On Tue, Oct 13, 2020 at 04:52:05PM +0800, Chunfeng Yun wrote: > Convert mediatek,mtk-xhci.txt to YAML schema mediatek,mtk-xhci.yaml > There's some refactoring of usb-hcd.yaml and XHCI schema under review and this may need some refactoring on top of it. > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > --- > v2: new patch > --- > .../bindings/usb/mediatek,mtk-xhci.txt | 121 ------------ > .../bindings/usb/mediatek,mtk-xhci.yaml | 180 ++++++++++++++++++ > 2 files changed, 180 insertions(+), 121 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt > create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > new file mode 100644 > index 000000000000..ea696c8f1269 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > @@ -0,0 +1,180 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2020 MediaTek > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek USB3 xHCI Device Tree Bindings > + > +maintainers: > + - Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > + > +allOf: > + - $ref: "usb-hcd.yaml" > + > +description: | > + There are two scenarios: > + case 1: only supports xHCI driver; > + case 2: supports dual-role mode, and the host is based on xHCI driver. > + > +properties: > + #common properties for both case 1 and case 2 > + compatible: > + items: > + - enum: > + - mediatek,mt2712-xhci > + - mediatek,mt7622-xhci > + - mediatek,mt7629-xhci > + - mediatek,mt8173-xhci > + - mediatek,mt8183-xhci > + - const: mediatek,mtk-xhci > + > + reg: > + minItems: 1 > + maxItems: 2 > + items: > + - description: the registers of xHCI MAC > + - description: the registers of IP Port Control > + > + reg-names: > + minItems: 1 > + maxItems: 2 > + items: > + - const: mac > + - const: ippc #optional, only needed for case 1. > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + description: A phandle to USB power domain node to control USB's MTCMOS > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 5 > + items: > + - description: Controller clock used by normal mode > + - description: Reference clock used by low power mode etc > + - description: Mcu bus clock for register access > + - description: DMA bus clock for data transfer > + - description: controller clock > + > + clock-names: > + minItems: 1 > + maxItems: 5 > + items: > + - const: sys_ck #required, the following ones are optional > + - const: ref_ck > + - const: mcu_ck > + - const: dma_ck > + - const: xhci_ck > + > + phys: > + $ref: /usb/usb-hcd.yaml# That doesn't look right... > + > + vusb33-supply: > + description: Regulator of USB AVDD3.3v > + > + vbus-supply: > + description: Regulator of USB VBUS5v > + > + usb3-lpm-capable: > + description: supports USB3.0 LPM > + type: boolean > + > + imod-interval-ns: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Interrupt moderation interval value, it is 8 times as much as that > + defined in the xHCI spec on MTK's controller. > + default: 5000 > + > + #the following properties are only used for case 1 > + pinctrl-0: > + description: A phandle to the default pinctrl state. > + > + pinctrl-names: > + description: A pinctrl state named "default" must be defined. > + See pinctrl/pinctrl-bindings.txt > + const: default Don't need pinctrl-* properties. They are always allowed. > + > + wakeup-source: > + description: enable USB remote wakeup, see power/wakeup-source.txt > + type: boolean > + > + mediatek,syscon-wakeup: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + maxItems: 1 > + description: | > + A phandle to syscon used to access the register of the USB wakeup glue > + layer between xHCI and SPM, the field should always be a multiple of > + 3 cells long. A multiple of 3? How would there be more than 3 cells? > + > + items: > + - description: > + The first cell represents a phandle to syscon > + - description: > + The second cell represents the register base address of the glue > + layer in syscon > + - description: > + The third cell represents the hardware version of the glue layer, > + 1 is used by mt8173 etc, 2 is used by mt2712 etc > + enum: [1, 2] > + > + mediatek,u3p-dis-msk: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: The mask to disable u3ports, bit0 for u3port0, > + bit1 for u3port1, ... etc > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^[a-f]+@[0-9a-f]+$": > + $ref: /usb/usb-hcd.yaml# > + type: object > + description: The hard wired USB devices. > + > +dependencies: > + wakeup-source: [ 'mediatek,syscon-wakeup' ] > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - clocks > + - clock-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt8173-clk.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/phy/phy.h> > + #include <dt-bindings/power/mt8173-power.h> > + > + usb3: usb@11270000 { > + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; > + reg = <0x11270000 0x1000>, <0x11280700 0x0100>; > + reg-names = "mac", "ippc"; > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; > + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; > + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; > + clock-names = "sys_ck", "ref_ck"; > + phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; > + vusb33-supply = <&mt6397_vusb_reg>; > + vbus-supply = <&usb_p1_vbus>; > + imod-interval-ns = <10000>; > + mediatek,syscon-wakeup = <&pericfg 0x400 1>; > + wakeup-source; > + usb3-lpm-capable; > + }; > +... > -- > 2.18.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
