Re: [PATCH v3 0/4] drm/ast: Disable HW cursor when switching modes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ping for review

Am 13.08.20 um 15:51 schrieb Thomas Zimmermann:
> Since converting the ast driver to atomic modesettting, modesetting
> occationally locks up the graphics hardware and turns the display
> permanently dark. This happens once or twice per 10 mode switches.
> Investigation shows that the ast hardware presumably requires the HW
> cursor to be disabled while the modeswitch takes place.
> 
> This patchset fixes the problem by disabling planes before programming
> the CRTC mode. After the switch, the planes gets re-enabled if they were
> enabled before. For mere pageflip operations, nothing changes.
> 
> Patches #1 makes format changes work as intended: format registers are
> only updated if necessary. They used to be changed on each pageflip.
> 
> Patches #2 to #4 change the modesetting logic such that planes will be
> disabled with the CRTC, then the CRTC's new mode is being programmed,
> and finally planes are reenabled. The primary plane is enabled before
> the cursor plane. With this setup way, the cursor plane always has a
> valid mode and framebuffer available.
> 
> Tested on AST2100 HW. The issue is not 100% reproducible, but does not
> show up after applying the patchset. I think the problem has been fixed.
> 
> v3:
> 	* rewrote the patchset again
> 	* format setup is now done on primary-plane update
> 	* don't disable cursor for format changes (does not seem necessary)
> 	* disable planes in CRTC atomic_disable()
> 	* do modeset in atomic_enable()
> 	* drop Fixes tags; it's too complicated for a simple bugfix
> 
> v2:
> 	* rewrote the whole patchset
> 	* dropped the cursor patches
> 	* moved modesetting into atomic_begin()
> 	* disable planes in commit-tail function
> 	* don't require full modeset for format changes
> 
> Thomas Zimmermann (4):
>   drm/ast: Set format registers in primary plane's update
>   drm/ast: Disable planes while switching display modes
>   drm/ast: Program display mode in CRTC's atomic_enable()
>   drm/ast: Enable CRTC before planes
> 
>  drivers/gpu/drm/ast/ast_drv.h  |   2 +
>  drivers/gpu/drm/ast/ast_mode.c | 103 ++++++++++++++++++++-------------
>  2 files changed, 64 insertions(+), 41 deletions(-)
> 
> --
> 2.28.0
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux