[PATCH v2 2/3] drm: panel: simple: Add BOE NV110WTM-N61

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for the BOE NV110WTM-N61 panel.  The EDID lists two modes
(one for 60 Hz refresh rate and one for 40 Hz), so we'll list both of
them here.

Note that the panel datasheet requires 80 ms between HPD asserting and
the backlight power being turned on.  We'll use the new timing
constraints structure to do this cleanly.  This assumes that the
backlight will be enabled _after_ the panel enable finishes.  This is
how it works today and seems a sane assumption.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v2:
- Adjust for shorter names in patch #1.

 drivers/gpu/drm/panel/panel-simple.c | 48 ++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 2613b9434548..aef9f9b00d2b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1401,6 +1401,51 @@ static const struct panel_desc boe_nv101wxmn51 = {
 	},
 };
 
+static const struct drm_display_mode boe_nv110wtm_n61_modes[] = {
+	{
+		.clock = 207800,
+		.hdisplay = 2160,
+		.hsync_start = 2160 + 48,
+		.hsync_end = 2160 + 48 + 32,
+		.htotal = 2160 + 48 + 32 + 100,
+		.vdisplay = 1440,
+		.vsync_start = 1440 + 3,
+		.vsync_end = 1440 + 3 + 6,
+		.vtotal = 1440 + 3 + 6 + 31,
+	},
+	{
+		.clock = 138500,
+		.hdisplay = 2160,
+		.hsync_start = 2160 + 48,
+		.hsync_end = 2160 + 48 + 32,
+		.htotal = 2160 + 48 + 32 + 100,
+		.vdisplay = 1440,
+		.vsync_start = 1440 + 3,
+		.vsync_end = 1440 + 3 + 6,
+		.vtotal = 1440 + 3 + 6 + 31,
+	},
+};
+
+static const struct panel_desc boe_nv110wtm_n61 = {
+	.modes = boe_nv110wtm_n61_modes,
+	.num_modes = ARRAY_SIZE(boe_nv110wtm_n61_modes),
+	.bpc = 8,
+	.size = {
+		.width = 233,
+		.height = 155,
+	},
+	.delay = {
+		.hpd_absent_delay = 200,
+	},
+	.min_times = {
+		.prepare_to_enable = 80,
+		.unprepare_to_prepare = 500,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
+	.connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
 /* Also used for boe_nv133fhm_n62 */
 static const struct drm_display_mode boe_nv133fhm_n61_modes = {
 	.clock = 147840,
@@ -4063,6 +4108,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "boe,nv101wxmn51",
 		.data = &boe_nv101wxmn51,
+	}, {
+		.compatible = "boe,nv110wtm-n61",
+		.data = &boe_nv110wtm_n61,
 	}, {
 		.compatible = "boe,nv133fhm-n61",
 		.data = &boe_nv133fhm_n61,
-- 
2.29.1.341.ge80a0c044ae-goog

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux