On Tue, Sep 1, 2020 at 4:27 AM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Rob, > > On Mon, Aug 24, 2020 at 05:04:58PM -0600, Rob Herring wrote: > > On Mon, Aug 10, 2020 at 04:22:17PM +0100, Biju Das wrote: > > > Document optional vcc-supply property that may be used as VCC source. > > > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > > --- > > > New patch Ref: Ref:https://patchwork.kernel.org/patch/11705819/ > > > --- > > > .../devicetree/bindings/display/bridge/lvds-codec.yaml | 3 +++ > > > 1 file changed, 3 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > > > index 68951d56ebba..3248be31eceb 100644 > > > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > > > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > > > @@ -79,6 +79,9 @@ properties: > > > The GPIO used to control the power down line of this device. > > > maxItems: 1 > > > > > > + vcc-supply: > > > + maxItems: 1 > > > > Probably should be 'power-supply' to align with the 'simple' panels. > > That's also to signify there's only 1 supply. Using 'vcc' would > > encourage adding 'vdd-supply', 'vddio-supply', etc. A second supply I'll > > NAK because at that point it's not a simple bridge with no configuration > > (it's arguably already there). > > Fully agreed. > > Do I get your Ab or Rb line with s/vcc/power/ and the commit message > updated to > > dt-bindings: display: bridge: lvds-codec: Document power-supply property > > Document optional power-supply property that may be used to specify the > regulator powering up the device. > > ? Yes, if not too late. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel