-
-#ifdef CONFIG_DEBUG_HIGHMEM
- {
- unsigned long idx;
-
- idx = type + KM_TYPE_NR * smp_processor_id();
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN+idx));
-
- /* XXX Fix - Anton */
-#if 0
- __flush_cache_one(vaddr);
-#else
- flush_cache_all();
-#endif
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- /* XXX Fix - Anton */
-#if 0
- __flush_tlb_one(vaddr);
-#else
- flush_tlb_all();
-#endif
- }
-#endif
-
- kmap_atomic_idx_pop();
-}
-EXPORT_SYMBOL(kunmap_atomic_high);
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -971,8 +971,6 @@ void __init srmmu_paging_init(void)
sparc_context_init(num_contexts);
- kmap_init();
-
{
unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
