Hi Maxime,
On 9/18/20 11:59 PM, Maxime Ripard wrote:
> The HVS has three FIFOs that can be assigned to a number of PixelValves
> through a mux.
>
> However, changing that FIFO requires that we disable and then enable the
> pixelvalve, so we want to assign FIFOs to all the enabled CRTCs, and not
> just the active ones.
Thanks for the patch.
There is a problem when doing page flip.
After connecting 2 HDMIs without hotplug and booting.(Same thing when
using hotplug.)
When executing page flip for each of HDMI 0 and 1 in modetest
operation does not work normally. (crtc irq does not occur, so timeout
occurs.)
Sometimes both hdmi 0 or 1 work or not.
LOGs:
root:~> modetest -Mvc4 -s 32:1280x720 -v
setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64
failed to set gamma: Invalid argument
freq: 60.24Hz
freq: 60.00Hz
root:~> modetest -Mvc4 -s 38:1280x720 -v
setting mode 1280x720-60Hz@XR24 on connectors 38, crtc 69
failed to set gamma: Invalid argument
select timed out or error (ret 0)
select timed out or error (ret 0)
Could you please check it?
Best regards,
Hoegeun
>
> Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> ---
> drivers/gpu/drm/vc4/vc4_kms.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
> index af3ee3dcdab6..01fa60844695 100644
> --- a/drivers/gpu/drm/vc4/vc4_kms.c
> +++ b/drivers/gpu/drm/vc4/vc4_kms.c
> @@ -643,7 +643,7 @@ vc4_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
> struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
> unsigned int matching_channels;
>
> - if (!crtc_state->active)
> + if (!crtc_state->enable)
> continue;
>
> /*
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
