Add cooling device support to gpu. A cooling device is bound to a
thermal zone to allow thermal mitigation.
Signed-off-by: Akhil P Oommen <akhilpo@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/display/msm/gpu.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 1af0ff1..090dcb3 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -39,6 +39,10 @@ Required properties:
a4xx Snapdragon SoCs. See
Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
+Optional properties:
+- #cooling-cells: The value must be 2. For details, please refer
+ Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
+
Example 3xx/4xx:
/ {
@@ -61,6 +65,7 @@ Example 3xx/4xx:
power-domains = <&mmcc OXILICX_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
iommus = <&gpu_iommu 0>;
+ #cooling-cells = <2>;
};
gpu_sram: ocmem@fdd00000 {
@@ -98,6 +103,8 @@ Example a6xx (with GMU):
reg = <0x5000000 0x40000>, <0x509e000 0x10>;
reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+ #cooling-cells = <2>;
+
/*
* Look ma, no clocks! The GPU clocks and power are
* controlled entirely by the GMU
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
