On Wed, Sep 16, 2020 at 06:57:05PM +0200, Maxime Ripard wrote: > On Mon, Sep 14, 2020 at 07:14:11PM +0900, Hoegeun Kwon wrote: > > Hi Maxime, > > > > On 9/8/20 9:00 PM, Maxime Ripard wrote: > > > Hi Hoegeun, > > > > > > On Mon, Sep 07, 2020 at 08:49:12PM +0900, Hoegeun Kwon wrote: > > >> On 9/3/20 5:00 PM, Maxime Ripard wrote: > > >>> Hi everyone, > > >>> > > >>> Here's a (pretty long) series to introduce support in the VC4 DRM driver > > >>> for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4). > > >>> > > >>> The main differences are that there's two HDMI controllers and that there's > > >>> more pixelvalve now. Those pixelvalve come with a mux in the HVS that still > > >>> have only 3 FIFOs. Both of those differences are breaking a bunch of > > >>> expectations in the driver, so we first need a good bunch of cleanup and > > >>> reworks to introduce support for the new controllers. > > >>> > > >>> Similarly, the HDMI controller has all its registers shuffled and split in > > >>> multiple controllers now, so we need a bunch of changes to support this as > > >>> well. > > >>> > > >>> Only the HDMI support is enabled for now (even though the DPI and DSI > > >>> outputs have been tested too). > > >>> > > >>> Let me know if you have any comments > > >>> Maxime > > >>> > > >>> Cc: bcm-kernel-feedback-list@xxxxxxxxxxxx > > >>> Cc: devicetree@xxxxxxxxxxxxxxx > > >>> Cc: Kamal Dasu <kdasu.kdev@xxxxxxxxx> > > >>> Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > > >>> Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > >>> Cc: Stephen Boyd <sboyd@xxxxxxxxxx> > > >>> > > >>> Changes from v4: > > >>> - Rebased on top of next-20200828 > > >>> - Collected the various tags > > >>> - Fixed some issues with 4k support and dual output (thanks Hoegeun!) > > >> Thanks for your v5 patchset. > > >> > > >> I tested all patches based on the next-20200812. > > > Thanks again for testing all the patches > > > > > >> Everything else is fine, but the dual hdmi modetest doesn't work well in my > > >> environment... > > >> > > >> In my environment, dsi is not connected, I have seen your answer[1]. > > > Can you share a bit more your setup? What monitors are being connected > > > to each HDMI port? Do you hotplug any? > > Yes, Monitors are being connected to each HDMI ports. (did not use hotplug) > > > > When booting, both HDMI-0 and 1 are recognized and the kernel log is output. > > But after run modetest on HDMI-0(works) and modetest on HDMI-1(works), > > crtc timed out occurs on HDMI-0 and does not work. > > > > When HDMI-0 is not working we do a modetest on HDMI-0, it will work agin > > after about 40 sec. > > > > Below is the log for modetest. > > > > > > root:~> modetest -Mvc4 -s 32:1280x720 - HDMI-0 works > > setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64 > > failed to set gamma: Invalid argument > > > > root:~> modetest -Mvc4 -s 32:1280x720 - HDMI-0 works > > setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64 > > failed to set gamma: Invalid argument > > > > root:~> modetest -Mvc4 -s 38:1280x720 - HDMI-1 works > > setting mode 1280x720-60Hz@XR24 on connectors 38, crtc 69 > > failed to set gamma: Invalid argument > > > > - Crtc timed out occurs on HDMI-0 and > > does not work. > > > > [ 71.134283] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* > > [CRTC:64:crtc-3] flip_done timed out > > [ 81.374296] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [CRTC:64:crtc-3] flip_done timed out > > [ 91.618380] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [CONNECTOR:32:HDMI-A-1] flip_done timed out > > [ 101.854274] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [PLANE:60:plane-3] flip_done timed out > > > > [ 112.094271] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* > > [CRTC:64:crtc-3] flip_done timed out > > [ 122.590311] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [CRTC:64:crtc-3] flip_done timed out > > > > root:~> modetest -Mvc4 -s 32:1280x720 > > [ 132.830309] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [CONNECTOR:32:HDMI-A-1] flip_done timed out > > [ 143.070307] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [PLANE:60:plane-3] flip_done timed out > > [ 153.310303] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* > > [CRTC:64:crtc-3] flip_done timed out > > setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64 > > [ 163.550340] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [CRTC:64:crtc-3] flip_done timed out > > [ 173.790277] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [CONNECTOR:32:HDMI-A-1] flip_done timed out > > [ 184.030286] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > > [PLANE:60:plane-3] flip_done timed out > > failed to set gamma: Invalid argument - HDMI-0 works > > Thanks :) > > I was able to reproduce it just by also letting X boot. I'm on a good > path to fix it and found a workaround. I'll send you the patch in the > upcoming days :) It took a bit longer than expected but the last 4 patches I just sent should fix that issue Thanks for reporting it! Maxime
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
