Since we're about to start adding support for Intel's magic HDR
backlight interface over DPCD, we need to ensure we're properly
programming this field so that Intel specific sink services are exposed.
Otherwise, 0x300-0x3ff will just read zeroes.
We also take care not to reprogram the source OUI if it already matches
what we expect. This is just to be careful so that we don't accidentally
take the panel out of any backlight control modes we found it in.
Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
Cc: thaytan@xxxxxxxxxxxx
Cc: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp.c | 32 +++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4bd10456ad188..b591672ec4eab 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3428,6 +3428,7 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+ u8 edp_oui[] = { 0x00, 0xaa, 0x01 };
int ret, i;
/* Should have a valid DPCD by this point */
@@ -3443,6 +3444,14 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
} else {
struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
+ /* Write the source OUI as early as possible */
+ if (intel_dp_is_edp(intel_dp)) {
+ ret = drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, edp_oui,
+ sizeof(edp_oui));
+ if (ret < 0)
+ drm_err(&i915->drm, "Failed to write eDP source OUI\n");
+ }
+
/*
* When turning on, we need to retry for 1ms to give the sink
* time to wake up.
@@ -4530,6 +4539,23 @@ static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp)
}
}
+static void
+intel_edp_init_source_oui(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+ u8 oui[] = { 0x00, 0xaa, 0x01 };
+ u8 buf[3] = { 0 };
+
+ if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0)
+ drm_err(&i915->drm, "Failed to read source OUI\n");
+
+ if (memcmp(oui, buf, sizeof(oui)) == 0)
+ return;
+
+ if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0)
+ drm_err(&i915->drm, "Failed to write source OUI\n");
+}
+
static bool
intel_edp_init_dpcd(struct intel_dp *intel_dp)
{
@@ -4607,6 +4633,12 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
intel_dp_get_dsc_sink_cap(intel_dp);
+ /*
+ * Program our source OUI so we can make various Intel-specific AUX
+ * services available (such as HDR backlight controls)
+ */
+ intel_edp_init_source_oui(intel_dp);
+
return true;
}
--
2.26.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
