On 07/07/2020 17:45, Dennis YC Hsieh wrote:
add write_s_mask function in cmdq helper functions which
writes value contains in internal register to address
with mask and large dma access support.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
Now pushed to v5.9-next/soc
Thanks!
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 23 +++++++++++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 18 ++++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 880349b3f16c..550e9e7e3ff2 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -242,6 +242,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
}
EXPORT_SYMBOL(cmdq_pkt_write_s);
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+ struct cmdq_instruction inst = {};
+ int err;
+
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.mask = 0;
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ inst.src_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.src_reg = src_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
+
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 1f76cfedb16d..90d1d8e64412 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -61,6 +61,7 @@ enum cmdq_code {
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
CMDQ_CODE_WRITE_S = 0x90,
+ CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
};
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 9b0c57a0063d..53230341bf94 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -122,6 +122,24 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx);
/**
+ * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @src_reg_idx: the CMDQ internal register ID which cache source value
+ * @mask: the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask);
+
+/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
* @event: the desired event type to "wait and CLEAR"
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
