Hi Morimoto-san,
Thank you for the patch.
On Tue, Sep 08, 2020 at 09:35:15AM +0900, Kuninori Morimoto wrote:
>
> From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
>
> This patch adds HDMI device nodes for R-Car M3-W+ (r8a77961) SoC.
> This patch was tested on R-Car M3-W+ Salvator-XS board.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a77961.dtsi | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
> index c7fabd9e875b..7f21491f6436 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
> @@ -2145,14 +2145,23 @@ port@1 {
> };
>
> hdmi0: hdmi@fead0000 {
> + compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi";
> reg = <0 0xfead0000 0 0x10000>;
> - /* placeholder */
> + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>;
> + clock-names = "iahb", "isfr";
> + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
> + resets = <&cpg 729>;
> + status = "disabled";
>
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> port@0 {
> reg = <0>;
> + dw_hdmi0_in: endpoint {
> + remote-endpoint = <&du_out_hdmi0>;
> + };
> };
> port@1 {
> reg = <1>;
> @@ -2191,6 +2200,7 @@ du_out_rgb: endpoint {
> port@1 {
> reg = <1>;
> du_out_hdmi0: endpoint {
> + remote-endpoint = <&dw_hdmi0_in>;
> };
> };
> port@2 {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
