On Fri, Sep 18, 2020 at 01:47:18PM +0200, Yannick Fertre wrote: > From: Antonio Borneo <antonio.borneo@xxxxxx> > > The panel is able to receive commands in LP. The current hack to > force backlight commands in HS was due to workaround an incorrect > settings on DSI controller that prevents sending LP commands while > video out was active. > > Remove the hack that forces HS commands. > > Signed-off-by: Antonio Borneo <antonio.borneo@xxxxxx> This and the next are missing your s-o-b line. Also you've done a bunch of gpu patches arlready, want drm-misc commit rights so you can make sure they all do land? https://drm.pages.freedesktop.org/maintainer-tools/getting-started.html There's tons more docs about how the tooling and process works. Cheers, Daniel > --- > .../gpu/drm/panel/panel-orisetech-otm8009a.c | 18 ++---------------- > 1 file changed, 2 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c > index 6ac1accade80..f80b44a8a700 100644 > --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c > +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c > @@ -99,20 +99,6 @@ static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data, > dev_warn(ctx->dev, "mipi dsi dcs write buffer failed\n"); > } > > -static void otm8009a_dcs_write_buf_hs(struct otm8009a *ctx, const void *data, > - size_t len) > -{ > - struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > - > - /* data will be sent in dsi hs mode (ie. no lpm) */ > - dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > - > - otm8009a_dcs_write_buf(ctx, data, len); > - > - /* restore back the dsi lpm mode */ > - dsi->mode_flags |= MIPI_DSI_MODE_LPM; > -} > - > #define dcs_write_seq(ctx, seq...) \ > ({ \ > static const u8 d[] = { seq }; \ > @@ -400,7 +386,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd) > */ > data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS; > data[1] = bd->props.brightness; > - otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data)); > + otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data)); > > /* set Brightness Control & Backlight on */ > data[1] = 0x24; > @@ -412,7 +398,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd) > > /* Update Brightness Control & Backlight */ > data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY; > - otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data)); > + otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data)); > > return 0; > } > -- > 2.17.1 > -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
